You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Active Radiation Shield

    SBC: Gloyer-Taylor Laboratories Inc.            Topic: T301

    DEC-Shield technology offers the means to generate electric power from cosmic radiation sources and fuse dissimilar systems and functionality into a structural component to create a Multi-functional Structure (MFS). DEC-Shield integrated into MFS technology can be used to generate electric power and provide radiation protection in a space vehicle; even maximizing that protection by spreading the ...

    STTR Phase I 2016 National Aeronautics and Space Administration
  2. Additive Manufacture of Refractory Metal Propulsion Components

    SBC: Geoplasma, LLC            Topic: T9

    Niobium alloy (C-103) reaction control system (RCS) chambers have been used on numerous NASA programs. However at elevated temperatures, the strength of C-103 decreases significantly. Higher strength niobium alloys have been developed, but these alloys lack the formability of C-103. Recently, Additive Manufacture (AM) of niobium and C-103 has been demonstrated using powder bed electron beam me ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  3. An Additive Manufacturing Technique for the Production of Electronic Circuits

    SBC: MORNINGBIRD MEDIA CORPORATION            Topic: T1204

    The proposed 9-month research project aims for the development of additive manufacturing techniques for the creation of electronic devices. It will develop an innovative additive manufacturing technique that combines the ink-based printing with laser melting technology to directly print a three-dimensional (3D) system with built-in electrical properties and functioning as an electronic device. Th ...

    STTR Phase I 2016 National Aeronautics and Space Administration
  4. A Novel, Membrane-Based Bioreactor Design to Enable a Closed-Loop System on Earth and Beyond

    SBC: Mango Materials, Inc.            Topic: T604

    The proposed innovation is a membrane bioreactor system to produce a biopolymer from methane gas. This new methane fermentation process will expand and advance current gas delivery techniques to create affordable fermentation methods on Earth and beyond. Mango Materials is currently working to scale up and commercialize the production of polyhydroxyalkanoate (PHA) from methane, but its scaled-up ...

    STTR Phase I 2016 National Aeronautics and Space Administration
  5. A Scalable Gas-Particle Flow Simulation Tool for Lander Plume-Surface Interaction and Debris Prediction

    SBC: CFD Research Corporation            Topic: T9

    Spacecraft propulsive landings on unprepared regolith present in extra-terrestrial environments pose a high risk for space exploration missions. Plume/regolith interaction results in (1) the liberation of dust and debris particles that may collide with the landing vehicle and (2) craters whose shape itself can influence vehicle dynamics. To investigate such gas-granular interactions for large-scal ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  6. Chip-scale THz Spectrometer

    SBC: NEXUS PHOTONICS, LLC            Topic: T8

    We propose to revolutionize the field of frequency-domain terahertz (THz) spectrometers by developing ~2 cm3 wide-band spectrometer with improved frequency accuracy, resolution and stability. Integration will also provide significant SWaP-C advantage compared to present solution allowing deployment in small spacecraft platforms and other applications where low SWaP is crucial.Compared to presently ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  7. Development of an Advanced Diamond TEC Cathode

    SBC: IOP Technologies LLC            Topic: T603

    NASA recognizes the importance of conservation, smart utilization and reuse of resources for their deep space missions to address the need for regeneration of air, water and waste with highly reliable systems to reduce mission payload. Additionally, energy for life support and other systems needs to be obtained from renewable energy sources or waste streams. In order to address NASA's requirements ...

    STTR Phase I 2016 National Aeronautics and Space Administration
  8. Development of powder bed printing (3DP) for rapid and flexible fabrication of energetic material payloads and munitions

    SBC: MAKEL ENGINEERING, INC.            Topic: DTRA16A001

    This program will demonstrate how additive manufacturing technologies can be used with reactive and high energy materials to create rapid and flexible fabrication of payload and munitions. Our primary approach to this problem will be to use powder bed binder printing techniques to print reactive structures. The anticipated feedstock will consist of composite particles containing all reactant spe ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  9. Efficient CO2 and H2O Removal with Novel Adsorbentsfor Life Support Applications on Mars

    SBC: MOSAIC MATERIALS, INC.            Topic: T6

    Very low CO2 concentrations that accumulate quickly from human respiration can have dramatic health effects, and thus in NASA’s history many technical removal strategies for CO2 from a confined atmosphere have been suggested and explored. A CO2 removal system that functions in a is a new area of research, as the primary CO2 removal component in the state-of-the-art system doesn’t have the adso ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  10. Infectious Disease Diagnostics and Differentiation of Viral vs. Bacterial Infections for Point of Care Applications

    SBC: GENECAPTURE            Topic: CBD15C001

    The modern warfighter faces the constant threat of endemic infections, multi-drug resistant bacteria and Biological Warfare Agents. In order to provide accurate front-line treatment that will curtail the overuse of antibiotics, a rapid and robust molecula

    STTR Phase I 2016 Department of DefenseOffice for Chemical and Biological Defense
US Flag An Official Website of the United States Government