You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY22 is not expected to be complete until September, 2023.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
-
Novel, Low-Cost Phased arrays Manufactured by 3D Printing (1000-325)
SBC: SI2 TECHNOLOGIES, INC Topic: N14AT021SI2 Technologies, Inc. (SI2) proposes to accelerate development of printed, high-efficiency phased arrays operating at Navy-relevant frequencies. The proposed development effort will include optimization of the array printing techniques from Phase I to meet the Navys phased array performance goals. The printed arrays will incorporate both printed radiating elements and an innovative printed packag ...
STTR Phase II 2016 Department of DefenseNavy -
Nonlinear-DSP-Enabled RF-Photonic Link
SBC: RAM PHOTONICS LLC Topic: N14AT023Digital equalizers have been the major enablers in RF communications in terms of managing component imperfections and channel impairments. Specifically, the ever increasing processing power of the dedicating computing processors has availed a steady increase in the ability of complex communication systems to deal with impairments as well as allowing higher capacities in the information transfer.On ...
STTR Phase II 2016 Department of DefenseNavy -
In Situ Inspection of Additive Manufactured Metallic Parts Using Laser Ultrasonics
SBC: INTELLIGENT OPTICAL SYSTEMS INC Topic: N15AT008Additive manufacturing (AM) is a very promising technique for rapid, low-cost production of aircraft parts directly from a CAD file. AM is especially appealing for complex parts that would be costly or impossible to fabricate by machining or casting. At the current time there are no reliable, cost-effective techniques to qualify the finished parts. Several government studies have noted this gap an ...
STTR Phase II 2016 Department of DefenseNavy -
High Fidelity Rotorcraft Towing Modeling and Simulation with Towed Magnetic Anomaly Detection System
SBC: ADVANCED ROTORCRAFT TECHNOLOGY, INC. Topic: N15AT009Towing of a Magnetic Anomaly Detection (MAD) system is an important aspect of rotorcraftmaritime operation. The oscillatory rotorcraft combined with the long and flexible towingcable, the low mass ratio of the towed body to the towing aircraft, and the rotor wake effecton the towed body presents a challenge for integration of a modern MAD system withrotorcraft platform. The research objective is t ...
STTR Phase II 2016 Department of DefenseNavy -
In-Air E-field Sensor for Airborne Applications
SBC: White River Technologies Inc Topic: N15AT004The U.S. Navy is seeking new technologies and platforms to advance airborne anti-submarine warfare (ASW) and related maritime surveillance. Current magnetic anomaly detection (MAD) sensors, such as the latest versions of atomic magnetometers, are capable of very low noise operation. However, the performance of these sensors can be limited by the geomagnetic noise environment more so than by eithe ...
STTR Phase II 2016 Department of DefenseNavy -
NAVAL INTEGRATED FIRE CONTROL COUNTER AIR (NIFC-CA)
SBC: APTIMA INC Topic: N09T007The Navy faces a significant challenge to its dominance of sea and air given the Anti-Access Area-Denial (A2AD) capabilities of major powers. The Navy's response, in part, is to implement technical capabilities that enable platforms to coordinate in new ways to execute offensive and defensive actions at very long range. While the Navy finalizes this Naval Integrated Fire Control-Counter Air (NIFC- ...
STTR Phase II 2016 Department of DefenseNavy -
Light-Weight Solar Cells with High Specific Power and Conversion Efficiency
SBC: AGILTRON, INC. Topic: N14AT003Agiltron in collaboration with National Renewable Energy Laboratory (NREL) will develop a new class of high-efficiency and lightweight broadband inverted metamorphic multi-junction (IMM) solar cells for the uninterrupted flight missions of unmanned aerial vehicles (UAVs). The approach is closely coupled with Agiltrons extensive experience in high-transmittance broadband and wide-angle anti-reflect ...
STTR Phase II 2016 Department of DefenseNavy -
Bonded Joint Analysis Method
SBC: M4 ENGINEERING, INC. Topic: N12AT004During Phase I and Phase II, M4 Engineering, Inc. and Sandia National Laboratories have created a unique bonded joint analysis methodology and associated software. During Phase II.5, the developed techniques will be further enhanced and a fully functional commercial analysis code (SIMULIA/Abaqus) plug-in will be created. The software plug-in will make the advanced technology accessible to all leve ...
STTR Phase II 2016 Department of DefenseNavy -
Development of a Micro-glider for Oceanographic Air-Sea Interaction Sampling
SBC: MRV SYSTEMS LLC Topic: N14AT020This proposal is a collaborative effort between MRV Systems and the Woods Hole Oceanographic Institution. The goal is to develop a new, small, inexpensive autonomous vehicle to investigate mixed layer dynamics and turbulent mixing. The preliminary Phase I design, a Diagonally Operating Platform (DOP), is a profiling float with moveable fins. DOP will turn toward an intended direction within a few ...
STTR Phase II 2016 Department of DefenseNavy -
3D Acoustic Model for Geometrically Constrained Environments
SBC: HEAT, LIGHT, AND SOUND RESEARCH, INC. Topic: N16AT018Systems that operate in constrained environments depend on the acoustics in several ways. Harbor defense systems detect intruders (people and/or vessels) by either listening for their noises (passively) or by pinging on them and detecting their echoes (actively). Furthermore, such systems may also form the equivalent of an underwater cell phone network using sound to carry the information. The aco ...
STTR Phase I 2016 Department of DefenseNavy