You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Nonlinear-DSP-Enabled RF-Photonic Link

    SBC: Ram Photonics LLC            Topic: N14AT023

    Digital equalizers have been the major enablers in RF communications in terms of managing component imperfections and channel impairments. Specifically, the ever increasing processing power of the dedicating computing processors has availed a steady increase in the ability of complex communication systems to deal with impairments as well as allowing higher capacities in the information transfer.On ...

    STTR Phase II 2016 Department of DefenseNavy
  2. In Situ Inspection of Additive Manufactured Metallic Parts Using Laser Ultrasonics

    SBC: Intelligent Optical Systems, Inc.            Topic: N15AT008

    Additive manufacturing (AM) is a very promising technique for rapid, low-cost production of aircraft parts directly from a CAD file. AM is especially appealing for complex parts that would be costly or impossible to fabricate by machining or casting. At the current time there are no reliable, cost-effective techniques to qualify the finished parts. Several government studies have noted this gap an ...

    STTR Phase II 2016 Department of DefenseNavy
  3. High Fidelity Rotorcraft Towing Modeling and Simulation with Towed Magnetic Anomaly Detection System

    SBC: ADVANCED ROTORCRAFT TECHNOLOGY, INC.            Topic: N15AT009

    Towing of a Magnetic Anomaly Detection (MAD) system is an important aspect of rotorcraftmaritime operation. The oscillatory rotorcraft combined with the long and flexible towingcable, the low mass ratio of the towed body to the towing aircraft, and the rotor wake effecton the towed body presents a challenge for integration of a modern MAD system withrotorcraft platform. The research objective is t ...

    STTR Phase II 2016 Department of DefenseNavy
  4. Bonded Joint Analysis Method

    SBC: M4 ENGINEERING, INC.            Topic: N12AT004

    During Phase I and Phase II, M4 Engineering, Inc. and Sandia National Laboratories have created a unique bonded joint analysis methodology and associated software. During Phase II.5, the developed techniques will be further enhanced and a fully functional commercial analysis code (SIMULIA/Abaqus) plug-in will be created. The software plug-in will make the advanced technology accessible to all leve ...

    STTR Phase II 2016 Department of DefenseNavy
  5. Development of a Micro-glider for Oceanographic Air-Sea Interaction Sampling

    SBC: MRV Systems, LLC            Topic: N14AT020

    This proposal is a collaborative effort between MRV Systems and the Woods Hole Oceanographic Institution. The goal is to develop a new, small, inexpensive autonomous vehicle to investigate mixed layer dynamics and turbulent mixing. The preliminary Phase I design, a Diagonally Operating Platform (DOP), is a profiling float with moveable fins. DOP will turn toward an intended direction within a few ...

    STTR Phase II 2016 Department of DefenseNavy
  6. Vertical GaN Substrates

    SBC: Sixpoint Materials, Inc.            Topic: DEFOA0000941

    SixPoint Materials will create low-cost, high-quality vertical gallium nitride (GaN) substrates using a multi-phase production approach that employs both hydride vapor phase epitaxy (HVPE) technology and ammonothermal growth techniques to lower costs and maintain crystal quality. Substrates are thin wafers of semiconducting material needed for power devices. In its two-phase project, SixPoint Mate ...

    STTR Phase II 2014 Department of EnergyARPA-E
  7. Human-Centric Training and Assessment System for Cyber Situational Awareness

    SBC: Scalable Network Technologies, Inc.            Topic: OSD12T08

    The goal of the proposed work is to develop a human-centric training and assessment system for cyber situation awareness. The envisioned system will enable instructors to define training goals, design lesson plans, assign students roles in teams, and observe students performance, record events and interactions for scoring. The instructor/students can place tags (time or event) to roll back or repl ...

    STTR Phase II 2014 Department of DefenseOffice of the Secretary of Defense
  8. First-principles-based framework for discovery and design of sustainable non-rare-earth high-temperature alloy systems

    SBC: CFD Research Corporation            Topic: OSD12T06

    The aim of this STTR program is to develop protocols to discover rare-earth-free/rare-earth-lean magnetic alloys for replacing rare earth (RE) -based alloys for reducing the dependence of supply from China. The development of non-RE high temperature magnetic materials is very challenging. In Phase I, CFDRC in collaboration with its university partner has demonstrated a proof-of-concept computation ...

    STTR Phase II 2014 Department of DefenseOffice of the Secretary of Defense
  9. Novel Approaches to Service Virtualization in Mobile Ad Hoc Networks

    SBC: SUNS-Tech Corp.            Topic: N10AT006

    This project focuses on the design and analysis of a scale-free routing approach for mobile ad hoc networks (MANET) that we call automatic incremental routing (AIR), because routing to any destination is automatic from the routing labels assigned to nodes, and incremental in that each node only needs to know information about its immediate neighborhood and nothing else. The main premise for AIR is ...

    STTR Phase II 2014 Department of DefenseNavy
  10. Comprehensive Bonded Joint Analysis Method

    SBC: M4 ENGINEERING, INC.            Topic: N12AT004

    Using its Phase I program results, M4 Engineering, Inc. and Sandia National Laboratories will continue to create a unique bonded joint analysis methodology and associated software. Surrogate traction-separation models will be created that efficiently capture the behavior that occurs for real bonded joints. Mixed mode loading, including compressive normal tractions and relative displacements will b ...

    STTR Phase II 2014 Department of DefenseNavy
US Flag An Official Website of the United States Government