You are here
The Award database is continually updated throughout the year. As a result, data for FY22 is not expected to be complete until September, 2023.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
Marburg Virus Prophylactic Medical CountermeasureSBC: Flow Pharma, Inc. Topic: CBD18A002
Flow Pharma, Inc. is a biotechnology company in the San Francisco Bay Area developing fully synthetic cytotoxic T lymphocyte (CTL)stimulating peptide vaccines for Marburg virus. The FlowVax vaccine platform allows us to create dry powder formulations of biodegradablemicrospheres and TLR adjuvants incorporating class I and class II T cell epitopes. FlowVax vaccines can be designed for delivery by i ...STTR Phase I 2018 Department of DefenseOffice for Chemical and Biological Defense
Marburg Virus Prophylactic Medical CountermeasureSBC: MAPP BIOPHARMACEUTICAL, INC. Topic: CBD18A002
There are currently no vaccines or therapeutics available for Marburg Virus Disease (MVD). Given the specter of weaponization and the terriblemorbidity and high mortality rate of MVD, this represents a critical threat to the operational readiness of the Warfighter. While traditionalvaccines have proven to be a huge contribution to public health, they do have some limitations especially in the cont ...STTR Phase I 2018 Department of DefenseOffice for Chemical and Biological Defense
Compact Laser Drivers for Photoconductive SemicondSBC: SCIENTIFIC APPLICATIONS & RESEARCH ASSOCIATES, INC. Topic: DTRA16A004
For effective protection against radiated threats, it is important to understand not only the physics of the threats, but also to quantify the effects they have on mission-critical electrical systems. Radiated vulnerability and susceptibility testing requires delivery of high peak power and peak electric fields to distant targets. The most practical solution to simulate such environments on large ...STTR Phase II 2018 Department of DefenseDefense Threat Reduction Agency
Vertical GaN SubstratesSBC: Sixpoint Materials, Inc. Topic: DEFOA0000941
SixPoint Materials will create low-cost, high-quality vertical gallium nitride (GaN) substrates using a multi-phase production approach that employs both hydride vapor phase epitaxy (HVPE) technology and ammonothermal growth techniques to lower costs and maintain crystal quality. Substrates are thin wafers of semiconducting material needed for power devices. In its two-phase project, SixPoint Mate ...STTR Phase II 2017 Department of EnergyARPA-E
Portable System with Li Foil MWPC Neutron DetectorsSBC: RADIATION DETECTION TECHNOLOGIES INC Topic: DTRA14B005
At the completion of the research and development effort a Li-foil multi-wire proportional counter (MWPC) neutron detector with more than 625-cm2 of active area will be included in a portable radiation detection system. The system is expected to outperform the standards set by the ANSI N42.53 standards, and gamma-ray rejection ratio (GRR) of 1.0x10-8 or better. A gamma-ray spectrometer for isotope ...STTR Phase II 2017 Department of DefenseDefense Threat Reduction Agency
Production of Chemical Reagents for Prompt-Agent-Defeat WeaponsSBC: NALAS ENGINEERING SERVICES INC Topic: DTRA14B001
Nalas Engineering and Johns Hopkins University collaborated in a Phase I STTR program to study reactive mixtures of HI3O8 and nanocomposite fuels previously developed by the Weihs Group. These fuel/oxidizer mixtures are uniquely able to simultaneously produce heat and biocidal iodine gas, a combination designed to destroy biological weapons. The team at Nalas focused on evaluating conditions for p ...STTR Phase II 2017 Department of DefenseDefense Threat Reduction Agency
Retrofittable and Transparent Super-Insulator for Single-Pane WindowsSBC: NANOSD, INC. Topic: DEFOA0001429
NanoSD, Inc. with its partners will develop a transparent, nanostructured thermally insulating film that can be applied to existing single-pane windows to reduce heat loss. To produce the nanostructured film, the team will create hollow ceramic or polymer nanobubbles and consolidate them into a dense lattice structure using heat and compression. Because it is mostly air, the resulting nanobubble s ...STTR Phase II 2016 Department of EnergyARPA-E
Development of powder bed printing (3DP) for rapid and flexible fabrication of energetic material payloads and munitionsSBC: MAKEL ENGINEERING INC Topic: DTRA16A001
This program will demonstrate how additive manufacturing technologies can be used with reactive and high energy materials to create rapid and flexible fabrication of payload and munitions. Our primary approach to this problem will be to use powder bed binder printing techniques to print reactive structures. The anticipated feedstock will consist of composite particles containing all reactant spe ...STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
Modular Pulse Charger and Laser Triggering System for Large-Scale EMP and HPM ApplicationsSBC: SCIENTIFIC APPLICATIONS & RESEARCH ASSOCIATES, INC. Topic: DTRA16A004
For effective protection against EMP and HPM threats, it is important to understand the physics of the threats, and also to quantify the effects they have on electrical systems. EMP and HPM vulnerability testing requires delivery of high peak power and electric fields to distant targets. The most practical solution to simulate such environments is to develop a modular, optically-isolated MV-antenn ...STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency