Award Data

Establish a radiation-aware analysis capability in a commercial EDA design flow that will enable first-pass success in radiation-hardened by design (RHBD) for DoD ASICs in much the same way that existing EDA design suites ensure first pass functionality and performance success of complex ASICs destined for commercial applications. Layout-aware, calibrated single-event radiation models that captur ...

Near-Field Scanning Microwave Microscopy (SMM) is a technique relying on a raster scan of a microwave probe across a sample surface, while measuring its reflected microwave signal. The existing technologies are limited to the surface analysis, and are not compatible with liquid environment. These limitations are addressed by the proposed wideband 3D tomography SMM with sub-surface analysis capabil ...

Achieving strong and durable polymer adhesion to inorganic substrates under various environmental conditions is challenging. The required long-term durability tests are over long time- and length-scales, beyond the capability of current modeling, and extensive experimental testing is needed. Currently, no commercially available method exists for monitoring how a polymer/substrate system evolves du ...

For effective protection against EMP and HPM threats, it is important to understand the physics of the threats, and also to quantify the effects they have on electrical systems. EMP and HPM vulnerability testing requires delivery of high peak power and electric fields to distant targets. The most practical solution to simulate such environments is to develop a modular, optically-isolated MV-antenn ...

The ability to authenticate electronic devices is an important step towards modernizing the hardware/software of our Nations communication systems. Protecting these targeted networks and devices from malicious cyber-based attacks is becoming increasingly important as the technological and cyber capabilities of our adversaries continue to advance. In addition to network security, device authenticat ...

Laboratory investigations have suggested that acoustically or vibrationally inducing motion in buried targets can aid in improving target detectability through a characteristic response related to differential target motion. This gain is realized by adding an additional degree of freedom, modulation due to motion in the GPR return signal, to use as a discriminating feature. The AKELA team is propo ...

Historically, the monitoring and detection of biological threats has been carried out via the deployment of high sensitivity / high complexity monitoring nodes to insure high probability of detection and low false alarm rate. Unfortunately, this detection strategy has inherent limits with respect to coverage and response due to its high deployment/support costs, mandating a new approach to environ ...

Micro-RDC will develop portable radiation effects test structures that scales to new process nodes. These structures will enable the investigation of the effects of radiation on the new technology from the material processing level as well as the circuit level. The production of the chosen structures and the development of software to extract the model parameters will form the framework. A suit ...

A human produces more than 100 Watts of waste heat during normal activity. If a fraction of this heat energy can be harvested it can replace the stored chemical energy in one or more of the batteries typically carried by soldiers in the field. The current generation batteries, such as the BB2590 are bulky and rigid. The PowerFelt material developed by Wake Forest University is ideally suited for h ...

The overall objective of this project (Phase I, II, and III) is to develop, fabricate, and test a novel biofidelic rat surrogate for the validation of primary blast loading conditions for mild traumatic brain injury (mTBI). The CFDRC/NJIT team will use extensive knowledge of blast loading characteristics and TBI studies coupled with past/ongoing efforts designing and testing a rat surrogate. In P ...