You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Prediction of Strutural Response and Fluid-Induced Vibration in Turbomachinery

    SBC: CFD Research Corporation            Topic: T102

    Advanced turbomachinery components play a critical role in launch vehicle and spacecraft liquid rocket propulsion systems. To achieve desired efficiencies, extremely tight tolerances are often imposed between inducer blades and shrouds or other system components which sets up strong interactions that influence both the aerodynamics and the structural performance of blades and vanes. These transien ...

    STTR Phase I 2016 National Aeronautics and Space Administration
  2. Unified In-Space Propulsion Framework for Prediction of Plume-Induced Spacecraft Environments

    SBC: CFD Research Corporation            Topic: T102

    Chemical contamination of spacecraft components as well as thermal and force loading from firing liquid propellant thrusters are critical concerns for in-space propulsion applications. Gas molecular contamination and liquid droplet deposition due to incomplete combustion threaten to damage surface materials, sensitive instruments and optical sensors, and poses major risks for mission success. Liqu ...

    STTR Phase I 2016 National Aeronautics and Space Administration
  3. Development of an Advanced Diamond TEC Cathode

    SBC: IOP Technologies LLC            Topic: T603

    NASA recognizes the importance of conservation, smart utilization and reuse of resources for their deep space missions to address the need for regeneration of air, water and waste with highly reliable systems to reduce mission payload. Additionally, energy for life support and other systems needs to be obtained from renewable energy sources or waste streams. In order to address NASA's requirements ...

    STTR Phase I 2016 National Aeronautics and Space Administration
  4. Sustainable Water Purification

    SBC: Streamline Automation, LLC            Topic: T603

    Newly developed phase-engineered and low dimensional materials have opened the door to the design of materials structures that exhibit extremely efficient ionic transport. Recently, a new type of electro-filtration system designed to convert thermal power into purified water from salt water (or other ionic pollutants) has been demonstrated in the lab. The system is based on a bi-phasic nanoplate ...

    STTR Phase I 2016 National Aeronautics and Space Administration
  5. An Additive Manufacturing Technique for the Production of Electronic Circuits

    SBC: MORNINGBIRD MEDIA CORPORATION            Topic: T1204

    The proposed 9-month research project aims for the development of additive manufacturing techniques for the creation of electronic devices. It will develop an innovative additive manufacturing technique that combines the ink-based printing with laser melting technology to directly print a three-dimensional (3D) system with built-in electrical properties and functioning as an electronic device. Th ...

    STTR Phase I 2016 National Aeronautics and Space Administration
  6. Improved Forecasting of Solar Particle Events and their Effects on Space Electronics

    SBC: CFD Research Corporation            Topic: T602

    High-energy space radiation from Galactic Cosmic Rays and Solar Particle Events (SPEs) pose significant risks to equipment and astronaut health in NASA missions. Energetic particles from SPEs associated with flares and coronal mass ejections (CMEs) may adversely affect not only beyond-Low-Earth-Orbit missions, but also aircraft avionics, communications, and airline crew/passenger health. It is cru ...

    STTR Phase II 2016 National Aeronautics and Space Administration
  7. Innovative Mitigation of Radiation Effects in Advanced Technology Nodes

    SBC: Reliable MicroSystems, LLC            Topic: DTRA16A003

    Establish a radiation-aware analysis capability in a commercial EDA design flow that will enable first-pass success in radiation-hardened by design (RHBD) for DoD ASICs in much the same way that existing EDA design suites ensure first pass functionality and performance success of complex ASICs destined for commercial applications. Layout-aware, calibrated single-event radiation models that captur ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  8. Impact of Hypersonic Flight Environment on Electro-Optic/Infrared (EO/IR) Sensors

    SBC: Analysis and Applications Associates, Inc.            Topic: AF15AT40

    EO/IR sensors can provide high spatial resolution images using multiple frequency bands ranging from the visible to mid-wave IR. EO/IR sensors have been very successful for terrain imaging from subsonic aircraft and from satellites. Imaging using these platforms has been studied extensively. EO/IR sensors can provide high spatial resolution images using multiple frequency bands ranging from the v ...

    STTR Phase II 2016 Department of DefenseAir Force
  9. Open Standard for Display Agnostic 3D Streaming (DA3DS)

    SBC: Third Dimension Technologies LLC            Topic: AF16AT07

    The Air Force has identified a need for the creation of a common streaming model for 3D data that is agnostic to the display technology. To address this need, Third Dimension Technologies (TDT) and Oak Ridge National Laboratory (ORNL) propose to form a c...

    STTR Phase I 2016 Department of DefenseAir Force
  10. CyberSTEPS- Cyber Skills Training with Electronic Performance Support

    SBC: Tier 1 Performance Solutions, LLC            Topic: AF16AT08

    There are many challenges in creating Air Force systems that are resilient against cyber threats. The cyber environment and its threats are highly dynamic, requiring practices and training to be dynamic as well. Cyber threats must be considered during th...

    STTR Phase I 2016 Department of DefenseAir Force
US Flag An Official Website of the United States Government