You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Lightweight, Stable Optical Bench with Integrated Vibration Attenuation
SBC: SAN DIEGO COMPOSITES, INC. Topic: MDA13T007The goal of this program is to design a lightweight optical bench capable of remaining stable under temperature and moisture changes, while isolating the precision optical array from vibrations such as engine noise and air turbulence. By integrating a customizable periodic stack in the bench, vibrations are attenuated more effectively than commercially available mounts. Additionally, the periodic ...
STTR Phase II 2016 Department of DefenseMissile Defense Agency -
Embedded Sensors for Flight Test (Every Aircraft a Test Aircraft)
SBC: NEXTGEN AERONAUTICS, INC. Topic: AF14AT01Increasing system capabilities in terms of weapon systems, ISR payloads, GNC, etc., enabled by smaller and more capable electronics systems have led to a trend for overall size reduction in military aircraft. This has resulted in a reduction in the avail...
STTR Phase II 2016 Department of DefenseAir Force -
Microelectronics Component Adhesive Selection and Design Rules for Failure Avoidance
SBC: CFD RESEARCH CORPORATION Topic: MDA14T002Thermally induced fatigue and residual stress introduced during fabrication are sources of failure in microelectronics, which raises reliability concerns for MDA and its system integrators. CFDRC has teamed with experts in the reliability of microelectronics packaging to develop a physics based modeling and testing protocol to correlate material properties and thermal loading conditions to stress ...
STTR Phase II 2016 Department of DefenseMissile Defense Agency -
Bonded Joint Analysis Method
SBC: M4 ENGINEERING, INC. Topic: N12AT004During Phase I and Phase II, M4 Engineering, Inc. and Sandia National Laboratories have created a unique bonded joint analysis methodology and associated software. During Phase II.5, the developed techniques will be further enhanced and a fully functional commercial analysis code (SIMULIA/Abaqus) plug-in will be created. The software plug-in will make the advanced technology accessible to all leve ...
STTR Phase II 2016 Department of DefenseNavy -
High Fidelity Rotorcraft Towing Modeling and Simulation with Towed Magnetic Anomaly Detection System
SBC: ADVANCED ROTORCRAFT TECHNOLOGY, INC. Topic: N15AT009Towing of a Magnetic Anomaly Detection (MAD) system is an important aspect of rotorcraftmaritime operation. The oscillatory rotorcraft combined with the long and flexible towingcable, the low mass ratio of the towed body to the towing aircraft, and the rotor wake effecton the towed body presents a challenge for integration of a modern MAD system withrotorcraft platform. The research objective is t ...
STTR Phase II 2016 Department of DefenseNavy -
Retrofittable and Transparent Super-Insulator for Single-Pane Windows
SBC: NANOSD, INC. Topic: DEFOA0001429NanoSD, Inc. with its partners will develop a transparent, nanostructured thermally insulating film that can be applied to existing single-pane windows to reduce heat loss. To produce the nanostructured film, the team will create hollow ceramic or polymer nanobubbles and consolidate them into a dense lattice structure using heat and compression. Because it is mostly air, the resulting nanobubble s ...
STTR Phase II 2016 Department of EnergyARPA-E -
Data Driven Intent Recognition Framework
SBC: OTHER LAB, INC. Topic: NSF13599A critical aspect of exoskeleton control that has to date introduced a performance limitation is the ability of the exoskeleton to recognize the intent of the operator so it can apply assistance to their desired motion. This intent recognition effort is typically solved using ad-hoc methods where subject matter experts make design decisions and tune transitions to identify intended maneuvers as re ...
STTR Phase II 2016 Department of DefenseSpecial Operations Command -
Decision Making under Uncertainty
SBC: GCAS, Inc. Topic: MDA13T001Our proposed second order uncertainty (SOU) product is a decision making software solution that addresses the problem of providing accurate and precisely defined decision courses of action (COAs) of complex, time-constrained problems in a fraction of the time required by alternative methods striving to achieve the same level of precision. Complex decision situations can deal with large volume of ...
STTR Phase II 2016 Department of DefenseMissile Defense Agency -
Enhancement of Ballistic Missile Defense System Level Simulation Operations Through Multi-core Processing
SBC: ISSAC Corp Topic: MDA13T003The ISSAC Team propose a novel method to encapsulate legacy models and simulations that allows these components to take advantage of modern, multi-core, multi-processor hardware suites. Encapsulating these legacy codes provides 3 primary advantages to deal with complex systems and systems of systems (Air Force, Navy, Department of Homeland Security (DHS), Federal Emergency Management Agency (FEMA) ...
STTR Phase II 2016 Department of DefenseMissile Defense Agency -
High Gain, High Power PCSS with Integrated Monolithic Optical Trigger
SBC: Eureka Aerospace Topic: A14AT004This proposal addresses the problem of PCSS/laser trigger integration using a single monolithic laser diode array, thus simplifying the entire optical delivery network necessary for efficient operation of PCSSs. The proposal constitutes a logical continuation of Phase I effort where the main focus was on the detailed design of the PCSS/laser diode array (LDA) integrated architecture. In Phase II ...
STTR Phase II 2016 Department of DefenseArmy