You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Innovative Aerodynamic Modeling for Aeroservoelastic Analysis and Design

    SBC: M4 ENGINEERING, INC.            Topic: T401

    We propose the development of a novel aerodynamic modeling approach making use of fully unstructured grids for unsteady panel aerodynamic models for aeroelastic and aeroservoelastic analysis. The unsteady aerodynamic code will be integrated with an existing suite of aeroelastic and aeroservoelastic analysis tools making it possible to perform aeroelastic and aeroservoelastic analysis of complex v ...

    STTR Phase II 2016 National Aeronautics and Space Administration
  2. Multifunctional Environmental Digital Scanning Electron Microprobe (MEDSEM)

    SBC: Chromologic LLC            Topic: T801

    Chromologic (CL) and the California Institute of Technology (Caltech) propose to continue the Phase II STTR development and demonstration of a Multifunctional Environmental Digital Scanning Electron Microprobe (MEDSEM) instrument that transmits high energy beams of electrons sequentially using a two-dimensional array of multiple, miniaturized electron probes into a planetary atmosphere and strike ...

    STTR Phase II 2016 National Aeronautics and Space Administration
  3. High Performance Hybrid Upper Stage for NanoLaunch Vehicles

    SBC: Parabilis Space Technologies, Inc.            Topic: T101

    Parabilis Space Technologies, Inc (Parabilis), in collaboration with Utah State University (USU), proposes further development of a low-cost, high-performance launch vehicle upper stage that uses a high density, storable oxidizer and a polymer fuel grain as propellants in response to solicitation T1.01, Affordable Nano/Micro Launch Propulsion Stages. This effort will build upon the successful opti ...

    STTR Phase II 2016 National Aeronautics and Space Administration
  4. A Coupled System for Predicting SPE Fluxes

    SBC: PREDICTIVE SCIENCE INCORPORATED            Topic: T602

    Solar Particle Events (SPEs) represent a major hazard for extravehicular maneuvers by astronauts in Earth orbit, and for eventual manned interplanetary space travel. They can also harm aircraft avionics, communication and navigation. We propose to develop a system to aid forecasters in the prediction of such events, and in the identification/lengthening of "all clear" time periods when there is ...

    STTR Phase II 2016 National Aeronautics and Space Administration
  5. Advanced Gas Sensing Technology for Space Suits

    SBC: Intelligent Optical Systems, Inc.            Topic: T601

    The gas sensor in the PLSS of the ISS EMU will meet its projected life in 2020, and NASA is planning to replace it. At present, only high TRL devices based on infrared absorption are candidate replacements, because of their proven long-term stability, despite their size and power consumption and failures in the presence of liquid water. No current compact sensor has the tolerance for liquid water ...

    STTR Phase II 2016 National Aeronautics and Space Administration
  6. Improved Forecasting of Solar Particle Events and their Effects on Space Electronics

    SBC: CFD Research Corporation            Topic: T602

    High-energy space radiation from Galactic Cosmic Rays and Solar Particle Events (SPEs) pose significant risks to equipment and astronaut health in NASA missions. Energetic particles from SPEs associated with flares and coronal mass ejections (CMEs) may adversely affect not only beyond-Low-Earth-Orbit missions, but also aircraft avionics, communications, and airline crew/passenger health. It is cru ...

    STTR Phase II 2016 National Aeronautics and Space Administration
  7. Integrated Monitoring AWAReness Environment (IM-AWARE)

    SBC: AMERICAN GNC CORPORATION            Topic: T1301

    American GNC Corporation (AGNC) and Louisiana Tech University (LaTECH) are proposing a significant breakthrough technology, the Integrated Monitoring AWAReness Environment (IM-AWARE) consisting of an Enterprise Infrastructure with closely coupled smart sensor networks and Enhanced IT Security to enable: (i) real time monitoring of the distribution systems health; (ii) supporting maintenance operat ...

    STTR Phase II 2016 National Aeronautics and Space Administration
  8. Development of powder bed printing (3DP) for rapid and flexible fabrication of energetic material payloads and munitions

    SBC: MAKEL ENGINEERING, INC.            Topic: DTRA16A001

    This program will demonstrate how additive manufacturing technologies can be used with reactive and high energy materials to create rapid and flexible fabrication of payload and munitions. Our primary approach to this problem will be to use powder bed binder printing techniques to print reactive structures. The anticipated feedstock will consist of composite particles containing all reactant spe ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  9. Fully Metallic Self-Fragmenting Structural Reactive Materials Using Composites and Alloys Comprised of Aluminum, Lithium, and Magnesium

    SBC: Adranos Energetics LLC            Topic: DTRA16A002

    While aluminum casing materials provide some enhanced performance and thermal loading to explosive ordinance, their overall effectiveness is highly limited by incomplete combustion and long residence times. In order to reduce these problems, the casing material must be designed to facilitate rapid fragmentation through either specialized casing geometries or greatly refined initial particle sizes. ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  10. Innovative Mitigation of Radiation Effects in Advanced Technology Nodes

    SBC: Reliable MicroSystems, LLC            Topic: DTRA16A003

    Establish a radiation-aware analysis capability in a commercial EDA design flow that will enable first-pass success in radiation-hardened by design (RHBD) for DoD ASICs in much the same way that existing EDA design suites ensure first pass functionality and performance success of complex ASICs destined for commercial applications. Layout-aware, calibrated single-event radiation models that captur ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
US Flag An Official Website of the United States Government