You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Proactive Contextual Decision Support for Decision Making Under Uncertainty

    SBC: PACIFIC SCIENCE & ENGINEERING GROUP, INC.            Topic: N13AT020

    Current decision tools often omit important situational context. Unfortunately, this can lead to dangerous and costly errors, as context drives decision making. For example, in operational navigation planning tasks, decisions must be made that rely on multiple information sources of different fidelities and uncertainties. Furthermore, after obtaining additional information the necessity for replan ...

    STTR Phase II 2015 Department of DefenseNavy
  2. Nonlinear-DSP-Enabled RF-Photonic Link

    SBC: RAM PHOTONICS LLC            Topic: N14AT023

    Digital equalizers have been the major enablers in RF communications in terms of managing component imperfections and channel impairments. Specifically, the ever increasing processing power of the dedicating computing processors has availed a steady increase in the ability of complex communication systems to deal with impairments as well as allowing higher capacities in the information transfer.On ...

    STTR Phase II 2016 Department of DefenseNavy
  3. In Situ Inspection of Additive Manufactured Metallic Parts Using Laser Ultrasonics

    SBC: INTELLIGENT OPTICAL SYSTEMS, INC.            Topic: N15AT008

    Additive manufacturing (AM) is a very promising technique for rapid, low-cost production of aircraft parts directly from a CAD file. AM is especially appealing for complex parts that would be costly or impossible to fabricate by machining or casting. At the current time there are no reliable, cost-effective techniques to qualify the finished parts. Several government studies have noted this gap an ...

    STTR Phase II 2016 Department of DefenseNavy
  4. High Fidelity Rotorcraft Towing Modeling and Simulation with Towed Magnetic Anomaly Detection System

    SBC: ADVANCED ROTORCRAFT TECHNOLOGY, INC.            Topic: N15AT009

    Towing of a Magnetic Anomaly Detection (MAD) system is an important aspect of rotorcraftmaritime operation. The oscillatory rotorcraft combined with the long and flexible towingcable, the low mass ratio of the towed body to the towing aircraft, and the rotor wake effecton the towed body presents a challenge for integration of a modern MAD system withrotorcraft platform. The research objective is t ...

    STTR Phase II 2016 Department of DefenseNavy
  5. Demonstration of a Local Carrier-Based Precision Approach and Landing System (LC-PALS)

    SBC: TOYON RESEARCH CORPORATION            Topic: N14AT009

    Toyon Research Corporation, together with the University of California, Santa Barbara (UCSB) propose to demonstrate a GPS-denied Local Carrier-based Precision Approach and Landing System (LC-PALS) that enables 3-D position, navigation and time (PNT) for platforms within range of an aircraft carrier equipped with one or more ADEPT-compliant beacons. Unlike the Global Positioning System (GPS), which ...

    STTR Phase II 2015 Department of DefenseNavy
  6. Bonded Joint Analysis Method

    SBC: M4 ENGINEERING, INC.            Topic: N12AT004

    During Phase I and Phase II, M4 Engineering, Inc. and Sandia National Laboratories have created a unique bonded joint analysis methodology and associated software. During Phase II.5, the developed techniques will be further enhanced and a fully functional commercial analysis code (SIMULIA/Abaqus) plug-in will be created. The software plug-in will make the advanced technology accessible to all leve ...

    STTR Phase II 2016 Department of DefenseNavy
  7. Development of a Micro-glider for Oceanographic Air-Sea Interaction Sampling

    SBC: MRV SYSTEMS LLC            Topic: N14AT020

    This proposal is a collaborative effort between MRV Systems and the Woods Hole Oceanographic Institution. The goal is to develop a new, small, inexpensive autonomous vehicle to investigate mixed layer dynamics and turbulent mixing. The preliminary Phase I design, a Diagonally Operating Platform (DOP), is a profiling float with moveable fins. DOP will turn toward an intended direction within a few ...

    STTR Phase II 2016 Department of DefenseNavy
  8. Compact robust testbed for cold-atom clock and sensor applications

    SBC: COLDQUANTA, INC.            Topic: N13AT018

    Our goal in this Phase II effort is to construct and test a compact, robust testbed for generating laser-cooled strontium atoms on a mobile platform. The focus of the Phase I effort was designing and fabricating an ovenized strontium source that also serves as a 2D+ MOT cell. In Phase II, we will integrate the strontium source into an all-glass-and-silicon vacuum system maintained by a miniature i ...

    STTR Phase II 2015 Department of DefenseNavy
  9. Interlaminar Mode I and Mode II Fracture Toughnesses in Ceramic Matrix Composites (CMCs)

    SBC: ALPHASTAR TECHNOLOGY SOLUTIONS LLC            Topic: N13AT008

    The Alpha STAR Corporation and the University of Akron STTR Phase II proposal will establish ASTM standards test methods to determine relevant ceramics matrix composites (CMC) delamination crack growth resistance (CGR) material properties (Mode I & Mode II)under service load temperature conditions. Phase Ii will expand on Phase I results, conclusions & recommendations. Emphasis will be on testing ...

    STTR Phase II 2015 Department of DefenseNavy
  10. Fast and Flexible Differential Equation Model Fitting with Application to Pharmacometrics

    SBC: Metrum Research Group LLC            Topic: N16AT016

    Differential equations are widely used to analyze and simulate the dynamics of complex systems in the physical, biological and social sciences. Inferences with such models are challenging due to both statistical and computational complexity. Stan is a widely used, open-source, probabilistic programming language and Bayesian inference engine. We propose to extend Stan by incorporating solvers for o ...

    STTR Phase I 2016 Department of DefenseNavy
US Flag An Official Website of the United States Government