Award Data

ABSTRACT: The objective of this proposal is to demonstrate the feasibility of a flexible, low-cost, integrated and sensitive broad spectrum optical property characterization system. We propose a hyperspectral imager designed for operation in the 300nm 2000nm spectral region with state-of-the-art spectral and spatial resolution through the use of a high density array of high finesse (F = 1000) tuna ...

ABSTRACT: To maintain superiority in the battle domains of space, ground, air and sea, it is natural that the U.S. move toward incorporating autonomous capabilities to enhance/replace the traditional role of humans. Continued advances in processing capability and techniques to employ decision logic and adaptive learning strategies will soon make this vision reality. To deploy any such capability o ...

ABSTRACT: This Phase I STTR project aims to develop a silicon friendly carbon nanotube field effect transistor platform technology with reduced contact resistance and wafer-scale aligned carbon nanotubes towards development of an L-band amplifier. Key innovation nuggets that will be developed include: 1) a wafer scalable process to deposit dense aligned arrays of high purity semiconducting and len ...

ABSTRACT: In this project, we propose to develop the baseline process to form low source-drain contact resistance to the CNTs. This includes finding the right metal stack and annealing recipe to form good ohmic contact to the CNTs. The goal is to achieve a resistance less than 25 k at per nanotube contact. To reach such goal, we will leverage the interfacial dipole alignment of conjugated polyelec ...

ABSTRACT: Carbon nanotubes (CNTs) have great potential for high performance RF applications. Theoretical study has shown that the electrical current in a CFET is intrinsically linear. Today, linearity is the underlying limitation in increasing the data transport densities of wireless networks. The complex modulation protocols used to achieve higher data rates requires linear amplifiers. Increasing ...

ABSTRACT: Speech recognition technology is in wide use today and has been successfully integrated in a number of applications. Most of these applications require a microphone located near the talker. However, when a distant microphone is used where the speaker is at some distance from the microphone as in a hands-free communication, or in a meeting room, there is a major problem with the captured ...

ABSTRACT: The hydrocarbon-fueled scramjet is capable of providing hypersonic air-breathing propulsion for high-speed applications. The effective operation of high-speed air-breathing engines (ram- and scram-jets) over a wide range of flow parameters (velocity and altitude) is one of the most technically difficult challenges in the design of hypersonic vehicles. The most promising approach to overc ...

ABSTRACT: The need for improved performance of liquid rocket engines requires efficient wall cooling technologies to mitigate high heat fluxes from hot combustion gases to the engine wall in the thrust chamber. High heat fluxes to the chamber liners can be overcome by fuel film cooling (FFC) of the inside chamber using the liquid propellant. Moreover, the thermal cracking of the fuel creates coke ...

ABSTRACT: Designing an efficient and effective film cooling system to protect critical components of modern rocket engines requires a significant number of challenges to be addressed. Complicating the already difficult hydrodynamic challenges, thermal cracking of hydrocarbon fuels is always accompanied by coke formation. The coke deposits on the combustor and nozzle walls reduces heat fluxes and c ...

ABSTRACT: Enig Associates, Inc., a small business providing advanced modeling and simulation capabilities to the DoD and DoE, is proposing an innovative and novel electrical approach, using explosive-driven flux compression generators (FCG) to convert explosive chemical energy to electromagnetic energy with very high current output and superb energy conversion efficiency and then Joule heat light ...