You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY22 is not expected to be complete until September, 2023.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. A Comprehensive Web Infrastructure for Standardizing, Storing, and Launching Density Functional Calculations of Materials and Chemical Compounds

    SBC: Citrine Informatics, Inc.            Topic: 9a

    Density functional theory is used by many researchers funded by the Department of Energy as a method for predicting the behavior of chemicals and materials used in energy applications. However, results of these calculations are often not standardized and, even when they are, expert-level understand of the methods is needed in order to properly perform a simulation. The energy research community a ...

    STTR Phase II 2016 Department of Energy
  2. A Diagnostic for Simultaneous Liquid and Vapor Distribution in Sprays Using Filtered Rayleigh and Mie Scattering

    SBC: Metrolaser, Inc.            Topic: 07d

    New automotive engine technologies, such as direct injection with stratified charge combustion, are being explored under programs of the DOE and others that offer significant increases in efficiency and reductions in emissions. Research tools are needed to help determine how best to adequately control the combustion process throughout the engine operating envelope, to optimize combustion efficienc ...

    STTR Phase II 2015 Department of Energy
  3. Advanced Compact X-Ray Spectrometer with High Resolution and Efficiency

    SBC: INCOM, INC.            Topic: 03a

    The combination of X-ray absorption spectroscopy (XAS) with x-ray emission spectroscopy (XES) provides unique diagnostic analysis of both the structure and chemical composition of complex heterogeneous materials. The penetration of X-rays make this method ideal for studying and optimizing material properties under realistic, real time reaction conditions with simultaneous analysis of r ...

    STTR Phase II 2014 Department of Energy
  4. Advanced Energy-Resolving Imaging Detectors for Applications at Pulsed Neutron Sources

    SBC: NOVA SCIENTIFIC INCORPORATED            Topic: 09a

    NOVA Scientific proposes the development of efficient position sensitive detectors capable of time-tagging epithermal energy neutrons with high accuracy and efficiency. These devices will be able to perform energy-resolved imaging at the pulsed neutron sources and detect every neutron with spatial resolution of & lt; 60 m and timing resolution & lt; 1 s for thermal neutrons and & lt;100 ns for epi ...

    STTR Phase II 2014 Department of Energy
  5. 26(a): High Duty Cycle Inverse Free Electron Laser

    SBC: Radiabeam Technologies, LLC            Topic: 26a

    Laser based advanced accelerators can achieve very high accelerating gradients, but their duty cycle is limited by the laser power availability and media recovery time. Inverse Free Electron Laser (IFEL) is a vacuum farfield laser accelerator scheme which does not rely on a medium (plasma) or a structure (metal or electric) and therefore is potentially capable of accelerating charged particles ver ...

    STTR Phase II 2016 Department of Energy
  6. Algal Bioflocculation for SolidLiquid Separation

    SBC: Microbio Engineering, Inc            Topic: 12c

    A key requirement for microalgae biofuels production is a very low cost harvesting technology. Commercially available solidliquid separation technologies applicable to microalgae, such as chemical coagulation, membrane separations and centrifugation, are too costly for biofuels production or other lowcost microalgae processes, such as wastewater treatment. A low cost harvesting process is bio floc ...

    STTR Phase II 2016 Department of Energy
  7. Automatic Calibration of High-Performance Metrological Instrumentation

    SBC: Abeam Technologies Inc.            Topic: 04c

    Metrology is a multi-billion dollar industry that is an indispensable part of science and manufacturing. A variety of techniques including interferometric microscopes, scanning electron microscopes (SEM), X-ray, and atomic force microscopes (AFM) are used in X-ray mirror manufacturing. The performance of any tool directly depends on the ability to characterize and tune it ...

    STTR Phase II 2015 Department of Energy
  8. Comprehensive Time-Resolved Molecular Speciation Of Gaseous And Particulate Organic Constituents In The Atmosphere

    SBC: AEROSOL DYNAMICS INC            Topic: 17d

    Organic chemicals comprise the dominant fraction of particulates found in atmospheric aerosols, and the largest proportions of these are secondary products formed in the atmosphere from oxidation of volatile organic compounds. Often these chemical transformations result from complex pathways involving species from different sources. To understand these processes, we need to be able to trace the ...

    STTR Phase II 2015 Department of Energy
  9. Data Driven Intent Recognition Framework

    SBC: Other Lab Inc.            Topic: NSF13599

    A critical aspect of exoskeleton control that has to date introduced a performance limitation is the ability of the exoskeleton to recognize the intent of the operator so it can apply assistance to their desired motion. This intent recognition effort is typically solved using ad-hoc methods where subject matter experts make design decisions and tune transitions to identify intended maneuvers as re ...

    STTR Phase II 2016 Department of DefenseSpecial Operations Command
  10. Development of Nuclear Quality Components Using Metal Additive Manufacturing

    SBC: RadiaBeam Systems, LLC            Topic: 19f

    A major problem with nuclear fission reactors is the welding of components of dissimilar metals, where the filler is usually of an additional metal alloy that is not necessarily the same as the two parts to be joined. Welding of metals will often have a heat affected zone (HAZ) and a thermo- mechanically affected zone (TMAZ), which need to be post-weld heat treated to minimize precipitation or seg ...

    STTR Phase II 2015 Department of Energy
US Flag An Official Website of the United States Government