You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY22 is not expected to be complete until September, 2023.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Affordable 3D Printed Phased Arrays

    SBC: OPTOMEC, INC.            Topic: N14AT021

    A new generation of additive manufacturing (AM) techniques is expanding the possibilities of sensor and antenna design, with important implications for the performance and cost of finished devices. Optomec, Inc., with its proprietary Aerosol Jet technology, is a leader in the conformal printing of conductors and dielectrics on unusual geometries while the Georgia Tech Research Institute (GTRI) has ...

    STTR Phase I 2014 Department of DefenseNavy
  2. Analysis and Application of Treatments to Mitigate Exfoliation Corrosion (Delamination) of 5XXX Series Aluminum

    SBC: OCEANIT LABORATORIES INC            Topic: N18AT016

    Oceanit proposes to research and develop chemical or non-chemical methods and processes to impart surface morphology modifications to aluminum-magnesium (Al-Mg) alloys to mitigate and increase the exfoliation corrosion resistance.

    STTR Phase I 2018 Department of DefenseNavy
  3. A universal framework for non-deteriorating time-domain numerical algorithms in Maxwell's electrodynamics

    SBC: COMPUTATIONAL SCIENCES LLC            Topic: A13AT008

    The project will remove a key difficulty that currently hampers many existing methods for computing unsteady electromagnetic waves on unbounded regions. Numerical accuracy and/or stability may deteriorate over long times due to the treatment of artificial outer boundaries. We propose to develop a universal algorithm and software that will correct this problem by employing the Huygens'principl ...

    STTR Phase I 2013 Department of DefenseArmy
  4. Carbon NanotubeCopper Composite as Electron Emitter for Passive Spacecraft Discharging

    SBC: CFD RESEARCH CORP            Topic: AF18AT011

    This SBIR project will develop and demonstrate efficient electron emitter based on carbon nanotubecopper (CNT-Cu) composite for passive discharging of spacecraft in plasma environment. A spacecraft moving through harsh plasma environment collects electrons, which leads to the spacecraft charging up to several kilovolts. High voltage between different parts of the spacecraft can ignite arcing, whic ...

    STTR Phase I 2018 Department of DefenseAir Force
  5. Cobalt-Free Environmentally Green Process to Produce Fine Grained WC

    SBC: Thor Technologies, Inc.            Topic: OSD12T07

    The proposed work will result in a method for production of dense, hard, tough, strong tungten carbide (WC) ceramic material for ultimate use as the penetrating core in armor piercing projectiles. Focus is on the development and feasibility of a titanium silicon carbide (Ti3SiC2) based matrix as a replacement for cobalt based materials currently used. Ti3SiC2 is a so called ductile ceramic which ...

    STTR Phase I 2013 Department of DefenseArmy
  6. Common Situation Awareness Tool (CSAT)

    SBC: Tier 1 Performance Solutions, LLC            Topic: MDA13T004

    Tier1 Performance Solutions proposes to develop CSAT (Common Situation Awareness Tool), a solution that supports more effective event integration and task management, in order to improve situation awareness and knowledge sharing for missile defense system users and stakeholders. At the core of the CSAT solution is an active knowledge management platform designed so that all users share a common sc ...

    STTR Phase I 2014 Department of DefenseMissile Defense Agency
  7. Compact Laser Drivers for Photoconductive Semiconductor Switches

    SBC: ASR Corporation            Topic: DTRA16A004

    A compact laser driver will allow photoconductive semiconductor switches to be used in small EMP simulator "building blocks" (EMPBB). Combined with a battery powered on-board pulsed power system, these EMPBBs will allow the construction of flexible EMP test facilities with nothing more than a single fiber optic timing connection to each EMPBB.

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  8. Compact Megavolt Switch Utilizing Novel Switching Mediums

    SBC: ASR Corporation            Topic: N14AT018

    Switches must perform under rather dramatic conditions compared to other components and switching media are of utmost importance.

    STTR Phase I 2014 Department of DefenseNavy
  9. Corrosion Protection of High-Value Test&Evaluation Assets

    SBC: eSpin Technologies, Inc.            Topic: MDA13T010

    This STTR Phase I proposal proposes to design and develop reactive filter media using nanofiber technology to capture corrosion inducing particulate matter present in coastal region air. The fibrous filter media will be functionalized using ion exchange chemistry which is known to react with salt ions. The media will be characterized for its filtration performance, resistance to airflow, and dus ...

    STTR Phase I 2014 Department of DefenseMissile Defense Agency
  10. Cryodeposit Mitigation and Removal Techniques for Radiometric Calibration Chambers

    SBC: OPTICAL SCIENCES CORPORATION            Topic: AF12BT10

    ABSTRACT: Optical Sciences Corporation (OSC) and the University of Alabama in Huntsville"s Center for Applied Optics (UAH/CAO) will demonstrate the feasibility and present a plan for developing optical instrumentation for the monitoring, mitigation, and removal of cryodeposits accumulated on optical and mechanical surfaces in cryogenic-vacuum radiometric calibration chambers. OSC will investigat ...

    STTR Phase I 2013 Department of DefenseAir Force
US Flag An Official Website of the United States Government