You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY22 is not expected to be complete until September, 2023.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Light-Weight Solar Cells with High Specific Power and Conversion Efficiency

    SBC: AGILTRON, INC.            Topic: N14AT003

    Agiltron in collaboration with National Renewable Energy Laboratory (NREL) will develop a new class of high-efficiency and lightweight broadband inverted metamorphic multi-junction (IMM) solar cells for the uninterrupted flight missions of unmanned aerial vehicles (UAVs). The approach is closely coupled with Agiltrons extensive experience in high-transmittance broadband and wide-angle anti-reflect ...

    STTR Phase II 2016 Department of DefenseNavy
  2. Novel, Low-Cost Phased arrays Manufactured by 3D Printing (1000-325)

    SBC: SI2 TECHNOLOGIES, INC.            Topic: N14AT021

    SI2 Technologies, Inc. (SI2) proposes to accelerate development of printed, high-efficiency phased arrays operating at Navy-relevant frequencies. The proposed development effort will include optimization of the array printing techniques from Phase I to meet the Navys phased array performance goals. The printed arrays will incorporate both printed radiating elements and an innovative printed packag ...

    STTR Phase II 2016 Department of DefenseNavy
  3. Perovskite Solar Cells

    SBC: Radiation Monitoring Devices, Inc.            Topic: N16AT006

    The goal of the proposed research is to develop light-weight, flexible, high efficiency solar cells made from perovskite halide light-harvesting materials for use on unmanned aircraft systems (UAS), for use in conjunction with an energy storage system. Solar cells have historically been heavy, costly, and inflexible. In this research, low-cost manufacturing methods will be used to make high effici ...

    STTR Phase I 2016 Department of DefenseNavy
  4. System to Evaluate and Assess Holistic Aircrew Workload (SEAHAWK)

    SBC: Charles River Analytics, Inc.            Topic: N16AT002

    The Navy is continually developing new technologies to improve warfighting effectiveness. These technologies risk overloading Aircrews physical and cognitive capacities, thereby degrading performance. To mitigate that risk, the Navy needs a system to assess Aircrews physical and cognitive workloads unobtrusively and objectively. Such a system must (1) perform real-time data collection in a robust ...

    STTR Phase I 2016 Department of DefenseNavy
  5. TOME: Tools for Objective Measurement and Evaluation

    SBC: APTIMA INC            Topic: N16AT002

    The introduction of new systems and technologies is critical for maintaining superiority, yet this brings with it uncertainty regarding the impact on users, teams, and organizations. Rigorous test and evaluation (T&E) practices are therefore essential prior to acquiring and instituting new technologies, particularly to assess the workload imposed on end users. Traditionally, workload assessment ha ...

    STTR Phase I 2016 Department of DefenseNavy
  6. High Hesitivity Magnetic Materials for Magnetic Toroid and Flat Dipole Antennas

    SBC: Winchester Technologies, LLC            Topic: N16AT001

    Novel approaches are needed to improve the performance and reduce the size, number and signature of antennas with significantly enhanced efficiency in HF-UHF. It has been shown recently hesitivity, which is able to characterize the performance of the material and categorize the radiation efficiency of magnetodielectric wire antennas; the higher the hesitivity, the higher the attainable antenna eff ...

    STTR Phase I 2016 Department of DefenseNavy
  7. Air Cycle Machine Low Friction, Medium Temperature, Foil Bearing Coating

    SBC: ACREE TECHNOLOGIES INCORPORATED            Topic: N16AT005

    The purpose of this project is to demonstrate the feasibility of using an innovative, durable, low friction, and non-toxic solid lubricant coating for foil air bearings for air cycle machines (ACM). Acrees coating provides superior wear characteristics at all temperatures and provides a substantial improvement over polyimide type coatings that are currently used on ACMs. The coating consists of tw ...

    STTR Phase I 2016 Department of DefenseNavy
  8. Air Cycle Machine Low Friction, Medium Temperature, Foil Bearing Coating

    SBC: IBC Materials & Technologies, LLC            Topic: N16AT005

    In this proposed SBIR program, IBC Materials & Technologies, in conjunction with our industry partner Mechanical Solutions, Inc. (MSI) and Texas A&M University, will leverage our knowledge and experience in the domain of industrial metallic coatings to develop a metallurgical coating solution for the Air Foil Bearing. IBC has deep expertise in a variety of industrial coating processes including mu ...

    STTR Phase I 2016 Department of DefenseNavy
  9. Novel Separator Materials for Achieving High Energy/Power Density, Safe, Long-Lasting Lithium-ion Batteries for Navy Aircraft Applications.

    SBC: OCEANIT LABORATORIES INC            Topic: N16AT008

    Oceanit proposes to develop and demonstrate novel, tailored, designer separator materials with optimized properties to maximize lithium-ion cell/battery performance, life, safety and reliability.

    STTR Phase I 2016 Department of DefenseNavy
  10. Additive Manufacturing for Microwave Vacuum Electron Device Cost Reduction

    SBC: Radiabeam Technologies, LLC            Topic: N16AT010

    The Department of the Navy has a need for the development of an additive manufacturing (AM) process for key vacuum electronic device components to meet on-demand, flexible, and affordable manufacturing requirements. The developed manufacturing method has a potential to reduce cost of vacuum electronics by as much as 70% as well as simplify and hence expedite production process of these devices by ...

    STTR Phase I 2016 Department of DefenseNavy
US Flag An Official Website of the United States Government