You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Compact Laser Drivers for Photoconductive Semicond

    SBC: Scientific Applications & Research Associates, Inc.            Topic: DTRA16A004

    For effective protection against radiated threats, it is important to understand not only the physics of the threats, but also to quantify the effects they have on mission-critical electrical systems. Radiated vulnerability and susceptibility testing requires delivery of high peak power and peak electric fields to distant targets. The most practical solution to simulate such environments on large ...

    STTR Phase II 2018 Department of DefenseDefense Threat Reduction Agency
  2. Scaleup of a Combined Spray Pyrolysis and Fluidized-bed Reactor Method for the Production of High Performing Layered Nickel- rich Cathode Materials as a Continuous Process

    SBC: HAZEN RESEARCH, INC.            Topic: 14a

    To increase the utilization of electric vehicles, the US Department of Energy is seeking to reduce the cost of electric vehicle batteries to less than $125/kWh by 2022. To achieve this goal, the costs of cathode materials, which account for approximately 30% of the cost of vehicle batteries, must be reduced significantly. To address the challenge of lowering the costs of advanced lithium battery c ...

    STTR Phase II 2018 Department of Energy
  3. Robust Molecular Predictive Methods for Novel Polymer Discovery and Applications

    SBC: Sheeta Global Tech Corp.            Topic: 08b

    This Small Business Technology Transfer (STTR) program aims at development and demonstration of an integrated theoretically/experimentally combinatorial method for the accurate prediction of rheological behaviors of special polymer solutions. In-depth understandings of dynamic responses of the polymer solutions under external shear are essential for development of the “smart” polymer-based add ...

    STTR Phase II 2018 Department of Energy
  4. CORC; Cable Based High Field Hybrid Magnets for Future Colliders

    SBC: ADVANCED CONDUCTOR TECHNOLOGIES LLC            Topic: 26b

    "The next generation of very high field accelerator magnets (20 T or more) are expected to be made with high-temperature superconductors (HTS) along with conventional low-temperature superconductors (LTS) to reduce cost. The operation and protection of these magnets becomes very challenging particularly if the HTS coils are made with the tapes and operate at a much lower current than the LTS coils ...

    STTR Phase II 2018 Department of Energy
  5. Innovative Mitigation of Radiation Effects in Advanced Technology Nodes

    SBC: Microelectronics Research Development Corporation            Topic: DTRA16A003

    Micro-RDC has developed portable radiation effects test structures that scale to new process nodes.These structures will enable the investigation of the effects of radiation on the new technology from the material processing level as well as the circuit level.Fabricating the chosen structures and the refinement of software to extract the model parameters will be completed in this effort.A suite of ...

    STTR Phase II 2018 Department of DefenseDefense Threat Reduction Agency
  6. Demonstration of the technological capability for production of neutron-focusing nickel mirrors

    SBC: ELECTROFORMED NICKEL, INC.            Topic: 15a

    Neutron scattering is one of the most useful methods of studying the structure and dynamics of matter. These methods require large installations at national laboratories, such as Oak Ridge National Laboratory (ORNL), National Institute of Standards and Technology (NIST) and other facilities constructed or planned in the US and around the world. These facilities serve a large and diverse community ...

    STTR Phase II 2018 Department of Energy
  7. Low-Cost Hybrid Plasmonic and Photonic "Campanile" Near-Field Probes by Nanoimprint Lithography

    SBC: Abeam Technologies Inc.            Topic: 07a

    Near-field scanning optical microscopy (NSOM) is a powerful and unique approach to characterize the chemical, physical and potentially biochemical properties of materials with the nanometer scale resolution in real-time. A key element for NSOM systems that combine optical spectroscopy with scanning probe microscopy, is the actual probe itself. While many commercial vendors offer off-the-shelf meta ...

    STTR Phase II 2018 Department of Energy
  8. Development of a superconducting RF flipper

    SBC: ADELPHI TECHNOLOGY INC            Topic: 08a

    A recent report by the Basic Energy Sciences Advisory Committee entitled “Challenges at the Frontiers of Matter and Energy” pointed to the need to better understand hierarchical and heterogeneous materials, often at the mesoscopic scale. Such structures can be studied by x-ray and neutron scattering techniques, but they do not generally yield narrow signals in momentum or energy space. The nat ...

    STTR Phase II 2018 Department of Energy
  9. Single-shot Picosecond Temporal Resolution Transmission Electron Microscopy

    SBC: Radiabeam Technologies, LLC            Topic: 24a

    Transmission electron microscopy (TEM) is one of the primary tools for biological and materials characterization; however, there is an overarching need to push TEM temporal resolution into a ps-range to study physical processes on their fundamental spatial and temporal scales. With state-of-the-art TEM, however, it is not possible to capture a single image with a temporal resolution better than 10 ...

    STTR Phase II 2018 Department of Energy
  10. A Concrete Additive Manufacturing Process for Fixed and Floating Wind Turbine Foundations and Towers

    SBC: JC Solutions            Topic: 14b

    Tall towers and foundations for modern offshore and land-based wind turbines are too large to transport over roads or rail due to their extremely large dimensions. Existing “one-off” on-site construction methods are too expensive, and are too slow for manufacturing foundations and towers in the large numbers needed, especially for offshore components manufactured in ports with limited lay-down ...

    STTR Phase I 2018 Department of Energy
US Flag An Official Website of the United States Government