Award Data

For effective protection against radiated threats, it is important to understand not only the physics of the threats, but also to quantify the effects they have on mission-critical electrical systems. Radiated vulnerability and susceptibility testing requires delivery of high peak power and peak electric fields to distant targets. The most practical solution to simulate such environments on large ...

Polymer matrix composites are increasingly replacing traditional metallic materials in NASA launch vehicles due to high strength to weight ratio, manipulative properties, and corrosion resistance. However, the inspection and repair methods for these materials are considerably more complicated. For aerospace platform repairs, a composite laminate patch must be manually fabricated on-site and then ...

Solid rocket motor (SRM) design requires detailed understanding of the slag accumulation process in order to: predict thrust continuity, optimize propellant conversion efficiency, predict coning effects from sloshing, and to assess potential orbital debris (slag) hazard. Current state-of-the-art models for SRM environment do not have the capability to simulate the accumulation and dynamics of slag ...

Launch vehicles experience extreme acoustic loads dominated by rocket plume interactions with ground structures during liftoff, which can produce damaging vibro-acoustic loads on the vehicle and payloads if not properly understood and mitigated against. Existing capabilities for modeling turbulent plume physics are too dissipative to accurately resolve the acoustic propagation and detailed vehicle ...

.The growing interest in CubeSat swarm and constellation systems by NASA, the Department of Defense and commercial ventures has created a need for self-managed inter-satellite networks capable of handling large amount of data while simultaneously precisely synchronizing time and measuring the distances between the spacecraft. CrossTrac Engineering, Inc., in cooperation with our partners Professor ...

A series of RDT&E activities is proposed to create and demonstrate a reconfigurable, autonomous flight controller for the Aircraft for Distributed Electric Propulsion Throttle-based Flight Control (ADEPT-FC) which was designed and built in Phase I, a 33 lb remote controlled aircraft featuring eight overwing electric ducted fans (EDFs) distributed spanwise along the wing’s trailing edge. The prop ...

In this work, Freedom Photonics will team with University of California, Santa Barbara to develop a hybrid integration platform that integrates yielded, best-of-breed active optical components with low-cost, high functionality Silicon Photonics components in a manner that is compatible with foundry fabrication (such as AIM Photonics). This will be performed in a highly manufacturable manner, using ...

To support development at NASA’s Stennis Space Center (SSC) testing facilities and infrastructure for the monitoring of remote or inaccessible measurement locations, American GNC Corporation (AGNC) and Rensselaer Polytechnic Institute (RPI) have developed the Through Wall Wireless Intelligent Sensor and Health Monitoring (TWall-ISHM) System. This technology allows deploying flexible instrumentat ...

NASA has supported several instrument development efforts for exploration of Mars other extraterrestrial bodies.This exemplifies the importance of new instrument development efforts for successful advancement of NASA missions.With this in mind Laser&Plasma Technologies successfully demonstrated feasibility of integrating LIBS&Raman instruments into Optical Based Hybrid Spectroscope that meets NASA ...

GTL proposes to further the development of its SNS technology towards adoption into aerospace structures. The SNS technology is an enabler technology for the expanded use of structural health monitoring systems. It allows the large data architectures needed for these types of systems to be implemented with minimal mass and impact to structural performance. GTL will accomplish this by automating th ...