You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Low-Cost Biological Solution for Reducing Carbon Pollution in Chemical Manufacturing

    SBC: INDUSTRIAL MICROBES, INC.            Topic: 14NCER1A

    Industrial Microbes is developing a green fermentation platform to replace carbon-emitting petrochemical production with newer methods that build chemicals out of methane and carbon dioxide.Chemical production is a major source of carbon pollution, responsible for 18% of direct industrialemissions. Our innovation is an engineered microbe that can consume carbon dioxide and methane and produce a ch ...

    SBIR Phase II 2016 Environmental Protection Agency
  2. Cost-effective Molecularly Imprinted Polymer Based Monitoring Technologies to Improve the Performance and Reliability of Small Drinking Water Systems

    SBC: SPORIAN MICROSYSTEMS INC            Topic: 14NCER4B

    Small drinking water systems consistently provide safe, reliable drinking water to their customers; however challenges of such systems include; lack of financial resources, aging infrastructure, lack of scale, and technical/logistical challenges associated with regulation compliance. The deployment ofnew cost-effective monitoring technologies hold opportunities to substantially advance infrastruct ...

    SBIR Phase II 2016 Environmental Protection Agency
  3. Isocyanate-Free Polyurethane Coating

    SBC: TDA Research, Inc.            Topic: 14NCER3B

    Polyurethanes are now made by reacting two components, one of which has toxic isocyanate groups. Isocyanates are especially hazardous to workers that spray-apply polyurethane paints. Researchers have developed less hazardous ways to make polyurethane, but they have poor performance, cure too slowly or are too expensive. In this project, TDA Research, Inc. (TDA) will develop new non-isocyanate two- ...

    SBIR Phase II 2016 Environmental Protection Agency
  4. Biofueled Thermoelectric Cookstove

    SBC: HI-Z TECHNOLOGY, INC.            Topic: 15NCER02

    Over 50 million Indian households cook on a bio-mass fire and have unreliable or no electricity but are anxious to purchase an affordable power stove which will provide on-demand power and lighting to their homes. Annually, projected sales of the power stove could save sixteen million trees, reduce cooking fire particulates by 90%, reduce the two million premature deaths caused from indoor air pol ...

    SBIR Phase I 2016 Environmental Protection Agency
  5. High-Efficiency Nutrient Removal and Recovery for Achieving Low Regulatory Limits

    SBC: MICROVI BIOTECH, INC.            Topic: 15NCER05

    Discharge of nutrients (e.g. phosphorus and ammonia) to surface waters can cause eutrophication and the formation of toxic algal blooms, threatening human health and the environment. However, current phosphorus treatment technologies such as chemical precipitation and conventional biological systems can be costly and ineffective to reliably achieve impending effluent regulatory limits of

    SBIR Phase I 2016 Environmental Protection Agency
  6. Development of powder bed printing (3DP) for rapid and flexible fabrication of energetic material payloads and munitions

    SBC: MAKEL ENGINEERING, INC.            Topic: DTRA16A001

    This program will demonstrate how additive manufacturing technologies can be used with reactive and high energy materials to create rapid and flexible fabrication of payload and munitions. Our primary approach to this problem will be to use powder bed binder printing techniques to print reactive structures. The anticipated feedstock will consist of composite particles containing all reactant spe ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  7. Innovative Mitigation of Radiation Effects in Advanced Technology Nodes

    SBC: Reliable MicroSystems, LLC            Topic: DTRA16A003

    Establish a radiation-aware analysis capability in a commercial EDA design flow that will enable first-pass success in radiation-hardened by design (RHBD) for DoD ASICs in much the same way that existing EDA design suites ensure first pass functionality and performance success of complex ASICs destined for commercial applications. Layout-aware, calibrated single-event radiation models that captur ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  8. Portable and Automated Radiation Effects Test Structures for Advanced Technology Nodes

    SBC: MICROELECTRONICS RESEARCH DEVELOPMENT CORPORATION            Topic: DTRA16A003

    Micro-RDC will develop portable radiation effects test structures that scales to new process nodes. These structures will enable the investigation of the effects of radiation on the new technology from the material processing level as well as the circuit level. The production of the chosen structures and the development of software to extract the model parameters will form the framework. A suit ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  9. Modular Pulse Charger and Laser Triggering System for Large-Scale EMP and HPM Applications

    SBC: SCIENTIFIC APPLICATIONS & RESEARCH ASSOCIATES, INC.            Topic: DTRA16A004

    For effective protection against EMP and HPM threats, it is important to understand the physics of the threats, and also to quantify the effects they have on electrical systems. EMP and HPM vulnerability testing requires delivery of high peak power and electric fields to distant targets. The most practical solution to simulate such environments is to develop a modular, optically-isolated MV-antenn ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  10. Instrumentation for Characterization of Fireballs, Hot Gases, & Aerosols from Defeat of Targets Containing Biological and Chemical Agents

    SBC: ARTIUM TECHNOLOGIES, INC.            Topic: DTRA152004

    Mitigation of threats posed by transportation and storage of hazardous chemicals or defeat of targets containing biological and chemical agents requires basic investigations to characterize aerosol formation and dispersion. Advanced laser-based instrumentation are proposed that will be used to characterize the aerosol and gas phase dispersion of chemicals during an accidental or explosive release. ...

    SBIR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
US Flag An Official Website of the United States Government