You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Lightweight, Stable Optical Bench with Integrated Vibration Attenuation

    SBC: SAN DIEGO COMPOSITES, INC.            Topic: MDA13T007

    The goal of this program is to design a lightweight optical bench capable of remaining stable under temperature and moisture changes, while isolating the precision optical array from vibrations such as engine noise and air turbulence. By integrating a customizable periodic stack in the bench, vibrations are attenuated more effectively than commercially available mounts. Additionally, the periodic ...

    STTR Phase II 2016 Department of DefenseMissile Defense Agency
  2. Microelectronics Component Adhesive Selection and Design Rules for Failure Avoidance

    SBC: CFD Research Corporation            Topic: MDA14T002

    Thermally induced fatigue and residual stress introduced during fabrication are sources of failure in microelectronics, which raises reliability concerns for MDA and its system integrators. CFDRC has teamed with experts in the reliability of microelectronics packaging to develop a physics based modeling and testing protocol to correlate material properties and thermal loading conditions to stress ...

    STTR Phase II 2016 Department of DefenseMissile Defense Agency
  3. Development of powder bed printing (3DP) for rapid and flexible fabrication of energetic material payloads and munitions

    SBC: MAKEL ENGINEERING, INC.            Topic: DTRA16A001

    This program will demonstrate how additive manufacturing technologies can be used with reactive and high energy materials to create rapid and flexible fabrication of payload and munitions. Our primary approach to this problem will be to use powder bed binder printing techniques to print reactive structures. The anticipated feedstock will consist of composite particles containing all reactant spe ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  4. Rapid Development of Weapon Payloads via Additive Manufacturing

    SBC: Matsys Incorporated            Topic: DTRA16A001

    MATSYS proposes to adapt emerging additive manufacturing techniques (so-called 3-D Printing) for use with reactive structural materials and demonstrate this capability to rapidly fabricate reactive case. Our concept incorporates two major manufacturing steps: 3D printing of green compacts from pure Al or Al-based reactive powder blend; and Microwave (MW) sintering of green compacts into net-shaped ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  5. Self-fragmenting Structural Reactive Materials (SF-SRM) for High Combustion Efficiency

    SBC: Matsys Incorporated            Topic: DTRA16A002

    MATSYS proposes to develop, test and evaluate a scalable metal-based reactive structural material that will self-fragment to micron or sub-micron scale fuel particles when subjected to explosive shock loading, resulting in significantly enhanced metal combustion efficiency. Use of reactive material casings offers the potential for several-fold increases in blast and overpressure by generating rapi ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  6. Innovative Mitigation of Radiation Effects in Advanced Technology Nodes

    SBC: Reliable MicroSystems, LLC            Topic: DTRA16A003

    Establish a radiation-aware analysis capability in a commercial EDA design flow that will enable first-pass success in radiation-hardened by design (RHBD) for DoD ASICs in much the same way that existing EDA design suites ensure first pass functionality and performance success of complex ASICs destined for commercial applications. Layout-aware, calibrated single-event radiation models that captur ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  7. Modular Pulse Charger and Laser Triggering System for Large-Scale EMP and HPM Applications

    SBC: SCIENTIFIC APPLICATIONS & RESEARCH ASSOCIATES, INC.            Topic: DTRA16A004

    For effective protection against EMP and HPM threats, it is important to understand the physics of the threats, and also to quantify the effects they have on electrical systems. EMP and HPM vulnerability testing requires delivery of high peak power and electric fields to distant targets. The most practical solution to simulate such environments is to develop a modular, optically-isolated MV-antenn ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  8. Contextual Reasoning for Object Identification

    SBC: Novateur Research Solutions, LLC            Topic: MDA15T001

    This Small Business Technology Transfer project will develop a mathematical framework and enabling technologies for context-aware target classification and selection for missile defense systems in the presence of counter-measures and clutter in realistic scenarios. Based on statistical relationship learning (SRL) methodology, the proposed framework can reason simultaneously about multiple entries ...

    STTR Phase I 2016 Department of DefenseMissile Defense Agency
  9. Robust Classification through Deep Learning and Dynamic Multi-Entity Bayesian Reasoning

    SBC: ExoAnalytic Solutions, Inc.            Topic: MDA15T001

    Missile defense faces the challenges of rapidly maturing and evolving complex threats, possessing capabilities which require the use of all available resources to successfully detect, track and identify the lethal objects. Future performance will rely on multiple sensors such as ground and sea based radars and electro-optical and infrared sensors for target recognition. It is crucial to develop a ...

    STTR Phase I 2016 Department of DefenseMissile Defense Agency
  10. System of Systems Control Interactions

    SBC: Torch Technologies, Inc.            Topic: MDA15T002

    Control Theory tools and processes for analyzing the interactions of complex System of Systems (SoS) are lacking, specifically when sub-systems are independently designed and/or higher levels of SoS controls are applied. Integrating these sub-systems into the SoS, can result in dynamic interactions between these sub-systems and the SoS controls resulting in unexpectedly large deviations between ex ...

    STTR Phase I 2016 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government