You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Innovative Mitigation of Radiation Effects in Advanced Technology Nodes

    SBC: Reliable MicroSystems, LLC            Topic: DTRA16A003

    Establish a radiation-aware analysis capability in a commercial EDA design flow that will enable first-pass success in radiation-hardened by design (RHBD) for DoD ASICs in much the same way that existing EDA design suites ensure first pass functionality and performance success of complex ASICs destined for commercial applications. Layout-aware, calibrated single-event radiation models that captur ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  2. Modular Pulse Charger and Laser Triggering System for Large-Scale EMP and HPM Applications

    SBC: SCIENTIFIC APPLICATIONS & RESEARCH ASSOCIATES, INC.            Topic: DTRA16A004

    For effective protection against EMP and HPM threats, it is important to understand the physics of the threats, and also to quantify the effects they have on electrical systems. EMP and HPM vulnerability testing requires delivery of high peak power and electric fields to distant targets. The most practical solution to simulate such environments is to develop a modular, optically-isolated MV-antenn ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  3. Deriving Bone Density from Thoracic CT Scans

    SBC: BDI, Inc.            Topic: NIAMS

    PROJECT SUMMARY ABSTRACT As people age they steadily lose bone mass and their bones become fragile and increasingly prone to hip and other fractures and this can prove fatal The American College of Radiology therefore recommends that assessment of bone mineral density BMD be performed in post menopausal women and all people over the age of every two years If indicated preventive measure ...

    STTR Phase I 2016 Department of Health and Human ServicesNational Institutes of Health
  4. Provably Unclonable Functions on Re-configurable Devices

    SBC: IERUS TECHNOLOGIES, INC            Topic: A18BT001

    The ability to authenticate electronic devices is an important step towards modernizing the hardware/software of our Nations communication systems. Protecting these targeted networks and devices from malicious cyber-based attacks is becoming increasingly important as the technological and cyber capabilities of our adversaries continue to advance. In addition to network security, device authenticat ...

    STTR Phase I 2018 Department of DefenseArmy
  5. Acoustically/Vibrationally Enhanced High Frequency Electromagnetic Detector for Buried Landmines

    SBC: AKELA INC            Topic: A16AT004

    Laboratory investigations have suggested that acoustically or vibrationally inducing motion in buried targets can aid in improving target detectability through a characteristic response related to differential target motion. This gain is realized by adding an additional degree of freedom, modulation due to motion in the GPR return signal, to use as a discriminating feature. The AKELA team is propo ...

    STTR Phase I 2016 Department of DefenseArmy
  6. Portable and Automated Radiation Effects Test Structures for Advanced Technology Nodes

    SBC: MICROELECTRONICS RESEARCH DEVELOPMENT CORPORATION            Topic: DTRA16A003

    Micro-RDC will develop portable radiation effects test structures that scales to new process nodes. These structures will enable the investigation of the effects of radiation on the new technology from the material processing level as well as the circuit level. The production of the chosen structures and the development of software to extract the model parameters will form the framework. A suit ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  7. Energy Harvesting Fabric

    SBC: Streamline Automation, LLC            Topic: A15AT017

    A human produces more than 100 Watts of waste heat during normal activity. If a fraction of this heat energy can be harvested it can replace the stored chemical energy in one or more of the batteries typically carried by soldiers in the field. The current generation batteries, such as the BB2590 are bulky and rigid. The PowerFelt material developed by Wake Forest University is ideally suited for h ...

    STTR Phase I 2016 Department of DefenseArmy
  8. Bone targeted antimicrobials for biofilm-mediated osteolytic infection treatment

    SBC: BIOVINC, LLC            Topic: NIDCR

    DESCRIPTION provided by applicant Infectious bone disease is a major cause of morbidity and mortality worldwide Successful treatment often requires surgical intervention with longer term antibiotic therapy Bacterial biofilm pathogens are associated with most osseous infections and represent a major target of therapy The biofilm pathogens associated with chronic bone infections bind to and co ...

    STTR Phase I 2016 Department of Health and Human ServicesNational Institutes of Health
  9. Sonomyographic Control of Fiber-Optically Sensorized Prosthetic Fingers for Graded Force Actuation

    SBC: Intelligent Fiber Optic Systems Corporation            Topic: NINDS

    Sonomyographic Control of Fiber Optically Sensorized Prosthetic Fingers for Graded Force Actuation Intelligent Fiber Optic Systems CorporationIFOSCalle del MundoSanta ClaraCAwww ifos com PROJECT SUMMARY ABSTRACTMAXIMUMLINESIn this Phase I SBIR applicationIFOS and George Mason UniversityGMUpropose an innovative control system leveraging on two emerging technologiesultrasonic imaging based readout o ...

    STTR Phase I 2018 Department of Health and Human ServicesNational Institutes of Health
  10. Development of powder bed printing (3DP) for rapid and flexible fabrication of energetic material payloads and munitions

    SBC: MAKEL ENGINEERING, INC.            Topic: DTRA16A001

    This program will demonstrate how additive manufacturing technologies can be used with reactive and high energy materials to create rapid and flexible fabrication of payload and munitions. Our primary approach to this problem will be to use powder bed binder printing techniques to print reactive structures. The anticipated feedstock will consist of composite particles containing all reactant spe ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
US Flag An Official Website of the United States Government