You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Ignition Modeling for Present and Future Combustors and Augmentors

    SBC: COMBUSTION SCIENCE & ENGINEERING, INC.            Topic: N17AT003

    The ability to predict the ignitibility potential of a combustor at various operating conditions is not practical at this time due to the complexity of this process. Ignition within a gas turbine combustor is dependent on various parameters; including spark (or plasma) energy, flow conditions, fuel/air ratio, and fuel spray density. All these parameters must be properly predicted in order to effec ...

    STTR Phase II 2018 Department of DefenseNavy
  2. Rapid Identification of Effects of Defects within Metal Additive Manufacturing (RIED-AM)

    SBC: Intelligent Automation, Inc.            Topic: N18AT013

    Additive manufacturing (AM) systems, especially metal AM, bring revolutionary capabilities, but suffer from a lack of understanding of the defects that exist within the components. In this research, based on selective experimental study and numerical simulations, we will develop an empirical database of defects and their effects on mechanical properties using Laser Powder Bed Fusion (LPBF) technol ...

    STTR Phase I 2018 Department of DefenseNavy
  3. Analysis and Application of Treatments to Mitigate Exfoliation Corrosion (Delamination) of 5XXX Series Aluminum

    SBC: OCEANIT LABORATORIES INC            Topic: N18AT016

    Oceanit proposes to research and develop chemical or non-chemical methods and processes to impart surface morphology modifications to aluminum-magnesium (Al-Mg) alloys to mitigate and increase the exfoliation corrosion resistance.

    STTR Phase I 2018 Department of DefenseNavy
  4. Situational Awareness for Mission Critical Ship Systems using Probabilistic Knowledge Graph

    SBC: INTELLIGENT FUSION TECHNOLOGY, INC.            Topic: N18AT009

    This effort proposes to develop situational awareness methodologies for mission critical ship system based on the state-of-the-art probabilistic knowledge graph (KG) and deep learning. The proposed KG approach can incorporate various data fusion technologies for analysis of unstructured data (text, images, etc.) and structured data (signal feeds, database items, etc.) for automated decision suppor ...

    STTR Phase I 2018 Department of DefenseNavy
  5. Environmental Temperature Sensing Tow Cable

    SBC: MAKAI OCEAN ENGINEERING INC            Topic: N18AT017

    The U.S. Navy currently utilizes a number of towed systems from surface ship and submarines for sensing and communication applications. In a number of these cases, a tow cable extends either down from a surface ship or up from a submarine through the upper part of the water column where seawater temperature can be both highly variable vs. depth and dynamic in time and geographic location. Having a ...

    STTR Phase I 2018 Department of DefenseNavy
  6. Reduced Cavitation, High Efficiency Outboard Propulsors for Small Planing Craft

    SBC: CANDENT TECHNOLOGIES INCORPORATED            Topic: N17AT019

    The Candent Technologies “Reduced Cavitation, High Efficiency Outboard Propulsor for Small Planing Craft” Phase II program is structured to develop an advanced waterjet propulsor for the Combat Rubber Raiding Craft (CRRC). This new axial flow waterjet propulsion system is designed as a “bolt on” assembly that replaces the lower unit of the existing MFE 55 outboard motor. This new propulsio ...

    STTR Phase II 2018 Department of DefenseNavy
  7. Aircraft Carrier-based Precision Ship-Relative Navigation Guidance for Aircraft Landing under Emissions Control Conditions

    SBC: COHERENT TECHNICAL SERVICES, INC.            Topic: N15AT014

    The ability to refuel piloted aircraft in flight is considered a strategic military advantage and has been a critical element of success in nearly every US and NATO military engagement of the jet age. One key asset used to facilitate aerial refueling is PMA-201’s Aerial Refueling Store (ARS), which allows fighters and other store-carrying aircraft to be reconfigured as tankers. The ARS is set to ...

    STTR Phase II 2018 Department of DefenseNavy
  8. Nondestructive Evaluator for Polymer Ablatives (NEPAL)

    SBC: Intelligent Automation, Inc.            Topic: N18AT011

    Materials for thermal protection are required to protect structural components of space vehicles during the re-entry stage, missile launching systems, and solid rocket motors (SRMs). Polymer resins that have high char retention (e.g., phenolic resins) are the most common matrices in the composite materials for rigid thermal protection systems (TPSs) due to their tunable density, lower cost, and hi ...

    STTR Phase I 2018 Department of DefenseNavy
  9. A Scalable Event Extractor for Multi-Level Event Data and Pattern Archiving: SEE

    SBC: Intelligent Automation, Inc.            Topic: N17AT022

    To address the need of auto-extracting data relevant to significant events and to archive patterns, Intelligent Automation, Inc. (IAI) team proposes to continue developing a Scalable Event Extractor for Multi-Level Event Data and Pattern Archiving: SEE. The key innovations of our proposed SEE system are (1) a large class of analytics that extract valuable and important information from raw data, a ...

    STTR Phase II 2018 Department of DefenseNavy
  10. Novel Separator Materials for Achieving High Energy/Power Density, Safe, Long-Lasting Lithium-ion Batteries for Navy Aircraft Applications.

    SBC: OCEANIT LABORATORIES INC            Topic: N16AT008

    Oceanit proposes to develop and demonstrate novel, tailored, designer separator materials with optimized properties to maximize lithium-ion cell/battery performance, life, safety and reliability.

    STTR Phase II 2018 Department of DefenseNavy
US Flag An Official Website of the United States Government