You are here
The Award database is continually updated throughout the year. As a result, data for FY22 is not expected to be complete until September, 2023.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
Retrofittable and Transparent Super-Insulator for Single-Pane WindowsSBC: NANOSD, INC. Topic: DEFOA0001429
NanoSD, Inc. with its partners will develop a transparent, nanostructured thermally insulating film that can be applied to existing single-pane windows to reduce heat loss. To produce the nanostructured film, the team will create hollow ceramic or polymer nanobubbles and consolidate them into a dense lattice structure using heat and compression. Because it is mostly air, the resulting nanobubble s ...STTR Phase II 2016 Department of EnergyARPA-E
Novel Screen Approach to Inactivate Whole Viral Vaccines by Supralethal IrradiationSBC: AGAVE BIOSYSTEMS INC. Topic: DTRA14B002
Future vaccine development should focus on rapid upscale production, long-term and broad protection, and sufficient global distribution to prevent and reduce the impact of many infectious diseases and potential epidemics. Agave BioSystems proposes to develop a novel whole-microorganism vaccine inactivation strategy involving high-throughput screen of extensive radio-protectant matrices and radiati ...STTR Phase I 2015 Department of DefenseDefense Threat Reduction Agency
Development of powder bed printing (3DP) for rapid and flexible fabrication of energetic material payloads and munitionsSBC: MAKEL ENGINEERING INC Topic: DTRA16A001
This program will demonstrate how additive manufacturing technologies can be used with reactive and high energy materials to create rapid and flexible fabrication of payload and munitions. Our primary approach to this problem will be to use powder bed binder printing techniques to print reactive structures. The anticipated feedstock will consist of composite particles containing all reactant spe ...STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
A Novel, Microscale, Distributable Sensor Technology for Ionizing RadiationSBC: CFD RESEARCH CORPORATION Topic: DTRA14B004
Terrorist use of radioactive nuclear materials via nuclear and/or radiological dispersion devices (dirty bombs) is a serious threat. Therefore, it is critical to detect the proliferation of nuclear material. Critical challenges facing this objective include: (a) high sensitivity detection of signature emissions (e.g., gamma rays) from common radioactive isotopes behind shielding, and (b) cost-effe ...STTR Phase I 2015 Department of DefenseDefense Threat Reduction Agency
Portable System with Li Foil MWPC Neutron DetectorsSBC: RADIATION DETECTION TECHNOLOGIES INC Topic: DTRA14B005
At the completion of the research and development effort a Li foil multi-wire proportional counter (MWPC) neutron detector with more than 625 cm^2 of active area will be included in a portable radiation detection system. The system is expected to have an intrinsic thermal neutron detection efficiency of 55% or greater and gamma-ray rejection ratio (GRR) of 1.0x10^-8 or better. A gamma-ray spectrom ...STTR Phase I 2015 Department of DefenseDefense Threat Reduction Agency
Fully Metallic Self-Fragmenting Structural Reactive Materials Using Composites and Alloys Comprised of Aluminum, Lithium, and MagnesiumSBC: Adranos Energetics LLC Topic: DTRA16A002
While aluminum casing materials provide some enhanced performance and thermal loading to explosive ordinance, their overall effectiveness is highly limited by incomplete combustion and long residence times. In order to reduce these problems, the casing material must be designed to facilitate rapid fragmentation through either specialized casing geometries or greatly refined initial particle sizes. ...STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
Modular Pulse Charger and Laser Triggering System for Large-Scale EMP and HPM ApplicationsSBC: SCIENTIFIC APPLICATIONS & RESEARCH ASSOCIATES, INC. Topic: DTRA16A004
For effective protection against EMP and HPM threats, it is important to understand the physics of the threats, and also to quantify the effects they have on electrical systems. EMP and HPM vulnerability testing requires delivery of high peak power and electric fields to distant targets. The most practical solution to simulate such environments is to develop a modular, optically-isolated MV-antenn ...STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency