Award Data

Active imaging systems are used to for imaging in degraded visual environments like that found in marine fog and other environments with a high level of attenuation and scattering from obscurants like fog, rain, smoke, and dust.These systems are still limited in range and resolution. SA Photonics is taking advantage of multiple image enhancement techniques, like wavelength tunability, pulse contro ...

The Department of the Navy has a need for the development of an additive manufacturing (AM) process for key vacuum electronic device components to meet on-demand, flexible, and affordable manufacturing requirements. The developed manufacturing method has a potential to reduce cost of vacuum electronics by as much as 70% as well as simplify and hence expedite production process of these devices by ...

The purpose of this project is to demonstrate the feasibility of using an innovative, durable, low friction, and non-toxic solid lubricant coating for foil air bearings for air cycle machines (ACM). Acrees coating provides superior wear characteristics at all temperatures and provides a substantial improvement over polyimide type coatings that are currently used on ACMs. The coating consists of tw ...

Oceanit proposes to research and develop chemical or non-chemical methods and processes to impart surface morphology modifications to aluminum-magnesium (Al-Mg) alloys to mitigate and increase the exfoliation corrosion resistance.

In this project, Citrine Informatics and the ADAPT Center at the Colorado School of Mines propose to build an informatics-driven system to understand the effects of defects in additive manufactured parts. The entire history of each sample will be captured on this system; from specific printing parameters and details of precursor materials through to part characterizations and performance measureme ...

Adhesive bonds are increasingly finding their applications in aerospace and automotive structures. The adhesive bonding gets rid of fasteners, thus reducing stress concentrations and damage initiation sites. In addition, elimination of fasteners results in significant weight savings. In order to use adhesive bonding with confidence and certify integrity of bonded structures, certain issues regardi ...

M4 Engineering, Inc. and Sandia National Laboratories propose to create a unique bonded joint analysis and design software tool. Surrogate traction-separation models will be created that efficiently capture the behavior that occurs for real bonded joints. Mixed mode loading, including compressive normal tractions and relative displacements will be captured and used in an extended cohesive zone ele ...

A scheme to implement logic gates based on nonlinear dynamic systems is proposed. This approach allows for the realization of a powerful yet flexible computing architecture. For the Phase I effort, AshRem Technologies in conjunction with California State University, Los Angeles, will analyze and the implement in hardware a flexible logic gate architecture that can be developed further to yield a r ...

To meet the U.S. Navy, specifically PMA-201, need for nondestructive evaluation (NDE) of concrete, including evaluating its strength, material properties, and damage localization, Luminit, LLC, and Southern Illinois University (SIU) propose to develop a novel Concrete Materials Characterization (COMAC) system, combining several methods of concrete characterization into a single sensor/software com ...

Friction stir welding (FSW) is an attractive joining method where high strength low porosity welds can be attained. However, the high temperatures and forces required for welding high strength materials like steel require the use of exotic tools. Cubic boron nitride (cBN)-based tools offer attractive tool wear characteristics in steels, but are very costly. Conversely, refractory metal alloys are ...