You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Embedded Sensors for Flight Test (Every Aircraft a Test Aircraft)
SBC: NEXTGEN AERONAUTICS, INC. Topic: AF14AT01Increasing system capabilities in terms of weapon systems, ISR payloads, GNC, etc., enabled by smaller and more capable electronics systems have led to a trend for overall size reduction in military aircraft. This has resulted in a reduction in the avail...
STTR Phase II 2016 Department of DefenseAir Force -
Retrofittable and Transparent Super-Insulator for Single-Pane Windows
SBC: NANOSD, INC. Topic: DEFOA0001429NanoSD, Inc. with its partners will develop a transparent, nanostructured thermally insulating film that can be applied to existing single-pane windows to reduce heat loss. To produce the nanostructured film, the team will create hollow ceramic or polymer nanobubbles and consolidate them into a dense lattice structure using heat and compression. Because it is mostly air, the resulting nanobubble s ...
STTR Phase II 2016 Department of EnergyARPA-E -
Development of powder bed printing (3DP) for rapid and flexible fabrication of energetic material payloads and munitions
SBC: MAKEL ENGINEERING, INC. Topic: DTRA16A001This program will demonstrate how additive manufacturing technologies can be used with reactive and high energy materials to create rapid and flexible fabrication of payload and munitions. Our primary approach to this problem will be to use powder bed binder printing techniques to print reactive structures. The anticipated feedstock will consist of composite particles containing all reactant spe ...
STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency -
Fully Metallic Self-Fragmenting Structural Reactive Materials Using Composites and Alloys Comprised of Aluminum, Lithium, and Magnesium
SBC: Adranos Energetics LLC Topic: DTRA16A002While aluminum casing materials provide some enhanced performance and thermal loading to explosive ordinance, their overall effectiveness is highly limited by incomplete combustion and long residence times. In order to reduce these problems, the casing material must be designed to facilitate rapid fragmentation through either specialized casing geometries or greatly refined initial particle sizes. ...
STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency -
Modular Pulse Charger and Laser Triggering System for Large-Scale EMP and HPM Applications
SBC: SCIENTIFIC APPLICATIONS & RESEARCH ASSOCIATES, INC. Topic: DTRA16A004For effective protection against EMP and HPM threats, it is important to understand the physics of the threats, and also to quantify the effects they have on electrical systems. EMP and HPM vulnerability testing requires delivery of high peak power and electric fields to distant targets. The most practical solution to simulate such environments is to develop a modular, optically-isolated MV-antenn ...
STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency -
Data Driven Intent Recognition Framework
SBC: OTHER LAB, INC. Topic: NSF13599A critical aspect of exoskeleton control that has to date introduced a performance limitation is the ability of the exoskeleton to recognize the intent of the operator so it can apply assistance to their desired motion. This intent recognition effort is typically solved using ad-hoc methods where subject matter experts make design decisions and tune transitions to identify intended maneuvers as re ...
STTR Phase II 2016 Department of DefenseSpecial Operations Command -
Infrared Light Emitting Arrays for Target Image Projection
SBC: ATTOLLO ENGINEERING, LLC Topic: AF16AT22Current scene projection hardware is challenged to simultaneously meet the requirements for high peak temperature (> 2000K), high resolution (2Kx2K), response time < 4 ms, cryogenic and temporally uniform photon flux. MEMS, Resistor arrays, liquid cr...
STTR Phase I 2016 Department of DefenseAir Force -
Highly-mobile Autonomous Rapidly Relocatable Integrated Electro-optical Resources (HARRIER)
SBC: EXOANALYTIC SOLUTIONS INC Topic: AF16AT05ExoAnalytic Solutions, teamed with Texas A&M University, will develop Highly-mobile Autonomous Rapidly Relocatable Integrated Electro-optical Resources (HARRIER) with the goal being to design and demonstrate tracking of resident space objects (RSOs) in n...
STTR Phase I 2016 Department of DefenseAir Force -
Three-Dimensional Density Imaging by Rayleigh Scattering
SBC: METROLASER, INCORPORATED Topic: AF16AT06A diagnostic is proposed for obtaining instantaneous three-dimensional volumetric distributions of density in a flow field at velocities ranging from subsonic to supersonic. Two variants of laser-based Rayleigh scattering will be investigated, each of wh...
STTR Phase I 2016 Department of DefenseAir Force -
CyberSTEPS- Cyber Skills Training with Electronic Performance Support
SBC: TIER 1 PERFORMANCE SOLUTIONS LLC Topic: AF16AT08There are many challenges in creating Air Force systems that are resilient against cyber threats. The cyber environment and its threats are highly dynamic, requiring practices and training to be dynamic as well. Cyber threats must be considered during th...
STTR Phase I 2016 Department of DefenseAir Force