Award Data

Additive manufacturing (AM) has rapidly evolved into a valuable technique for making parts which, at times, cannot be fabricated through conventional machining methods.One challenge in the area of AM is the lack of real-time feedback on the fabrication process and the quality of the part being made.This is especially critical given the relatively long periods of time that complex parts can require ...

For effective protection against radiated threats, it is important to understand not only the physics of the threats, but also to quantify the effects they have on mission-critical electrical systems. Radiated vulnerability and susceptibility testing requires delivery of high peak power and peak electric fields to distant targets. The most practical solution to simulate such environments on large ...

Improving capabilities of telemetry systems for next generation e.g. (MOKV) missile defense launch vehicles, kill vehicles, and test/target vehicles subsystems can transform operational testing of such systems and has the potential to increase capabilities of systems that rely on radio communications. As these systems, and their test scenarios become get more complex they will require unprecedente ...

The goal of this workis to establish a radiation-aware capability in a commercial EDA design flow that will enable first-pass success in radiation resiliency for DoD ASIC designs in much the same way that existing EDA design suites ensure first pass functionality and performance success of complex ASICs destined for commercial applications.Such an integrated capability does not presently exist.The ...

FreEnt Technologies, Inc., A2Z Innovations, Inc., and the University of Alabama Aerospace Research Center (UAH/ARC) have teamed together to design, develop, and perform ground-based-demonstrations of a High-Speed Simultaneous Multiple Object Detection (HS-SMOD) System for MDA. The HS­SMOD system uses a simple but innovative technique of a passive fiber-optic grid and high-speed COTS opto-electr ...

Fine powder thermal battery cathode materials can exhibit challenging flow properties which makes processing with automated presses difficult.Granulating these powders can substantially improve flow properties and reduce the tendency for powder segregation during handling and pressing operations.Additionally, the properties of MgO that lead to good performance in thermal battery separators are not ...

This project will develop a statistical-relational framework and enabling technologies for context-aware object classification and selection. The proposed framework is capable of reasoning about the scene as a whole while incorporating the entire corpus of available information including features and classification labels from heterogeneous sensors and properties of other objects in the scene. The ...

The experimental validation of the DoDs weapon systems is at the cornerstone of national security considerations. The structural requirements for the targets utilized impose a severe cost and lead time burden due to the limitations imposed by the traditional manufacturing processes currently used. Novel manufacturing methods for metal alloys have been established in the past years, but they have y ...

The Department of Defense uses large-scale high-resolution federated simulations to propagate rocket vehicle trajectories. Runge-Kutta methods have served as a de-facto standard while conducting such simulations. However, there are several challenges while using Runge-Kutta methods for this task. Firstly, there should be exact time-step matching between federates, otherwise the states have to be i ...

West Coast Solutions (WCS), in collaboration with the Georgia Institute of Technology and Creare LLC, proposes an adaptation of our SmallSat Stirling Cryocooler (SSC) technology in response to STTR Topic MDA17-T003: High-Efficiency, Low-Volume, Space-Qualified Cryogenic-Coolers. In Phase 1 we will scale up a design currently in development for NASA to meet the Missile Defense Agency (MDA) topic re ...