You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Inspire- In-Mask Sensors for Physiological Investigation of Respiratory Exhalation

    SBC: MAKEL ENGINEERING, INC.            Topic: DHP16C002

    High concentrations of supplemental oxygen are used routinely by pilots and divers prior to and during missions to prevent and treat decompression sickness, avoid detection during covert operations, and to support oxygenation following pulmonary injury. Due to pulmonary oxygen toxicity (PO2T), exposure limits are imposed to prevent damage to pulmonary tissues. Current policy focuses on preventing ...

    STTR Phase II 2021 Department of DefenseDefense Health Agency
  2. Computer Vision Image Interpretation for 3D Model Reconstruction

    SBC: TOYON RESEARCH CORPORATION            Topic: DTRA18B001

    Toyon Research Corporation (Toyon) and the University of California, Santa Barbara (UCSB) propose research, development, and demonstration of algorithms and an efficient software prototype for 3D model reconstruction using single images collected via remote sensing. In particular, the effort is focused on processing of high-resolution commercial satellite images for 3D reconstruction of buildings. ...

    STTR Phase II 2021 Department of DefenseDefense Threat Reduction Agency
  3. ECCCHO: Effective Combat Casualty Care Handoff Operations

    SBC: Tier 1 Performance Solutions, LLC            Topic: DHA17B002

    According to the Joint Commission, approximately 70% of sentinel events in medical care are related to communication mishaps, and despite regular and frequent occurrence, poor communication during patient handoffs (i.e., transfer of patient care information, responsibility, and authority from one provider to another) remains a major contributor to medical errors (Nether, 2017; The Joint Commission ...

    STTR Phase II 2021 Department of DefenseDefense Health Agency
  4. CORE-Military: A Virtual Reality Platform for Emergency Care Training and Assessment in Austere Environments

    SBC: Radiant Images Inc.            Topic: DHA20B001

    In emergency medicine, time is a critical factor that can significantly influence the survival of seriously ill patients. Early recognition of clinical deterioration and rapid initial management is paramount in any setting where emergency care is provided. In military medicine and humanitarian care, delivering high quality and timely care to injured patients poses even greater and more complex cha ...

    STTR Phase I 2021 Department of DefenseDefense Health Agency
  5. Integrated Circuits

    SBC: NU TREK INC            Topic: DTRA20B002

    The Nu-Trek team is proposing to develop µDet, a low Size, Weight, and Power (SWaP) read out integrated circuit (IC) for gamma and neuron detectors. µDet offers pulse shape digitization, which in turn enables gamma-neutron discrimination. This is a game changing capability that brings laboratory-level functionality to the field. In Phase I the Nu-Trek Team will develop a baseline design for the ...

    STTR Phase I 2021 Department of DefenseDefense Threat Reduction Agency
  6. A Microfluidic Impedance-Based Bacteriophage Capture and Antibiofilm Analyzer

    SBC: CFD Research Corporation            Topic: DHA20B003

    The twenty-first century has seen a global rise in bacterial infections exhibiting antimicrobial-resistance (AMR). More than ninety percent of chronic wounds contain microbial biofilms that exhibit AMR, and the bacteria responsible for several of these recalcitrant infections are called ESKAPEE pathogens. Eradicating ESKAPEE pathogenic infections is challenging, but bacteriophage (phage) therapy i ...

    STTR Phase I 2021 Department of DefenseDefense Health Agency
  7. In-Ear Exposure Sensor with Integrated Noise Attenuation and Communications Capabilities

    SBC: Diversified Technical Systems, Inc.            Topic: DHA20B002

    According to the Department of Defense, there were more than 400,000 known TBI diagnoses in service members between 2000 and 2019 (DVBIC, 2020). Detection and measurement of potential injury due to blast overpressure and blunt impact have been priorities of the US military for many years, especially since Operation Enduring Freedom (OEF). Among those deployed, estimated rates of probable TBI range ...

    STTR Phase I 2021 Department of DefenseDefense Health Agency
  8. Eye-readable Solution-based Dye Displacement Probe for Large-area Detection of Opioids

    SBC: Intelligent Optical Systems, Inc.            Topic: CBD20AT001

    Intelligent Optical Systems, Inc., in collaboration with Bowling Green State University, proposes to develop a field-rugged, eye-readable indicating spray solution that can immediately detect synthetic opioids over a large area of contamination (i.e., military vehicles, individual protective equipment, clandestine labs, etc.). The proposed chemosensor in a spray solution format will detect multipl ...

    STTR Phase I 2021 Department of DefenseOffice for Chemical and Biological Defense
  9. Information Salience

    SBC: DISCERNING TECHNOLOGIES, LLC            Topic: OSD11TD1

    Empirical-based mathematical framework and computer algorithms, for representing human perception and cognition processes and limitations, which influence the recognition of salient information about rapidly changing events.

    STTR Phase II 2015 Department of DefenseOffice of the Secretary of Defense
  10. Development of powder bed printing (3DP) for rapid and flexible fabrication of energetic material payloads and munitions

    SBC: MAKEL ENGINEERING, INC.            Topic: DTRA16A001

    This program will demonstrate how additive manufacturing technologies can be used with reactive and high energy materials to create rapid and flexible fabrication of payload and munitions. Our primary approach to this problem will be to use powder bed binder printing techniques to print reactive structures. The anticipated feedstock will consist of composite particles containing all reactant spe ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
US Flag An Official Website of the United States Government