You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Accelerated Burn-In Process for High Power Quantum Cascade Lasers to Reduce Total Cost of Ownership

    SBC: ADTECH PHOTONICS, INC.            Topic: N20BT029

    Quantum Cascade Lasers (QCLs) are one of the most versatile sources of radiation in the mid-infrared range and have found applications in a variety of fields. Despite their widespread adoption, one of the main hurdles holding QCLs back from large volume manufacturing is the large cost of ownership. While QCLs, like most semiconductor devices based on III-V compounds, can leverage the economies of ...

    STTR Phase I 2021 Department of DefenseNavy
  2. Additive Manufacturing for Microwave Vacuum Electron Device Cost Reduction

    SBC: RADIABEAM TECHNOLOGIES, LLC            Topic: N16AT010

    The Department of the Navy has a need for the development of an additive manufacturing (AM) process for key vacuum electronic device components to meet on-demand, flexible, and affordable manufacturing requirements. The developed manufacturing method has a potential to reduce cost of vacuum electronics by as much as 70% as well as simplify and hence expedite production process of these devices by ...

    STTR Phase I 2016 Department of DefenseNavy
  3. Advanced Silicon Diode Switch for HPRF Systems

    SBC: RADIATION DETECTION TECHNOLOGIES, INC.            Topic: N15AT023

    Silicon-based photoconductive switch technology, despite its widespread industrial use, has not reached its limit in repetition-rate nor recovery-time. While traditional Si-PCSS systems have demonstrated poor recovery time (tens to hundreds of microseconds), new understanding in absolute photo-carrier generation and the resultant reduced sweepout time, provides one means to get beyond this seeming ...

    STTR Phase I 2015 Department of DefenseNavy
  4. Aircraft Carrier-based Precision Ship-Relative Navigation Guidance for Aircraft Landing under Emissions Control Conditions

    SBC: SA PHOTONICS, LLC            Topic: N15AT014

    This proposal describes an all optical fixed wing landing system for a aircraft carrier capable of flying an aircraft all the way to landing in a RF denied environment. The precision, reliability and accuracy of this system will allow control the aircraft without the help from the pilot all the way to touch down. It will work seamlessly with UAVs and manned aircraft that have been retrofitted with ...

    STTR Phase I 2015 Department of DefenseNavy
  5. Air Cycle Machine Low Friction, Medium Temperature, Foil Bearing Coating

    SBC: ACREE TECHNOLOGIES INCORPORATED            Topic: N16AT005

    The purpose of this project is to demonstrate the feasibility of using an innovative, durable, low friction, and non-toxic solid lubricant coating for foil air bearings for air cycle machines (ACM). Acrees coating provides superior wear characteristics at all temperatures and provides a substantial improvement over polyimide type coatings that are currently used on ACMs. The coating consists of tw ...

    STTR Phase I 2016 Department of DefenseNavy
  6. Air Cycle Machine Low Friction, Medium Temperature, Foil Bearing Coating

    SBC: IBC Materials & Technologies, LLC            Topic: N16AT005

    In this proposed SBIR program, IBC Materials & Technologies, in conjunction with our industry partner Mechanical Solutions, Inc. (MSI) and Texas A&M University, will leverage our knowledge and experience in the domain of industrial metallic coatings to develop a metallurgical coating solution for the Air Foil Bearing. IBC has deep expertise in a variety of industrial coating processes including mu ...

    STTR Phase I 2016 Department of DefenseNavy
  7. Analysis and Modeling of Erosion in Gas-Turbine Grade Ceramic Matrix Composites (CMCs)

    SBC: ALPHASTAR TECHNOLOGY SOLUTIONS LLC            Topic: N19BT033

    A significant barrier to the insertion of ceramic matrix composite (CMC) materials into advanced aircraft engines is their inherent degradation under erosion and post erosion. Our team will develop and demonstrate a physics-based model for erosion/post erosion of CMC’s at room and elevated temperatures (RT/ET). The ICME (Integrated Computational Material Engineering) Physics based Multi Scale Mo ...

    STTR Phase II 2021 Department of DefenseNavy
  8. A Unified System-of-Systems Design and Analysis Toolset for Aircraft Thermal Management Systems

    SBC: PC KRAUSE & ASSOCIATES INC            Topic: N19BT025

    Modern and next generation military aircraft face increasing challenges as thermal demands grow while available heat sinks reduce. Legacy platforms upgraded with advanced electrical systems are also encountering similar thermal constraints. Modeling and simulation (M&S) tools provide a cost-effective solution to the design, analysis, and optimization of growing thermal management challenges, but t ...

    STTR Phase II 2021 Department of DefenseNavy
  9. Bonded Joint Analysis Method

    SBC: M4 ENGINEERING, INC.            Topic: N12AT004

    During Phase I and Phase II, M4 Engineering, Inc. and Sandia National Laboratories have created a unique bonded joint analysis methodology and associated software. During Phase II.5, the developed techniques will be further enhanced and a fully functional commercial analysis code (SIMULIA/Abaqus) plug-in will be created. The software plug-in will make the advanced technology accessible to all leve ...

    STTR Phase II 2016 Department of DefenseNavy
  10. Compact Air Compressor for Aircraft Active Flow Control

    SBC: CANDENT TECHNOLOGIES INCORPORATED            Topic: N21AT017

    Active Flow Control (AFC) systems require a compressed air source.  Candent is proposing to use its extensive turbomachinery experience and technology to design a high efficiency air compressor with proper flow and pressure ratio to meet the STTR requirements, including expected operational environments (ambient air temperature and pressure, sand and dirt). Candent will utilize its advanced compr ...

    STTR Phase I 2021 Department of DefenseNavy
US Flag An Official Website of the United States Government