You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Superconducting Wollaston Prism for Spin Echo Scattering Angle Measurement

    SBC: ADELPHI TECHNOLOGY INC            Topic: 09b

    Neutron Scattering has been an extremely productive materials science probe for over 60 years. It is no exaggeration to say that any technology that uses plastics has benefitted from it in some way from Small Angle Neutron Scattering (SANS). Unfortunately, SANS is limited to studying molecular structures with sizes between 1 to 100 nm and so often misses larger details. Similarly, neutron radiogra ...

    STTR Phase II 2014 Department of Energy
  2. Robust RF Photocathodes

    SBC: Calabazas Creek Research, Inc.            Topic: 33e

    Existing high quantum efficiency (QE) photocathodes experience very short lifetimes, often only a few hours. Because of the fabrication expense for these cathodes, commercial use is impractical for most applications. Photocathodes with long lifetime are needed to make photoguns cost effective for commercial applications. CCR and the University of Maryland are applying controlled porosity reservoir ...

    STTR Phase II 2014 Department of Energy
  3. Nano-Patterned Cathode Surfaces for High Efficiency Photoinjectors

    SBC: Radiabeam Technologies, LLC            Topic: 05a

    Present day photoinjector cathodes have poor lifetime or inadequate quantum efficiency for advanced applications. In addition, the efficiency is constrained by the frequency up-conversion in the drive laser from infrared to ultraviolet photons. Novel nanofabrication techniques allow for the sub-wavelength patterning of hole array surfaces on the cathode. Exploiting the surface plasmon resonance co ...

    STTR Phase II 2014 Department of Energy
  4. Realization of Large Foot-Print Multi-layer- High Temperature Capacitors with Novel Dielectric Materials and Rapid Novel Thermal Spray Deposition Routes

    SBC: DRS Research            Topic: 01a

    This project is about development of novel multilayer dielectric capacitors via thermal spray coating route. Use of this technology will enable mass production of multilayer ceramic capacitors at lower cost.

    STTR Phase II 2014 Department of Energy
  5. Vertical GaN Substrates

    SBC: Sixpoint Materials, Inc.            Topic: DEFOA0000941

    SixPoint Materials will create low-cost, high-quality vertical gallium nitride (GaN) substrates using a multi-phase production approach that employs both hydride vapor phase epitaxy (HVPE) technology and ammonothermal growth techniques to lower costs and maintain crystal quality. Substrates are thin wafers of semiconducting material needed for power devices. In its two-phase project, SixPoint Mate ...

    STTR Phase II 2014 Department of EnergyARPA-E
  6. Automatic Calibration of High-Performance Metrological Instrumentation

    SBC: Abeam Technologies Inc.            Topic: 04c

    In this project, aBeam will further develop and commercialize the metrology application developed by scientists at Lawrence Berkeley National Laboratory and supported by their patent. The product will improve the capabilities of high-performance metrological instrumentation. Our technology is the enabler of well characterized quantitative metrology at the nanoscale that does not exist thus far.

    STTR Phase II 2017 Department of Energy
  7. Transition Metal Blocking Microporous Polymer Separators for Energy-Dense and Long-Lived Li-ion Batteries

    SBC: Sepion Technologies            Topic: 12a

    The advanced energy economy will be a dominant market force in the 21st century, one driven by US demand but asymmetrically low domestic supply without immediate action. This project focuses on the development and US manufacturing of a new battery membrane that enables low-cost and long-lived Li-ion batteries.

    STTR Phase II 2017 Department of Energy
  8. Vertical GaN Substrates

    SBC: Sixpoint Materials, Inc.            Topic: DEFOA0000941

    SixPoint Materials will create low-cost, high-quality vertical gallium nitride (GaN) substrates using a multi-phase production approach that employs both hydride vapor phase epitaxy (HVPE) technology and ammonothermal growth techniques to lower costs and maintain crystal quality. Substrates are thin wafers of semiconducting material needed for power devices. In its two-phase project, SixPoint Mate ...

    STTR Phase II 2017 Department of EnergyARPA-E
  9. Nano-Patterned Cathode Surfaces for High Efficiency Photoinjectors

    SBC: Radiabeam Technologies, LLC            Topic: 05a

    Metal photoinjector cathode development has shown recent promise with nano-patterning technology. However, in order to be competitive with semi-conductor cathodes, a further enhancement in efficiency is needed. TECHNICAL APPROACH Specific nano-patterning of sub-wavelength features to produce antennae provides coupling of incoming laser light with the surface of the metal cathode. Bowtie nano-anten ...

    STTR Phase II 2016 Department of Energy
  10. Single-shot Picosecond Temporal Resolution Transmission Electron Microscopy

    SBC: Radiabeam Technologies, LLC            Topic: 07a

    Transmission electron microscopy (TEM) is one of the primary tools for biological and materials characterization and has many important research applications. There is an overarching need to improve the temporal resolution of TEMs. State-­‐of-­‐the-­‐art single shot TEM only achieve 10 nanoseconds temporal resolution. Technical Approach UCLA and RadiaBeam Tec ...

    STTR Phase II 2016 Department of Energy
US Flag An Official Website of the United States Government