Award Data

Density functional theory is used by many researchers funded by the Department of Energy as a method for predicting the behavior of chemicals and materials used in energy applications. However, results of these calculations are often not standardized and, even when they are, expert-level understand of the methods is needed in order to properly perform a simulation. The energy research community a ...

Density functional theory is used by many researchers funded by the Department of Energy as a method for predicting the behavior of chemicals and materials used in energy applications. However, results of these calculations are often not standardized and, even when they are, expert-level understand of the methods is needed in order to properly perform a simulation. The energy research community a ...

Plasma facing components have significant challenges for fusion reactors and commercial uses of fusion energy, e.g. compact neutron generators. Economical systems have very high power densities with enormous particle flux loadings that exceed capabilities for conventional static materials, e.g. W, Mo, Cu and stainless steels. The proposed solution uses flowing liquid metal layers to transport heat ...

Laser based advanced accelerators can achieve very high accelerating gradients, but their duty cycle is limited by the laser power availability and media recovery time. Inverse Free Electron Laser (IFEL) is a vacuum farfield laser accelerator scheme which does not rely on a medium (plasma) or a structure (metal or electric) and therefore is potentially capable of accelerating charged particles ver ...

A key requirement for microalgae biofuels production is a very low cost harvesting technology. Commercially available solidliquid separation technologies applicable to microalgae, such as chemical coagulation, membrane separations and centrifugation, are too costly for biofuels production or other lowcost microalgae processes, such as wastewater treatment. A low cost harvesting process is bio floc ...

Metal photoinjector cathode development has shown recent promise with nano-patterning technology. However, in order to be competitive with semi-conductor cathodes, a further enhancement in efficiency is needed. TECHNICAL APPROACH Specific nano-patterning of sub-wavelength features to produce antennae provides coupling of incoming laser light with the surface of the metal cathode. Bowtie nano-anten ...

Thomas Jefferson National Accelerator Facility (JLab) uses low efficiency klystrons in the CEBAF machine. In the older portion they operate at 30% efficiency with a tube mean time between failure (MTBF) of five to six years. A highly efficient source (>55-60%) must provide a high degree of backwards compatibility, both in size and voltage requirements, to replace the klystron presently used at JLa ...

Transmission electron microscopy (TEM) is one of the primary tools for biological and materials characterization and has many important research applications. There is an overarching need to improve the temporal resolution of TEMs. State-­‐of-­‐the-­‐art single shot TEM only achieve 10 nanoseconds temporal resolution. Technical Approach UCLA and RadiaBeam Tec ...

Replacement of petroleum based vehicles with fuel cell electric vehicles operating on hydrogen produced from domestically available resources would dramatically decrease emissions of greenhouse gases and other pollutants as well as reduce dependence on oil from politically volatile regions of the world. One major inhibitor to a hydrogen society is the lack of infrastructure, which requires hydroge ...

The Department of Energy needs improved radiation resistant electrical insulation materials for the superconducting magnet coils in fusion reactors. To achieve safe, reliable, economic and environmentally benign fusion energy system, DOE is seeking organic/inorganic insulation-capable materials that are wrappable. These materials under irradiation will enable magnet coils to: (1) operate reliably ...