You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY22 is not expected to be complete until September, 2023.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Flexible Low Temperature CO2 Capture System, E-CACHYS

    SBC: ENVERGEX LLC            Topic: 1

    This project focuses on the design, integration and optimization of a flexible natural gas combined cycle plant with carbon capture, capable of operating in a highly variable renewable energy environment. Renewable energy sources such as wind and solar power offer unique solutions in our quest to reduce global carbon dioxide (CO2) emissions. However, the increasing penetration of these high variab ...

    STTR Phase II 2020 Department of EnergyARPA-E
  2. Energy-Efficient Reconfigurable Universal Accelerator Interconnect

    SBC: Freedom Photonics LLC            Topic: 05a

    Recent advances in computing systems fundamentally changed and shaped almost every aspect of today’s society; from healthcare to finances and scientific discoveries, our everyday lives will depend more and more on computing and communication infrastructures and their capability to process and deliver critical information in real time. However, as high-performance-computing systems and datacenter ...

    STTR Phase II 2020 Department of Energy
  3. Retrofittable and Transparent Super-Insulator for Single-Pane Windows

    SBC: NANOSD, INC.            Topic: DEFOA0001429

    NanoSD, Inc. with its partners will develop a transparent, nanostructured thermally insulating film that can be applied to existing single-pane windows to reduce heat loss. To produce the nanostructured film, the team will create hollow ceramic or polymer nanobubbles and consolidate them into a dense lattice structure using heat and compression. Because it is mostly air, the resulting nanobubble s ...

    STTR Phase II 2016 Department of EnergyARPA-E
  4. Low-Cost Hybrid Plasmonic and Photonic "Campanile" Near-Field Probes by Nanoimprint Lithography

    SBC: HighRI Optics, Inc.            Topic: 07a

    Near-field scanning optical microscopy (NSOM) is a powerful and unique approach to characterize the chemical, physical and potentially biochemical properties of materials with the nanometer scale resolution in real-time. A key element for NSOM systems that combine optical spectroscopy with scanning probe microscopy, is the actual probe itself. While many commercial vendors offer off-the-shelf meta ...

    STTR Phase II 2020 Department of Energy
  5. Photonic Memory Controller Module (P-MCM)

    SBC: Freedom Photonics LLC            Topic: 04a

    As computational density for high-performance computing and big-data services continues to scale, performance scalability of next generation computing systems is becoming increasingly constrained by limitations in memory access, power dissipation and chip packaging. The processor-memory communication bottleneck, a major challenge in current multicore processors due to limited pin-out and power bud ...

    STTR Phase II 2020 Department of Energy
  6. Quench Detection Method for Large Superconducting Magnets using Robust MEMS Acoustic Sensor Arrays

    SBC: Tanner Research, Inc.            Topic: 23c

    High Temperature Superconducting (HTS) materials have excellent mechanical and electrical properties that are attractive for various applications such as power cables and high field, high current superconducting magnets, particularly playing a key role in the commercialization of fusion energy machines. However, HTS materials have very slow normal zone propagation velocities (NZPV) (2-3 orders of ...

    STTR Phase II 2020 Department of Energy
  7. The Energy and Cost-efficient E-waste Recovery Project for Rare-earths and Precious Metals

    SBC: Quantum Ventura, Inc.            Topic: 07d

    Idaho National Laboratory (INL), under funding from the Critical Materials Institute(CMI), has developed a US patented technology to reclaim valuable metals from waste electronic equipment. The Electrochemical Recycling Electronic Constituents of Value (E-RECOV) method uses an electrochemical cell to efficiently recover the bulk of metals from discarded electronics, leading to more complete recycl ...

    STTR Phase II 2020 Department of Energy
  8. NOVEL POLYMER-ELECTROLYTE MEMBRANE DEVELOPMENT FOR CARBON DIOXIDE CONVERSION TO SOLAR FUEL

    SBC: Opus 12 Incorporated            Topic: 19b

    Solar fuels production is necessary for the future of the global economy. To produce solar fuels from CO2, a highly conductive and stable polymer-electrolyte is needed for this demanding application. A promising class of polymer-electrolytes for electrochemical energy applications has been developed, and this project’s goal is to scale-up production, add quality controls, and reduce waste. The n ...

    STTR Phase II 2020 Department of Energy
  9. Novel Carbon Fiber Synthesis Process Based on Joule Heating

    SBC: VURONYX TECHNOLOGIES LLC            Topic: 11c

    Current methods for manufacturing carbon fiber rely on high temperature ovens for the stabilization/oxidation and carbonization steps, which tend to be slow and energy intensive. As such, carbon fiber composites are expensive then steel, which limits their use in costsensitive, highvolume industrial applications such as automobiles, oil and gas, and infrastructure. To reduce energy consumption and ...

    STTR Phase II 2016 Department of Energy
  10. A Comprehensive Web Infrastructure for Standardizing, Storing, and Launching Density Functional Calculations of Materials and Chemical Compounds

    SBC: Citrine Informatics, Inc.            Topic: 9a

    Density functional theory is used by many researchers funded by the Department of Energy as a method for predicting the behavior of chemicals and materials used in energy applications. However, results of these calculations are often not standardized and, even when they are, expert-level understand of the methods is needed in order to properly perform a simulation. The energy research community a ...

    STTR Phase II 2016 Department of Energy
US Flag An Official Website of the United States Government