You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Vertical GaN Substrates

    SBC: Sixpoint Materials, Inc.            Topic: DEFOA0000941

    SixPoint Materials will create low-cost, high-quality vertical gallium nitride (GaN) substrates using a multi-phase production approach that employs both hydride vapor phase epitaxy (HVPE) technology and ammonothermal growth techniques to lower costs and maintain crystal quality. Substrates are thin wafers of semiconducting material needed for power devices. In its two-phase project, SixPoint Mate ...

    STTR Phase II 2014 Department of EnergyARPA-E
  2. Epitaxial GaN on flexible metal tapes for low-cost transistor devices

    SBC: IBEAM MATERIALS, INC.            Topic: 1

    GaN-based devices are the basis of a variety of modern electronics applications, especially in optoelectronics and high-frequency / high-power electronics. These devices are based on epitaxial films grown on single-crystal wafers. The single-crystal wafer substrates are limiting because of their size, expense, mechanical properties and availability. If one could make GaN-based devices over large a ...

    STTR Phase II 2014 Department of EnergyARPA-E
  3. Retrofittable and Transparent Super-Insulator for Single-Pane Windows

    SBC: NANOSD, INC.            Topic: DEFOA0001429

    NanoSD, Inc. with its partners will develop a transparent, nanostructured thermally insulating film that can be applied to existing single-pane windows to reduce heat loss. To produce the nanostructured film, the team will create hollow ceramic or polymer nanobubbles and consolidate them into a dense lattice structure using heat and compression. Because it is mostly air, the resulting nanobubble s ...

    STTR Phase II 2016 Department of EnergyARPA-E
  4. Epitaxial GaN on Flexible Metal Tapes for Low-Cost Transistor Devices

    SBC: IBEAM MATERIALS, INC.            Topic: DEFOA0000941

    GaN-based devices are the basis of a variety of modern electronics applications, especially in optoelectronics and high-frequency / high-power electronics. These devices are based on epitaxial films grown on single-crystal wafers. The single-crystal wafer substrates are limiting because of their size, expense, mechanical properties and availability. If one could make GaN-based devices over large a ...

    STTR Phase II 2016 Department of EnergyARPA-E
  5. High-Fidelity Prediction of Launch Vehicle Lift-off Acoustic Environment

    SBC: CFD Research Corporation            Topic: T101

    Launch vehicles experience extreme acoustic loads during liftoff driven by the interaction of rocket plumes and plume-generated acoustic waves with ground structures. Currently employed predictive capabilities are too dissipative to accurately resolve the propagation of waves throughout the launch environment. Higher fidelity non-dissipative analysis tools are critically needed to design mitigatio ...

    STTR Phase II 2014 National Aeronautics and Space Administration
  6. Particle Flow Physics Modeling for Extreme Environments

    SBC: CFD Research Corporation            Topic: T403

    The liberation of particles induced by rocket plume flow from spacecraft landing on unprepared regolith of the Moon, Mars, and other destinations poses high mission risks for robotic and human exploration activities. This process occurs in a combination of "extreme environments" that combine low gravity, little or no atmosphere, rocket exhaust gas flow that is supersonic and partially rarefied, an ...

    STTR Phase II 2014 National Aeronautics and Space Administration
  7. Materials and Structures Optimization / Process Development for the Mega-ROSA / ROSA Solar Array

    SBC: Deployable Space Systems, Inc.            Topic: T301

    Deployable Space Systems, Inc. (DSS), in collaboration with the University of California, Santa Barbara (UCSB), Department of Mechanical Engineering, will focus the proposed NASA STTR Phase 2 program on the materials optimization, structures optimization, creep / relaxation phenomena characterization and analytical modeling, and manufacturing process optimization/development for the Mega-ROSA/ROSA ...

    STTR Phase II 2013 National Aeronautics and Space Administration
  8. Power Generating Coverings and Casings

    SBC: Streamline Automation, LLC            Topic: T301

    Advances in structured heterogeneity together with nanomaterials tailoring has made it possible to create thermoelectrics using high temperature, polymer composites. While such thermoelectrics do not have the capability to approach the efficiency of top performing ceramic modules such as BiTe, they do provide two unique aspects of use in energy scavenging: the ability to conform to irregular large ...

    STTR Phase II 2014 National Aeronautics and Space Administration
  9. Advanced Deposition Capability for Oxidation & Corrosion Protection Coatings

    SBC: Directed Vapor Technologies International, Inc.            Topic: T1201

    NASA's long range goals of reducing fuel consumption by 30% and increasing fuel efficiency by 35% can be partially accomplished through increasing the operation temperatures of gas turbine engines. The advent of advanced alloys, coatings, cooling technologies and ceramic components has created the potential for significant increases in the hot section of these engines; however, these advances wil ...

    STTR Phase II 2014 National Aeronautics and Space Administration
  10. Modular Electric Propulsion Test Bed Aircraft

    SBC: ROLLING HILLS RESEARCH CORP            Topic: T901

    A hybrid electric aircraft simulation system and test bed is proposed to provide a dedicated development environment for the rigorous study and advancement of hybrid electric powered aircraft. The new test bed and simulation system will provide a dedicated platform and set of analysis tools to study, design, and test hybrid electric powered propulsion components and systems for use in commercial, ...

    STTR Phase II 2014 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government