You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. PIEZOELECTRIC STEP AND REPEAT HYDRAULIC MOTOR

    SBC: Dynamic Structures And Materials, LLC            Topic: N/A

    The Phase II development of the hybrid piezoelectric

    STTR Phase I 2001 Department of DefenseDefense Advanced Research Projects Agency
  2. Piezoelectric Pump Utilizing Innovative Non-Mechanical Active Valves

    SBC: KINETIC CERAMICS, LLC            Topic: N/A

    The objective of this program is to develop and make ready for commercial production a novel pump design utilizing piezoelectric pumping elements combined with fast acting non mechanical active valves and a miniature digital controller. The piezoelectricactuator is an available building block that has a proven track record, surviving 3x109 cycles in diesel fuel injectors. Available conventional va ...

    STTR Phase I 2001 Department of DefenseDefense Advanced Research Projects Agency
  3. Development of powder bed printing (3DP) for rapid and flexible fabrication of energetic material payloads and munitions

    SBC: MAKEL ENGINEERING, INC.            Topic: DTRA16A001

    This program will demonstrate how additive manufacturing technologies can be used with reactive and high energy materials to create rapid and flexible fabrication of payload and munitions. Our primary approach to this problem will be to use powder bed binder printing techniques to print reactive structures. The anticipated feedstock will consist of composite particles containing all reactant spe ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  4. Rapid Development of Weapon Payloads via Additive Manufacturing

    SBC: Matsys Incorporated            Topic: DTRA16A001

    MATSYS proposes to adapt emerging additive manufacturing techniques (so-called 3-D Printing) for use with reactive structural materials and demonstrate this capability to rapidly fabricate reactive case. Our concept incorporates two major manufacturing steps: 3D printing of green compacts from pure Al or Al-based reactive powder blend; and Microwave (MW) sintering of green compacts into net-shaped ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  5. Self-fragmenting Structural Reactive Materials (SF-SRM) for High Combustion Efficiency

    SBC: Matsys Incorporated            Topic: DTRA16A002

    MATSYS proposes to develop, test and evaluate a scalable metal-based reactive structural material that will self-fragment to micron or sub-micron scale fuel particles when subjected to explosive shock loading, resulting in significantly enhanced metal combustion efficiency. Use of reactive material casings offers the potential for several-fold increases in blast and overpressure by generating rapi ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  6. Innovative Mitigation of Radiation Effects in Advanced Technology Nodes

    SBC: Reliable MicroSystems, LLC            Topic: DTRA16A003

    Establish a radiation-aware analysis capability in a commercial EDA design flow that will enable first-pass success in radiation-hardened by design (RHBD) for DoD ASICs in much the same way that existing EDA design suites ensure first pass functionality and performance success of complex ASICs destined for commercial applications. Layout-aware, calibrated single-event radiation models that captur ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  7. Modular Pulse Charger and Laser Triggering System for Large-Scale EMP and HPM Applications

    SBC: SCIENTIFIC APPLICATIONS & RESEARCH ASSOCIATES, INC.            Topic: DTRA16A004

    For effective protection against EMP and HPM threats, it is important to understand the physics of the threats, and also to quantify the effects they have on electrical systems. EMP and HPM vulnerability testing requires delivery of high peak power and electric fields to distant targets. The most practical solution to simulate such environments is to develop a modular, optically-isolated MV-antenn ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  8. Analog Co-Processors for Complex System Simulation and Design

    SBC: Arete Associates            Topic: ST15C002

    It has long been known that analog computers can be faster and more power efficient than digital processors by many orders of magnitude. Until the 1970s analog computers were the dominant controllers in most industrial and military applications. Even today digital processors are still slower and more power consumptive than analog, but offer much more flexibility (programmability) and precision. ...

    STTR Phase I 2016 Department of DefenseDefense Advanced Research Projects Agency
  9. Revolutionary Airlift Innovation

    SBC: Logistic Gliders Inc.            Topic: ST14B004

    We propose to mature LG-X glider technology by manufacturing full-scaled prototypes and characterizing them in land-based flight-testing by using commercial aircraft to drop the gliders. Validated components such as the landing parachute, folding wing mechanism, and autopilot control system will undergo integrated flight-testing. Logistic Gliders will provide a considerable cost share to support ...

    STTR Phase II 2016 Department of DefenseDefense Advanced Research Projects Agency
US Flag An Official Website of the United States Government