Award Data

ABSTRACT: The proliferation of autonomous- and human-machine systems necessitates the creation of new tools for system design and evaluation. Key among these are simulation testbeds that support interactions between multiple warfighters and systems, and methods for creating and integrating intelligent agent models into simulation environments. We see a significant opportunity to advance the state ...

ABSTRACT: This Phase I STTR project aims to develop a silicon friendly carbon nanotube field effect transistor platform technology with reduced contact resistance and wafer-scale aligned carbon nanotubes towards development of an L-band amplifier. Key innovation nuggets that will be developed include: 1) a wafer scalable process to deposit dense aligned arrays of high purity semiconducting and len ...

ABSTRACT: In this project, we propose to develop the baseline process to form low source-drain contact resistance to the CNTs. This includes finding the right metal stack and annealing recipe to form good ohmic contact to the CNTs. The goal is to achieve a resistance less than 25 k at per nanotube contact. To reach such goal, we will leverage the interfacial dipole alignment of conjugated polyelec ...

ABSTRACT: Carbon nanotubes (CNTs) have great potential for high performance RF applications. Theoretical study has shown that the electrical current in a CFET is intrinsically linear. Today, linearity is the underlying limitation in increasing the data transport densities of wireless networks. The complex modulation protocols used to achieve higher data rates requires linear amplifiers. Increasing ...

ABSTRACT: Speech recognition technology is in wide use today and has been successfully integrated in a number of applications. Most of these applications require a microphone located near the talker. However, when a distant microphone is used where the speaker is at some distance from the microphone as in a hands-free communication, or in a meeting room, there is a major problem with the captured ...

ABSTRACT: The sensor system requirements for image based navigation that uses passive millimeter wave imaging radiometry will be established based on existing RelNav and AbsNav algorithms that were demonstrated to work in multi-modal imagery. Existing flight data will be used to simulate the PMMW imagery for these tests. A preliminary design of such a PMMW system will be created. Under Phase-II th ...

ABSTRACT: The objective of this proposal is to demonstrate the feasibility of a flexible, low-cost, integrated and sensitive broad spectrum optical property characterization system. We propose a hyperspectral imager designed for operation in the 300nm 2000nm spectral region with state-of-the-art spectral and spatial resolution through the use of a high density array of high finesse (F = 1000) tuna ...

ABSTRACT: An unseeded measurement technique is proposed for simultaneous spatially-resolved measurements of density, temperature, and velocity in hypersonic wind tunnel flows with the future potential for time-resolved measurement capability. A variant of filtered Rayleigh scattering (FRS) will be developed that takes advantage of unique monotonic relationships between molecular vapor cell filter ...

ABSTRACT: Exquadrum, Inc. proposes to develop an innovative multi-mode power generation system for hypersonic flight vehicles. This system produces the required power output that the flight vehicle demands, independent of the flight characteristics at the time. However, this system will work in conjunction with the propulsion system to augment the power generation capabilities. This is accomplishe ...

ABSTRACT: Designing an efficient and effective film cooling system to protect critical components of modern rocket engines requires a significant number of challenges to be addressed. Complicating the already difficult hydrodynamic challenges, thermal cracking of hydrocarbon fuels is always accompanied by coke formation. The coke deposits on the combustor and nozzle walls reduces heat fluxes and c ...