You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. A Coupled System for Predicting SPE Fluxes

    SBC: PREDICTIVE SCIENCE INCORPORATED            Topic: T602

    Solar Particle Events (SPEs) represent a major hazard for extravehicular maneuvers by astronauts in Earth orbit, and for eventual manned interplanetary space travel. They can also harm aircraft avionics, communication and navigation. We propose to develop a system to aid forecasters in the prediction of such events, and in the identification/lengthening of "all clear" time periods when there is ...

    STTR Phase II 2016 National Aeronautics and Space Administration
  2. Active Radiation Shield

    SBC: GLOYER-TAYLOR LABORATORIES INC            Topic: T301

    DEC-Shield technology offers the means to generate electric power from cosmic radiation sources and fuse dissimilar systems and functionality into a structural component to create a Multi-functional Structure (MFS). DEC-Shield integrated into MFS technology can be used to generate electric power and provide radiation protection in a space vehicle; even maximizing that protection by spreading the ...

    STTR Phase I 2016 National Aeronautics and Space Administration
  3. Additive Manufacturing for Microwave Vacuum Electron Device Cost Reduction

    SBC: RADIABEAM TECHNOLOGIES, LLC            Topic: N16AT010

    The Department of the Navy has a need for the development of an additive manufacturing (AM) process for key vacuum electronic device components to meet on-demand, flexible, and affordable manufacturing requirements. The developed manufacturing method has a potential to reduce cost of vacuum electronics by as much as 70% as well as simplify and hence expedite production process of these devices by ...

    STTR Phase I 2016 Department of DefenseNavy
  4. Advanced Gas Sensing Technology for Space Suits

    SBC: INTELLIGENT OPTICAL SYSTEMS, INC.            Topic: T601

    The gas sensor in the PLSS of the ISS EMU will meet its projected life in 2020, and NASA is planning to replace it. At present, only high TRL devices based on infrared absorption are candidate replacements, because of their proven long-term stability, despite their size and power consumption and failures in the presence of liquid water. No current compact sensor has the tolerance for liquid water ...

    STTR Phase II 2016 National Aeronautics and Space Administration
  5. Air Cycle Machine Low Friction, Medium Temperature, Foil Bearing Coating

    SBC: ACREE TECHNOLOGIES INCORPORATED            Topic: N16AT005

    The purpose of this project is to demonstrate the feasibility of using an innovative, durable, low friction, and non-toxic solid lubricant coating for foil air bearings for air cycle machines (ACM). Acrees coating provides superior wear characteristics at all temperatures and provides a substantial improvement over polyimide type coatings that are currently used on ACMs. The coating consists of tw ...

    STTR Phase I 2016 Department of DefenseNavy
  6. An Additive Manufacturing Technique for the Production of Electronic Circuits

    SBC: Morningbird Media Corporation            Topic: T1204

    The proposed 9-month research project aims for the development of additive manufacturing techniques for the creation of electronic devices. It will develop an innovative additive manufacturing technique that combines the ink-based printing with laser melting technology to directly print a three-dimensional (3D) system with built-in electrical properties and functioning as an electronic device. Th ...

    STTR Phase I 2016 National Aeronautics and Space Administration
  7. A Novel, Membrane-Based Bioreactor Design to Enable a Closed-Loop System on Earth and Beyond

    SBC: MANGO MATERIALS INC            Topic: T604

    The proposed innovation is a membrane bioreactor system to produce a biopolymer from methane gas. This new methane fermentation process will expand and advance current gas delivery techniques to create affordable fermentation methods on Earth and beyond. Mango Materials is currently working to scale up and commercialize the production of polyhydroxyalkanoate (PHA) from methane, but its scaled-up ...

    STTR Phase I 2016 National Aeronautics and Space Administration
  8. Bonded Joint Analysis Method

    SBC: M4 ENGINEERING, INC.            Topic: N12AT004

    During Phase I and Phase II, M4 Engineering, Inc. and Sandia National Laboratories have created a unique bonded joint analysis methodology and associated software. During Phase II.5, the developed techniques will be further enhanced and a fully functional commercial analysis code (SIMULIA/Abaqus) plug-in will be created. The software plug-in will make the advanced technology accessible to all leve ...

    STTR Phase II 2016 Department of DefenseNavy
  9. 3D Acoustic Model for Geometrically Constrained Environments

    SBC: HEAT, LIGHT, AND SOUND RESEARCH, INC.            Topic: N16AT018

    Systems that operate in constrained environments depend on the acoustics in several ways. Harbor defense systems detect intruders (people and/or vessels) by either listening for their noises (passively) or by pinging on them and detecting their echoes (actively). Furthermore, such systems may also form the equivalent of an underwater cell phone network using sound to carry the information. The aco ...

    STTR Phase I 2016 Department of DefenseNavy
  10. Development of a Micro-glider for Oceanographic Air-Sea Interaction Sampling

    SBC: MRV SYSTEMS LLC            Topic: N14AT020

    This proposal is a collaborative effort between MRV Systems and the Woods Hole Oceanographic Institution. The goal is to develop a new, small, inexpensive autonomous vehicle to investigate mixed layer dynamics and turbulent mixing. The preliminary Phase I design, a Diagonally Operating Platform (DOP), is a profiling float with moveable fins. DOP will turn toward an intended direction within a few ...

    STTR Phase II 2016 Department of DefenseNavy
US Flag An Official Website of the United States Government