You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Broad Spectrum Optical Property Characterization

    SBC: SPECTRAL MOLECULAR IMAGING, INC.            Topic: AF15AT12

    Liquid Crystal Arrayed Microcavities (LCAM) are a new hyperspectral technology initiated by collaboration among Spectral Molecular Imaging, Advanced Microcavity Sensors and Montana State University Spectrum Laboratory.At the core of this revolutionary technology lie picoliter volume optical cavities that exploit liquid crystal birefringence for tuning an effective cavity length.During a Phase I on ...

    STTR Phase II 2016 Department of DefenseAir Force
  2. CyberSTEPS- Cyber Skills Training with Electronic Performance Support

    SBC: Tier 1 Performance Solutions, LLC            Topic: AF16AT08

    There are many challenges in creating Air Force systems that are resilient against cyber threats. The cyber environment and its threats are highly dynamic, requiring practices and training to be dynamic as well. Cyber threats must be considered during th...

    STTR Phase I 2016 Department of DefenseAir Force
  3. Development of powder bed printing (3DP) for rapid and flexible fabrication of energetic material payloads and munitions

    SBC: MAKEL ENGINEERING, INC.            Topic: DTRA16A001

    This program will demonstrate how additive manufacturing technologies can be used with reactive and high energy materials to create rapid and flexible fabrication of payload and munitions. Our primary approach to this problem will be to use powder bed binder printing techniques to print reactive structures. The anticipated feedstock will consist of composite particles containing all reactant spe ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  4. Development of Adaptive Closure Models for Large Eddy Simulations of Lean Blow-Out Conditions

    SBC: CFD Research Corporation            Topic: AF16AT14

    Next-generation turbulent combustion models must enable accurate prediction of lean blow-out and flashback for complex geometries, fuels and operating conditions relevant to the Air Force. Improved models are needed to better predict kinetically and hydr...

    STTR Phase I 2016 Department of DefenseAir Force
  5. DREAMIT- Design, Reconfigure and Evaluate Autonomous Models in Training

    SBC: Tier 1 Performance Solutions, LLC            Topic: AF15AT14

    Our Phase I work focused on improving modeling and simulations so that the impact of autonomous systems in the battlespace could be better understood. As we have trained our attention on Phase II, it has become increasingly clear that the work we are doing to improve the modeling and simulation of autonomous systems also provides significant leverage for the development of the intelligent behavior ...

    STTR Phase II 2016 Department of DefenseAir Force
  6. Embedded Sensors for Flight Test (Every Aircraft a Test Aircraft)

    SBC: Nextgen Aeronautics, Inc.            Topic: AF14AT01

    Increasing system capabilities in terms of weapon systems, ISR payloads, GNC, etc., enabled by smaller and more capable electronics systems have led to a trend for overall size reduction in military aircraft. This has resulted in a reduction in the avail...

    STTR Phase II 2016 Department of DefenseAir Force
  7. Environmentally-Compliant Kinetic Metallization Coating Materials for Corrosion and Wear Protection of Military Aircraft and Weapon Systems

    SBC: INNOVATIVE TECHNOLOGY INC            Topic: AF15AT31

    Coating materials and coating methods used to protect U.S. military aircraft and weapon systems from corrosion and wear are in need of environmentally benign alternatives in order to keep up with dynamic regulations associated with environment, safety, and occupational health. Thus, the Air Force is supporting research to develop alternatives to the dangerous materials identified on the OSD Emergi ...

    STTR Phase II 2016 Department of DefenseAir Force
  8. GeSn High-Performance IR Detectors and Emitters

    SBC: APIC CORPORATION            Topic: AF16AT28

    Tensile-strained germanium tin structures will be developed for infrared emitters and detectors that are compatible with silicon fabrication processes.Optical detectors in the wavelength range of 2-5 microns will be developed by using GeSn on silicon ...

    STTR Phase I 2016 Department of DefenseAir Force
  9. High-Sensitivity Monolithic Silicon CMOS APD and ROIC

    SBC: Freedom Photonics LLC            Topic: AF14AT13

    This work will focus on the development of monolithic SWIR focal plane array technologies using CMOS or CMOS compatible fabrication technology. This will be realized on a Silicon substrate and incorporate APD+TIA arrays and be scalable to Megapixel arrays and coherent receiver operation for capture of the full optical wavefront vector information.

    STTR Phase II 2016 Department of DefenseAir Force
  10. Higher Order Mesh Generation for Simulation of Complex Systems

    SBC: Hypercomp, Inc.            Topic: AF14AT07

    In this program, HyPerComp and University of Michigan have teamedtogether to develop a high-order grid generator for Euler and viscousmeshes. The grid generator is based on HyPerComps successful generalpurpose CAD2Mesh software and is being integrated with HyPerCompsHDphysics and U. Michigans XFlow DG high-order solvers. High-order gridgeneration methods are being implemented to accurately capture ...

    STTR Phase II 2016 Department of DefenseAir Force
US Flag An Official Website of the United States Government