Award Data

Replacement of petroleum based vehicles with fuel cell electric vehicles operating on hydrogen produced from domestically available resources would dramatically decrease emissions of greenhouse gases and other pollutants as well as reduce dependence on oil from politically volatile regions of the world. One major inhibitor to a hydrogen society is the lack of infrastructure, which requires hydroge ...

Advanced turbine component manufacturing process by conventional processes are comprised of multiple steps, turbine components are machined from a forged or rolled billet originally made from casting/ingot metallurgy. As a result a long lead times are required prior to acquisition. General Statement of how this problem being addressed: Rapid fabrication of this component can be done by Additive Ma ...

Statement of the problem or situation that is being addressed in your application. Coal-generated power represents a major source of electrical generation in the Nation, and will likely remain so for the foreseeable future. However, recently proposed limits on CO2 emissions from new electrical generation capacity will necessitate carbon capture functions to be installed on any new coal-fired power ...

Hydraulic fractures must be contained within the target formation so that they do not contact and potentially contaminate sources of drinking water. To mitigate this risk, research is needed to develop technologies that will advance our ability to diagnose, quantify, and map hydraulic fractures and thus help mitigate the danger that hydraulic fracturing results in the contamination of subsurface p ...

The Department of Energy needs improved radiation resistant electrical insulation materials for the superconducting magnet coils in fusion reactors. To achieve safe, reliable, economic and environmentally benign fusion energy system, DOE is seeking organic/inorganic insulation-capable materials that are wrappable. These materials under irradiation will enable magnet coils to: (1) operate reliably ...

Currently, the most promising types of radiotherapy is proton or carbon therapy, as they have demonstrated significant improvements in clinical efficiency and reduced toxicity profiles. Unfortunately, the high cost of treatments using both proton and carbon beams is the limiting factor preventing hadron therapy from becoming the standard of care for a wider range of cancers. Designing a linear acc ...

In the near term, in order to mitigate carbon emissions to the extent possible while carbon-neutral, renewable energy resources are developed sufficiently to address the total demand of the Nation, there is a significant need for technologies capable of up-converting captured carbon dioxide either to value-added products or to forms able to be safely sequestered. In particular, access must be open ...

Hyper Tech proposes to develop a long-length structured cable for use in superconducting accelera- tor magnets. The Medium-energy Electron-Ion Collider (MEIC) is a proposed colliding beam facility in which polarized beams of ions and electrons would be collided at energies up to ~100 GeV/u for ions and 20 GeV for electrons. The arc lattice for its ion ring would contain a total of 128 half-cells, ...

Density functional theory is used by many researchers funded by the Department of Energy as a method for predicting the behavior of chemicals and materials used in energy applications. However, results of these calculations are often not standardized and, even when they are, expert-level understand of the methods is needed in order to properly perform a simulation. The energy research community a ...

This proposal is in response to the DOE topic 12a on membrane technology, which represents an important method in water purification and recovery for industrial and environmental applications. Energy-related cost and water waste are significant issues with reverse osmosis (RO) membrane commonly used today and increased attention is being given to Nano-filtration (NF) technology. NF covers treatmen ...