Award Data

Leveraging their prior experience working with automated fiber placement (AFP) of thin-ply composite materials, NextGen Materials & Processing LLC and the University of Massachusetts Lowell will utilize a Design of Experiments approach, combined with analytical modeling, to identify the critical material, slitting, spooling, and AFP parameters that influence the repeatable, high quality laydown of ...

All rocket missions benefit from having lower structural mass and higher specific impulse, both of which contribute to larger payload fractions and therefore lower mission cost. High temperature materials such as ceramic matrix composites (CMCs) are an avenue to lower engine mass because of the low density and high specific strength of the material. They also have a high maximum temperature and so ...

DISCUS is a generic Guidance, Navigation and Control (GNC) system for swarms of SmallSats. It integrates communications and relative localization with innovative Density Control Algorithms (DCA) enabling robust operation in a variety of uncertain environments. As such, it presents a key enabling technology for future Deep Space missions including space apertures at Lagrangian points, and orbiting ...

PCKA is partnering with researchers at Purdue University to develop an Autonomous Power Controller (APC) for mission-critical microgrids to supply electric power in a highly autonomous and secure manner to accomplish mission objectives. The APC consists of a centralized controller connected to an array of local component controllers. The centralized controller will be capable of optimal generation ...

NASA's goals to explore deep space through manned missions requires development of self-sustaining life support systems. A diverse team from Freight Farms, Inc. have partnered with Clemson University to merge knowledge of sustainable farming with engineering expertise to create off-grid infrastructure for self-sustaining plant life that will assist NASA with their goals. Freight Farms' current pro ...

Fractionated spacecraft architectures to distribute mission performance from a single, monolithic satellite across large number of smaller spacecraft, for missions like close proximity inspection, sparse aperture arrays, robotic assembly, servicing, refueling, etc., can enable higher mission capability, reconfigurability and robustness. This distributed satellite architecture, with large numbers o ...

NASA recognizes the importance of conservation, smart utilization and reuse of resources for their deep space missions to address the need for regeneration of air, water and waste with highly reliable systems to reduce mission payload. Additionally, energy for life support and other systems needs to be obtained from renewable energy sources or waste streams. In order to address NASA's requirements ...

Busek, in partnership with Arizona State University (ASU), proposes to develop a robotic resource prospecting mission to a near-Earth asteroid using a 6U CubeSat, nicknamed "AstroCube". This ambitious mission is enabled by Busek's iodine-fueled BIT-3 RF ion propulsion system that can deliver ~1mN of thrust and ~2200sec of total Isp with 65W nominal input power. With 1.6kg of solid iodine propell ...

PC Krause and Associates is partnering with Purdue University, EleQuant, and GridQuant to create a hybrid modeling capability. The combination of PCKA?s extensive dynamic modeling experience, Purdue?s work in electromechanical systems analysis, and GridQuant and Elequant?s development of the HELM algorithm uniquely positions the team to create this technology. HELM is a novel algorithm that solves ...

Active dosimeters for astronauts and space weather monitors are critical tools for mitigating radiation induced health issues or system failure on capital equipment. Commercial spaceflight, deep space flight, and satellites require smarter, smaller, and lower power dosimeters. There are a number of instruments with flight heritage, yet as identified in NASA's roadmaps, this technology does not l ...