You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Acoustically/Vibrationally Enhanced High Frequency Electromagnetic Detector for Buried Landmines
SBC: AKELA INC Topic: A16AT004Laboratory investigations have suggested that acoustically or vibrationally inducing motion in buried targets can aid in improving target detectability through a characteristic response related to differential target motion. This gain is realized by adding an additional degree of freedom, modulation due to motion in the GPR return signal, to use as a discriminating feature. The AKELA team is propo ...
STTR Phase I 2016 Department of DefenseArmy -
An Ultra-Compact Low-Power THz Radio SoC with On-Chip Antenna and Energy Harvesting
SBC: Digital Analog Integration, Inc. Topic: A15AT005There is an unmet demand for ultra-low-power, ultra-compact and low-cost radios to address emerging sensing and communication needs for military and commercial applications such as IoT/IoE. To overcome the limitations in existing bulky and power hungry radios, we propose a disruptive solution by integration of a nano-scaled THz transceiver, on-chip antenna, and energy harvesting circuits in a form ...
STTR Phase II 2016 Department of DefenseArmy -
Development of powder bed printing (3DP) for rapid and flexible fabrication of energetic material payloads and munitions
SBC: MAKEL ENGINEERING, INC. Topic: DTRA16A001This program will demonstrate how additive manufacturing technologies can be used with reactive and high energy materials to create rapid and flexible fabrication of payload and munitions. Our primary approach to this problem will be to use powder bed binder printing techniques to print reactive structures. The anticipated feedstock will consist of composite particles containing all reactant spe ...
STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency -
Electronically Tunable High-Power Infrared Lasers for Standoff Detection Applications
SBC: Pranalytica, Inc. Topic: A14AT015In response to the Army STTR Topic A14A-T015 solicitation for tunable high-power LWIR lasers for standoff detection applications, Pranalytica proposed to develop a compact, rugged and highly reliable wavelength tunable quantum cascade laser (QCL) module delivering over 5W of peak power and over 0.5W of average power in the spectral region spanning from 7 to 11m. The proposed approach is based on a ...
STTR Phase II 2016 Department of DefenseArmy -
Energy Harvesting Fabric
SBC: STREAMLINE AUTOMATION LLC Topic: A15AT017A human produces more than 100 Watts of waste heat during normal activity. If a fraction of this heat energy can be harvested it can replace the stored chemical energy in one or more of the batteries typically carried by soldiers in the field. The current generation batteries, such as the BB2590 are bulky and rigid. The PowerFelt material developed by Wake Forest University is ideally suited for h ...
STTR Phase I 2016 Department of DefenseArmy -
High Gain, High Power PCSS with Integrated Monolithic Optical Trigger
SBC: Eureka Aerospace Topic: A14AT004This proposal addresses the problem of PCSS/laser trigger integration using a single monolithic laser diode array, thus simplifying the entire optical delivery network necessary for efficient operation of PCSSs. The proposal constitutes a logical continuation of Phase I effort where the main focus was on the detailed design of the PCSS/laser diode array (LDA) integrated architecture. In Phase II ...
STTR Phase II 2016 Department of DefenseArmy -
High Gain, High Power PCSS with Integrated Monolithic Optical Trigger
SBC: NESS ENGINEERING, INC. Topic: A14AT004The objective of this Phase II proposal is to continue the development of a Photoconductive Semiconductor Switch (PCSS) with an integrated optical trigger that can switch at least 30 kV, 1 kA, 20 ns pulses with jitter 108 shots. Ness Engineering, Inc. (NEI) and Texas Tech University (TTU) propose to utilize wide bandgap materials to demonstrate lock-on switching and allow much less optical trigger ...
STTR Phase II 2016 Department of DefenseArmy -
Hybrid Battery/Supercapacitor Energy Storage Device
SBC: ADA TECHNOLOGIES, INC. Topic: A15AT010ADA Technologies, Inc. (ADA) and Dr. Massoud Pedram at the University of Southern California (USC) have successfully completed a Phase I STTR effort for the development of a lithium ion (Li-ion)/ supercapacitor hybrid electrical energy storage system (HEESS) to afford pulse power characteristics (projected ~10 kW/kg) in a high energy system (100-150 Wh/kg). The system is enabled via a constant cur ...
STTR Phase II 2016 Department of DefenseArmy -
Identification of Multiple Illicit Drugs Using a Handheld Detector Based on Chemiresitive Sensor Arrays
SBC: Next Dimension Technologies, Inc. Topic: A16AT008Next Dimension Technologies and Caltech will jointly develop a handheld detector to meet the Armys need for a field-based illicit drug identification system. The project will focus on the design and development of a dual-mode chemiresistive sensor array capable of detecting key drugs of interest, including synthetic cannabinoids and opioids. Novel sensing materials, with enhanced chemical sensit ...
STTR Phase I 2016 Department of DefenseArmy -
Miniature Mass Spectrometer for Peptide Sequencing and Mobile Coupling with Separation Techniques
SBC: BAYSPEC, INC. Topic: A16AT012Using advanced ion optics that was developed by Pacific Northwest National Laboratory (PNNL), BaySpec will develop a prototype of portable mass spectrometer (less than 40 lb. and 300W) with continuous atmospheric pressure inlet that is fully capable of uninterrupted on-line sampling from an ambient environment. The continuous nature of the inlet ensures full compatibility with separation technique ...
STTR Phase I 2016 Department of DefenseArmy