You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Detecting Substandard, Nonconforming, Improperly Processed and Counterfeit Materiel

    SBC: Ocean Bay Information and Systems Management, LLC            Topic: DLA15C001

    "Micro-calorimetry is a Nondestructive Test (NDT) capable of detecting heat characteristics that could identify improperly processed, counterfeit, substandard, nonconforming or fake raw material prior to materials introduction into end-product production cycles. Current calorimetric technology is an extremely sensitive, expensive and time consuming process, utilizing an adiabatic or semi-adiabat ...

    STTR Phase I 2016 Department of DefenseDefense Logistics Agency
  2. Detecting Substandard, Nonconforming, Improperly Processed and Counterfeit Materiel

    SBC: VIBRANT CORP            Topic: DLA15C001

    Vibrant Corporation and Sandia National Laboratories (SNL) propose to apply Process Compensated Resonance Testing (PCRT) to the DLA's need for an NDI method to detect counterfeit, nonconforming and improperly processed materiel. PCRT collects and analyzes the resonance frequencies of a component to detect structural defects, characterize material, analyze population variation, monitor manufacturin ...

    STTR Phase I 2016 Department of DefenseDefense Logistics Agency
  3. Using Magnetic Levitation for Non-Destructive Detection of Defective and Counterfeit Materiel

    SBC: Nano Terra, Inc.            Topic: DLA15C001

    The introduction of substandard or counterfeit materials into the DoD supply chain can have extremely expensive, and potentially life threatening, consequences. Current techniques used to detect nonconforming materiel can be destructive (e.g., manual sectioning and inspection of a part), time consuming and expensive (e.g., micro-computed tomography, ultrasound), or provide only limited informatio ...

    STTR Phase I 2016 Department of DefenseDefense Logistics Agency
  4. Detecting Substandard, Nonconforming, Improperly Processed and Counterfeit Materiel

    SBC: Ocean Bay Information and Systems Management, LLC            Topic: DLA15C001

    Inspecting for and detecting counterfeit, unapproved material substitutions or substandard processed raw material using existing processes is difficult, time consuming and expensive.Ocean Bay, LLC and the Primary Investigator, Karen Bruer, formed a team consisting of Ocean Bay, LLC, Savanah River National Laboratory and Old Dominion University, to apply for DLA15C-001:Detecting Substandard, Noncon ...

    STTR Phase II 2017 Department of DefenseDefense Logistics Agency
  5. Detecting Substandard, Nonconforming, Improperly Processed and Counterfeit Materiel

    SBC: VIBRANT CORP            Topic: DLA15C001

    Vibrant Corporation and Sandia National Laboratories (SNL) propose to apply Process Compensated Resonance Testing (PCRT) to the DLA's need for an NDI method to detect substandard, counterfeit, nonconforming and improperly processed materiel. PCRT collects and analyzes the resonance frequencies of a component to detect structural defects, characterize material, analyze population variation, monitor ...

    STTR Phase II 2017 Department of DefenseDefense Logistics Agency
  6. Improved surface interface of OPF and PAN carbon fibers for Carbon-Carbon processing

    SBC: ALKEMIX CORPORATION            Topic: DLA23A003

    Specialized materials such as Carbon-Carbon (C-C) are required as primary structural and thermal protection elements to sustain the severe temperatures on the surface of Hypersonic Vehicles during high-speed flight. The C-C material currently qualified at Northrop in Hypersonic Glide-Bodies or “Aeroshells” consist of phenolic resin and a low fired, stretch broken polyacrylonitrile fiber (LFSP ...

    STTR Phase I 2023 Department of DefenseDefense Logistics Agency
  7. Low Cost MLMI as a Hypersonic Aerostructure with TPS

    SBC: Peregrine Falcon Corporation            Topic: DLA23A003

    As Hypersonic weapons enter the US arsenal there is a need for cost control and high rate of production which is currently not being met by the current state of the art material systems, like Carbon-Carbon. What is needed is a Thermal Protection System (TPS) for aero structures that can survive the Hypersonic environments of high heat in oxygenated environments. A means to do this is using Peregr ...

    STTR Phase I 2023 Department of DefenseDefense Logistics Agency
  8. 3D Printed Ablative Re-Entry Vehicle Heat Shields

    SBC: MANTIS COMPOSITES INC            Topic: DLA23A003

    Re-Entry Vehicles (RVs) are a critical component of the strategic weapon arsenal. While physics packages themselves have a substantial deterrence value, the ability to deliver those weapons quickly and with high survivability unlocks the ability to maintain a truly global deterrence. However, these thermal protection systems are encountering two developing challenges: Industrial Base Attrition: Th ...

    STTR Phase I 2023 Department of DefenseDefense Logistics Agency
US Flag An Official Website of the United States Government