You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY22 is not expected to be complete until September, 2023.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Detection Avoidance System for Submarines (DASS)

    SBC: DANIEL H. WAGNER ASSOCIATES, INCORPORATED            Topic: N14AT016

    In this STTR, Daniel H. Wagner Associates, together with the University of Michigan (UM), will develop a Detection Avoidance System for Submarines (DASS). The proposed DASS is a set of software modules which solves the probabilistic passive sonar equation (PSE) using given environmental acoustic data, assesses submarine vulnerability based on intelligence about potential threat ASW assets, recomme ...

    STTR Phase II 2016 Department of DefenseNavy
  2. Electronic Warfare: EMS Monitor & Broadcast Training Capacity Enhancement

    SBC: Echo Ridge, LLC            Topic: AF14AT28

    ABSTRACT: Echo Ridge proposes to develop and deliver a suite of prototype EW training tools to support realistic warfighter training in the congested and contested RF environments expected in future operational engagements. The tools consist of an opposing force broadcast capability and an Electromagnetic Spectrum (EMS) monitoring capability which supports both electronic sensing (ES) and electron ...

    STTR Phase II 2016 Department of DefenseAir Force
  3. Cybersecurity within Virtualized Environments

    SBC: PROGENY SYSTEMS CORPORATION            Topic: N98115

    Tactical networks have increasing needs for greater cybersecurity and greater flexibility and resilience. By combining the advances made in the field of virtualization in terms of Type-1 (Bare Metal) Virtualization, and Introspection via the Hypervisor, a

    STTR Phase II 2016 Department of DefenseNavy
  4. Generating Material Properties From Flight Representative Structures

    SBC: MATERIALS RESEARCH & DESIGN INC            Topic: ST16C002

    High-speed flight vehicles commonly use carbon / carbon (C/C) and carbon / silicon carbide (C/SiC) for structural components. These materials are chosen because of their superior structural properties at elevated temperatures. Most often, their properties are characterized using flat and thin material test plates. While this approach is convenient, it is not guaranteed to yield material properties ...

    STTR Phase II 2018 Department of DefenseDefense Advanced Research Projects Agency
  5. Spectrum Sensing and Sharing by Cognitive Radios in Position, Navigation and Timing (PNT) Systems

    SBC: Echo Ridge, LLC            Topic: AF15AT23

    Echo Ridge proposes to prototype and demonstrate an architecture and key algorithms to support spectrum sharing for Position, Navigation, and Timing (PNT) that focuses on spectrally congested and high likelihood operational scenarios. Four key results are proposed to be delivered: 1) end-to-end Hardware-in-the-Loop (HiTL) lab demonstration of all segments of the solution in Air Force-relevant oper ...

    STTR Phase II 2016 Department of DefenseAir Force
  6. Hierarchical, Layout-Aware, Radiation Effects Tools Vertically Integrated into an EDA Design Flow for Rad-Hard by Design

    SBC: Reliable MicroSystems, LLC            Topic: DTRA16A003

    The goal of this workis to establish a radiation-aware capability in a commercial EDA design flow that will enable first-pass success in radiation resiliency for DoD ASIC designs in much the same way that existing EDA design suites ensure first pass functionality and performance success of complex ASICs destined for commercial applications.Such an integrated capability does not presently exist.The ...

    STTR Phase II 2018 Department of DefenseDefense Threat Reduction Agency
  7. High-Speed Simultaneous Multiple Object Detection System

    SBC: FREENT TECHNOLOGIES, INC.            Topic: MDA16T006

    FreEnt Technologies, Inc., A2Z Innovations, Inc., and the University of Alabama Aerospace Research Center (UAH/ARC) have teamed together to design, develop, and perform ground-based-demonstrations of a High-Speed Simultaneous Multiple Object Detection (HS-SMOD) System for MDA. The HSSMOD system uses a simple but innovative technique of a passive fiber-optic grid and high-speed COTS opto-electronic ...

    STTR Phase II 2018 Department of DefenseMissile Defense Agency
  8. Thickness Measurement Technology for Thin Films on Sapphire Substrate

    SBC: Advanced Cooling Technologies, Inc.            Topic: DMEA16B001

    Silicon-on-sapphire (SOS) integrated circuits have achieved popularity due to their high speed performance and low power consumption in radio frequency applications. An important aspect of the SOS fabrication process that must be verified to maximize yield is the thickness of the thin films deposited on the sapphire substrate. However, due to the transparent nature of sapphire, current optical met ...

    STTR Phase II 2018 Department of DefenseDefense Microelectronics Activity
  9. Ignition Modeling for Present and Future Combustors and Augmentors

    SBC: COMBUSTION RESEARCH AND FLOW TECHNOLOGY, INC.            Topic: N17AT003

    The primary objective of this effort is to develop a tractable computational tool to assess the probability of ignition within aircraft combustors and augmentors during routine igniter and/or system design analysis. This computational tool will provide for the off-line assessment of ignition probability given flowfield simulation data, characteristic igniter geometric and physical parameters, and ...

    STTR Phase II 2018 Department of DefenseNavy
  10. Durable Sol-Gel Surface Treatment to Control Cathodic Current Density

    SBC: Luna Innovations Incorporated            Topic: N14AT014

    There are numerous regions across modern aircraft that necessitate advanced corrosion solutions in order to protect and maintain their readiness. One such application is the numerous cathodic fasteners that are galvanically coupled to anodic structural materials, like high-strength aluminum alloys. There is a need to bolster corrosion protection at these locations via a user-friendly surface treat ...

    STTR Phase II 2016 Department of DefenseNavy
US Flag An Official Website of the United States Government