You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Multiphase Modeling of Solid Rocket Motor Internal Environment

    SBC: CFD Research Corporation            Topic: T1

    Solid rocket motor (SRM) design requires detailed understanding of the slag accumulation process in order to: predict thrust continuity, optimize propellant conversion efficiency, predict coning effects from sloshing, and to assess potential orbital debris (slag) hazard. Current state-of-the-art models for SRM environment do not have the capability to simulate the accumulation and dynamics of slag ...

    STTR Phase II 2018 National Aeronautics and Space Administration
  2. Transient Acoustic Environment Prediction Tool for Launch Vehicles in Motion During Early Lift-Off

    SBC: CFD Research Corporation            Topic: T1

    Launch vehicles experience extreme acoustic loads dominated by rocket plume interactions with ground structures during liftoff, which can produce damaging vibro-acoustic loads on the vehicle and payloads if not properly understood and mitigated against. Existing capabilities for modeling turbulent plume physics are too dissipative to accurately resolve the acoustic propagation and detailed vehicle ...

    STTR Phase II 2018 National Aeronautics and Space Administration
  3. Efficient Composite Repair Methods for Launch Vehicles

    SBC: Luna Innovations Incorporated            Topic: T12

    Polymer matrix composites are increasingly replacing traditional metallic materials in NASA launch vehicles due to high strength to weight ratio, manipulative properties, and corrosion resistance. However, the inspection and repair methods for these materials are considerably more complicated. For aerospace platform repairs, a composite laminate patch must be manually fabricated on-site and then ...

    STTR Phase II 2018 National Aeronautics and Space Administration
  4. High Performance 3D Photonic Integration for Space Applications

    SBC: Freedom Photonics LLC            Topic: T8

    In this work, Freedom Photonics will team with University of California, Santa Barbara to develop a hybrid integration platform that integrates yielded, best-of-breed active optical components with low-cost, high functionality Silicon Photonics components in a manner that is compatible with foundry fabrication (such as AIM Photonics). This will be performed in a highly manufacturable manner, using ...

    STTR Phase II 2018 National Aeronautics and Space Administration
  5. Demonstration of Autonomous Differential Throttle-based Flight Control for Aircraft with Distributed Electric Propulsion

    SBC: Empirical Systems Aerospace, Inc.            Topic: T15

    A series of RDT&E activities is proposed to create and demonstrate a reconfigurable, autonomous flight controller for the Aircraft for Distributed Electric Propulsion Throttle-based Flight Control (ADEPT-FC) which was designed and built in Phase I, a 33 lb remote controlled aircraft featuring eight overwing electric ducted fans (EDFs) distributed spanwise along the wing’s trailing edge. The prop ...

    STTR Phase II 2018 National Aeronautics and Space Administration
  6. Optical Intersatellite Communications for CubeSat Swarms

    SBC: CROSS TRAC ENGINEERING, INC.            Topic: T11

    .The growing interest in CubeSat swarm and constellation systems by NASA, the Department of Defense and commercial ventures has created a need for self-managed inter-satellite networks capable of handling large amount of data while simultaneously precisely synchronizing time and measuring the distances between the spacecraft. CrossTrac Engineering, Inc., in cooperation with our partners Professor ...

    STTR Phase II 2018 National Aeronautics and Space Administration
  7. Through Wall Wireless Intelligent Sensor and Health Monitoring (TWall-ISHM) System

    SBC: AMERICAN GNC CORPORATION            Topic: T13

    To support development at NASA’s Stennis Space Center (SSC) testing facilities and infrastructure for the monitoring of remote or inaccessible measurement locations, American GNC Corporation (AGNC) and Rensselaer Polytechnic Institute (RPI) have developed the Through Wall Wireless Intelligent Sensor and Health Monitoring (TWall-ISHM) System. This technology allows deploying flexible instrumentat ...

    STTR Phase II 2018 National Aeronautics and Space Administration
  8. Development of an Optic Fiber Based Hybrid Spectroscope

    SBC: LASER AND PLASMA TECHNOLOGIES LLC            Topic: T8

    NASA has supported several instrument development efforts for exploration of Mars other extraterrestrial bodies.This exemplifies the importance of new instrument development efforts for successful advancement of NASA missions.With this in mind Laser&Plasma Technologies successfully demonstrated feasibility of integrating LIBS&Raman instruments into Optical Based Hybrid Spectroscope that meets NASA ...

    STTR Phase II 2018 National Aeronautics and Space Administration
  9. Prediction of Plume Induced Rock Fracture for Landers

    SBC: CFD Research Corporation            Topic: T9

    The landing surface damage and liberation of debris particles caused by rocket plume impingement flow during spacecraft propulsive landing on unprepared surfaces of Moon, Mars, and other celestial bodies poses a high risk for robotic and human exploration activities. Simply determining whether the plume induced loads exceed the bedrock bearing capacity threshold is not sufficient. An integrated m ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  10. A Scalable Gas-Particle Flow Simulation Tool for Lander Plume-Surface Interaction and Debris Prediction

    SBC: CFD Research Corporation            Topic: T9

    Spacecraft propulsive landings on unprepared regolith present in extra-terrestrial environments pose a high risk for space exploration missions. Plume/regolith interaction results in (1) the liberation of dust and debris particles that may collide with the landing vehicle and (2) craters whose shape itself can influence vehicle dynamics. To investigate such gas-granular interactions for large-scal ...

    STTR Phase I 2018 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government