You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY22 is not expected to be complete until September, 2023.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Automatic Calibration of High-Performance Metrological Instrumentation

    SBC: Abeam Technologies Inc.            Topic: 04c

    Metrology is a multi-billion dollar industry that is an indispensable part of science and manufacturing. A variety of techniques including interferometric microscopes, scanning electron microscopes (SEM), X-ray, and atomic force microscopes (AFM) are used in X- ray mirror manufacturing. The performance of any tool directly depends on the ability to characterize and tune it. Modulation Transfer Fun ...

    STTR Phase I 2014 Department of Energy
  2. Development of low cost method for fabrication of metal neutron guides

    SBC: Dawn Research Inc            Topic: 06b

    Neutron scattering is one of the most useful methods of studying the structure and dynamics of matter. Therefore, a number of new large neutron facilities have recently being constructed, upgraded or planned around the world. Examples include the new, 1.4 billion-dollars Spallation Neutron Source (SNS) at DOEs Oak Ridge National Laboratory and upgrades of ORNLs High- Flux Isotope Reactor and N ...

    STTR Phase I 2014 Department of Energy
  3. Computational design of a Novel dehydratase for renewable fuels and chemicals

    SBC: PROTABIT, LLC            Topic: 12b

    The reaction catalyzed by dihydroxyacid dehydratase is a key bottleneck in the biosynthesis of isobutanol from glucose, caused in part by extremely inefficient maturation of the catalytically essential Fe-S cofactor (~1%) when the dehydratase is recombinantly expressed. One strategy to relieve this bottleneck is to replace this complicated, energetically expensive enzyme with a simpler one that us ...

    STTR Phase I 2014 Department of Energy
  4. Microfluidic automation platform for synthetic biology applications in the development and production of next-generation biofuels

    SBC: Hj Science & Technology, Inc.            Topic: 21j

    Generating and screening multiple combinations of genes, enzymes, and other biological parts has become vital to next generation biofuel development and production. This currently requires large personnel costs and sizeable capital investments in robotics equipment. Commercial adoption of the synthetic biology technology will require high throughput capabilities, low cost, product reliability, and ...

    STTR Phase I 2014 Department of Energy
  5. A hybrid HTS/LTS Superconductor Design for High-Field Accelerator Magnets

    SBC: PARTICLE BEAM LASERS, INC            Topic: 33b

    The next generation of particle accelerators, including a proposed LHC upgrade, will move to higher energy and luminosity in order to continue the exploration beyond the limits of the present LHC. This will require new technologyin particular, higher field (20T or more) dipoles as well as better interaction-region quadrupoles to focus the beams at the collision points. This proposal seeks to add ...

    STTR Phase I 2014 Department of Energy
  6. Thermo-Mechanically Stable Tungsten Powders as Solid Catchers for the Fast Release of Stopped Rare Isotopes

    SBC: Innosense Llc            Topic: 38g

    The Department of Energy (DOE) seeks useful methods of generating intense beams of reaccelerated rare isotopes for the next-generation Facility for Rare Isotope Beams (FRIB), which is currently under construction at Michigan State University. Stopping high-energy, heavy- ion reaction products in fast-release solid catchers is an important method to be developed for realizing intense beams of short ...

    STTR Phase I 2014 Department of Energy
  7. High power diode-pumped laser amplifier for laser-driven ultrafast table-top soft x-ray laser sources

    SBC: XUV LASERS INC            Topic: 08a

    The problem/situation that is being addressed is the development and improvement of compact laser- driven x-ray sources for ultrafast characterization of interest to the DoE. While much progress has been made in the development of table-top x-ray sources, with high harmonic sources and atomic soft x-ray lasers presently allowing for a large number of experiments to be conducted in small laborator ...

    STTR Phase I 2014 Department of Energy
  8. Comprehensive, Time-Resolved Molecular Speciation of Gaseous and Particulate Organic Constituents in the Atmosphere

    SBC: AEROSOL DYNAMICS INC            Topic: 17d

    Development of new instrumentation for measuring volatile organic compounds (VOC) and intermediate volatility organic compounds (IVOC) that may react to form secondary organic aerosols (SOA) has been identified as a vital need by DOE. Revealing the detailed mechanisms leading to SOA formation from gas phase precursors is best achieved by measuring both phases with sufficient temporal resolution to ...

    STTR Phase I 2014 Department of Energy
  9. Enhanced Capacitive Deionization using Carbon Electrodes Conformally Coated with Metal Oxides by Atomic Layer Deposition

    SBC: ALD NANOSOLUTIONS, INC            Topic: 02c

    Access to clean water is a global problem that has led to the development of multiple desalination techniques. All techniques strive to reduce the cost of desalinating water to provide clean water in a cost effective manner. Capacitive deionization (CDI) is a new technique that can reduce the cost of ownership by ~85% compared with reverse osmosis for brackish water. This project will further im ...

    STTR Phase I 2014 Department of Energy
  10. A Diagnostic for Simultaneous Liquid and Vapor Distributions in Sprays using Filtered Rayleigh and Mie Scattering

    SBC: Metrolaser, Inc.            Topic: 07d

    The understanding of how fuel evaporates and mixes when injected into an engine cylinder is of key importance for the design of cleaner, more efficient vehicles. To meet the Department of Energy & apos;s goals of improving fuel efficiency in gasoline engines by 25 percent and diesel engines by 40 percent, advanced tools for research on fuel injection dynamics are needed. Existing techniques for in ...

    STTR Phase I 2014 Department of Energy
US Flag An Official Website of the United States Government