You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Additive Manufacturing for Microwave Vacuum Electron Device Cost Reduction

    SBC: RADIABEAM TECHNOLOGIES, LLC            Topic: N16AT010

    The Department of the Navy has a need for the development of an additive manufacturing (AM) process for key vacuum electronic device components to meet on-demand, flexible, and affordable manufacturing requirements. The developed manufacturing method has a potential to reduce cost of vacuum electronics by as much as 70% as well as simplify and hence expedite production process of these devices by ...

    STTR Phase I 2016 Department of DefenseNavy
  2. Advanced Silicon Diode Switch for HPRF Systems

    SBC: RADIATION DETECTION TECHNOLOGIES, INC.            Topic: N15AT023

    Silicon-based photoconductive switch technology, despite its widespread industrial use, has not reached its limit in repetition-rate nor recovery-time. While traditional Si-PCSS systems have demonstrated poor recovery time (tens to hundreds of microseconds), new understanding in absolute photo-carrier generation and the resultant reduced sweepout time, provides one means to get beyond this seeming ...

    STTR Phase I 2015 Department of DefenseNavy
  3. Advanced Solid State Switch (Diode) Materials for High Rep Rate Pulse Power Systems and High Power Radio Frequency (HPRF) Applications

    SBC: Applied Physical Electronics, L.C.            Topic: N15AT023

    Direct conversion of DC energy to RF energy via switched systems such as Class D, E, and F amplifiers is limited by the switches currently available. Presently available switches are voltage limited, resistive transition time limited, and rate of current rise limited. Furthermore, high power switched amplifiers are limited by the thermal dissipation of the switches which are required to open and c ...

    STTR Phase I 2015 Department of DefenseNavy
  4. Aircraft Carrier-based Precision Ship-Relative Navigation Guidance for Aircraft Landing under Emissions Control Conditions

    SBC: SA PHOTONICS, LLC            Topic: N15AT014

    This proposal describes an all optical fixed wing landing system for a aircraft carrier capable of flying an aircraft all the way to landing in a RF denied environment. The precision, reliability and accuracy of this system will allow control the aircraft without the help from the pilot all the way to touch down. It will work seamlessly with UAVs and manned aircraft that have been retrofitted with ...

    STTR Phase I 2015 Department of DefenseNavy
  5. Air Cycle Machine Low Friction, Medium Temperature, Foil Bearing Coating

    SBC: ACREE TECHNOLOGIES INCORPORATED            Topic: N16AT005

    The purpose of this project is to demonstrate the feasibility of using an innovative, durable, low friction, and non-toxic solid lubricant coating for foil air bearings for air cycle machines (ACM). Acrees coating provides superior wear characteristics at all temperatures and provides a substantial improvement over polyimide type coatings that are currently used on ACMs. The coating consists of tw ...

    STTR Phase I 2016 Department of DefenseNavy
  6. Air Cycle Machine Low Friction, Medium Temperature, Foil Bearing Coating

    SBC: IBC Materials & Technologies, LLC            Topic: N16AT005

    In this proposed SBIR program, IBC Materials & Technologies, in conjunction with our industry partner Mechanical Solutions, Inc. (MSI) and Texas A&M University, will leverage our knowledge and experience in the domain of industrial metallic coatings to develop a metallurgical coating solution for the Air Foil Bearing. IBC has deep expertise in a variety of industrial coating processes including mu ...

    STTR Phase I 2016 Department of DefenseNavy
  7. Bonded Joint Analysis Method

    SBC: M4 ENGINEERING, INC.            Topic: N12AT004

    During Phase I and Phase II, M4 Engineering, Inc. and Sandia National Laboratories have created a unique bonded joint analysis methodology and associated software. During Phase II.5, the developed techniques will be further enhanced and a fully functional commercial analysis code (SIMULIA/Abaqus) plug-in will be created. The software plug-in will make the advanced technology accessible to all leve ...

    STTR Phase II 2016 Department of DefenseNavy
  8. Combining GaN and SiGe MMICs for Efficient and Innovative Radar Systems

    SBC: RDRTEC INCORPORATED            Topic: N14AT007

    This effort proposes to design, develop and fabricate prototype SiGe MMICs that when combined with GaN MMICs forms the basis for additional simultaneous modes and more efficiency for the C-band Radar Automatic Collision Avoidance System (RACAS). The addition of these MMICs will enable digitally controlled pulse mode interleaving and switchable and simultaneous polarizations for enhanced Coherent A ...

    STTR Phase I 2014 Department of DefenseNavy
  9. Compact Megavolt Switch Utilizing Novel Switching Mediums

    SBC: RADIABEAM TECHNOLOGIES, LLC            Topic: N14AT018

    A rugged, laser-free design of electrically controlled MV-class, ns-sub-ns switch is proposed to develop in Phase I. The novel switch design is based on combination of Drift Step Recovery Diode, and inverse-switchable dynistor used as a closing circuit and correspondingly matched charging/discharging resonant pulsed circuitry. The approach is capable of generating of fraction of MV pulses at up to ...

    STTR Phase I 2014 Department of DefenseNavy
  10. Comprehensive Bonded Joint Analysis Method

    SBC: M4 ENGINEERING, INC.            Topic: N12AT004

    Using its Phase I program results, M4 Engineering, Inc. and Sandia National Laboratories will continue to create a unique bonded joint analysis methodology and associated software. Surrogate traction-separation models will be created that efficiently capture the behavior that occurs for real bonded joints. Mixed mode loading, including compressive normal tractions and relative displacements will b ...

    STTR Phase II 2014 Department of DefenseNavy
US Flag An Official Website of the United States Government