Award Data

Increasing system capabilities in terms of weapon systems, ISR payloads, GNC, etc., enabled by smaller and more capable electronics systems have led to a trend for overall size reduction in military aircraft. This has resulted in a reduction in the avail...

Current scene projection hardware is challenged to simultaneously meet the requirements for high peak temperature (> 2000K), high resolution (2Kx2K), response time < 4 ms, cryogenic and temporally uniform photon flux. MEMS, Resistor arrays, liquid cr...

A diagnostic is proposed for obtaining instantaneous three-dimensional volumetric distributions of density in a flow field at velocities ranging from subsonic to supersonic. Two variants of laser-based Rayleigh scattering will be investigated, each of wh...

There are many challenges in creating Air Force systems that are resilient against cyber threats. The cyber environment and its threats are highly dynamic, requiring practices and training to be dynamic as well. Cyber threats must be considered during th...

The ability of Large-eddy simulation (LES) techniques to accurately predict combustion instabilities and the onset of lean blow-out is not yet firmly established, especially in realistic operating conditions. A number of modeling choices play an importan...

An experiment to obtain validation data on the transient aerothermoelastic response of a curved panel in hypersonic flows will be designed and evaluated for its feasibility. Significant challenges must be overcome for a successful experimental campaign i...

In this Air Force Phase I STTR program, MATECH proposes to demonstrate novel pre-ceramic polymer systems complimenting the development of Ultra High Temperature (UHT), high ceramic yield, refractory ceramic matrix composites (CMCs). A leader in developme...

In this Phase 1 proposal, Vuronyx Technologies in collaboration with Georgia Institute of Technology, Atlanta (GT) intends to fabricate composite panels using high strength and high modulus carbon fibers synthesized from polyacrylonitrile (PAN) precursor...

Advanced infrared imaging techniques are of great interest but associated high costs of III-V and II-VI SWIR and MWIR materials prohibit their widespread deployment and integration with other optoelectronic devices. Freedom Photonics and its team partner...

Tensile-strained germanium tin structures will be developed for infrared emitters and detectors that are compatible with silicon fabrication processes.Optical detectors in the wavelength range of 2-5 microns will be developed by using GeSn on silicon ...