You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Urbanscape: Single Shot Multi-Task 3D Reconstruction
SBC: DZYNE TECHNOLOGIES, LLC Topic: DTRA18B001Hazard assessment tools that model the transport and dispersion of Chemical, Biological, Radiological, Nuclear and Explosive (CBRNE) materials through urban areas are only as good as the 3D models that inform the physics model. Maintaining accurate, up-to-date 3D models of urban areas is challenging. Even in the commercial world, urban construction and demolition may result in the models created a ...
STTR Phase II 2020 Department of DefenseDefense Threat Reduction Agency -
Hardened, Optically-Based Temperature Characterization of Detonation Environments
SBC: SA PHOTONICS, LLC Topic: DTRA19B001Improving the effectiveness of counter-WMD operations requires improved understanding of weapon-target interaction. Specifically, time-resolved measurements of temperature and composition are required to allow temporal evolution of a detonation fireball. To address this need, SA Photonics will develop MONITOR, a laser-based temperature diagnostic that will enable wide dynamic range temperature mea ...
STTR Phase I 2020 Department of DefenseDefense Threat Reduction Agency -
Improved Identification of the function of Novel and Partially Occluded Laboratory Equipment.
SBC: NOVATEUR RESEARCH SOLUTIONS LLC Topic: DTRA19B002This STTR Phase 1 project proposes development of a statistical relational learning framework for identification of the function of laboratory equipment from imagery. The proposed framework uses semantic reasoning to incorporate evidence from multiple classifiers and feature extractors, domain knowledge, and scene context for scene understanding and labeling. The Phase I effort will focus on imple ...
STTR Phase I 2020 Department of DefenseDefense Threat Reduction Agency -
Compact Laser Drivers for Photoconductive Semicond
SBC: SCIENTIFIC APPLICATIONS & RESEARCH ASSOCIATES, INC. Topic: DTRA16A004For effective protection against radiated threats, it is important to understand not only the physics of the threats, but also to quantify the effects they have on mission-critical electrical systems. Radiated vulnerability and susceptibility testing requires delivery of high peak power and peak electric fields to distant targets. The most practical solution to simulate such environments on large ...
STTR Phase II 2018 Department of DefenseDefense Threat Reduction Agency -
Hierarchical, Layout-Aware, Radiation Effects Tools Vertically Integrated into an EDA Design Flow for Rad-Hard by Design
SBC: RELIABLE MICROSYSTEMS LLC Topic: DTRA16A003The goal of this workis to establish a radiation-aware capability in a commercial EDA design flow that will enable first-pass success in radiation resiliency for DoD ASIC designs in much the same way that existing EDA design suites ensure first pass functionality and performance success of complex ASICs destined for commercial applications.Such an integrated capability does not presently exist.The ...
STTR Phase II 2018 Department of DefenseDefense Threat Reduction Agency -
Development of powder bed printing (3DP) for rapid and flexible fabrication of energetic material payloads and munitions
SBC: MAKEL ENGINEERING, INC. Topic: DTRA16A001This program will demonstrate how additive manufacturing technologies can be used with reactive and high energy materials to create rapid and flexible fabrication of payload and munitions. Our primary approach to this problem will be to use powder bed binder printing techniques to print reactive structures. The anticipated feedstock will consist of composite particles containing all reactant spe ...
STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency -
Rapid Development of Weapon Payloads via Additive Manufacturing
SBC: MATSYS INCORPORATED Topic: DTRA16A001MATSYS proposes to adapt emerging additive manufacturing techniques (so-called 3-D Printing) for use with reactive structural materials and demonstrate this capability to rapidly fabricate reactive case. Our concept incorporates two major manufacturing steps: 3D printing of green compacts from pure Al or Al-based reactive powder blend; and Microwave (MW) sintering of green compacts into net-shaped ...
STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency -
Self-fragmenting Structural Reactive Materials (SF-SRM) for High Combustion Efficiency
SBC: MATSYS INCORPORATED Topic: DTRA16A002MATSYS proposes to develop, test and evaluate a scalable metal-based reactive structural material that will self-fragment to micron or sub-micron scale fuel particles when subjected to explosive shock loading, resulting in significantly enhanced metal combustion efficiency. Use of reactive material casings offers the potential for several-fold increases in blast and overpressure by generating rapi ...
STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency -
Innovative Mitigation of Radiation Effects in Advanced Technology Nodes
SBC: RELIABLE MICROSYSTEMS LLC Topic: DTRA16A003Establish a radiation-aware analysis capability in a commercial EDA design flow that will enable first-pass success in radiation-hardened by design (RHBD) for DoD ASICs in much the same way that existing EDA design suites ensure first pass functionality and performance success of complex ASICs destined for commercial applications. Layout-aware, calibrated single-event radiation models that captur ...
STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency -
Modular Pulse Charger and Laser Triggering System for Large-Scale EMP and HPM Applications
SBC: SCIENTIFIC APPLICATIONS & RESEARCH ASSOCIATES, INC. Topic: DTRA16A004For effective protection against EMP and HPM threats, it is important to understand the physics of the threats, and also to quantify the effects they have on electrical systems. EMP and HPM vulnerability testing requires delivery of high peak power and electric fields to distant targets. The most practical solution to simulate such environments is to develop a modular, optically-isolated MV-antenn ...
STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency