Award Data

UUVs have become increasingly important tools in the collection of environmental data. Their unique ability to operate independent of surface vessel conditions allows oceanographic seawater measurements when traditional means is not possible. Historically sensor packages for UUVs have been based on adaptions of ship deployed equipment. Recent development in sensors, such as the Hybrid Flow Through ...

In this STTR, OASIS Inc, with partners the Massachusetts Institute of Technology (MIT) and the Applied Physics Laboratory University of Washington (APL-UW) proposes to develop an innovative, interactive submarine acoustic counter detect TDA for use by the Submarine Mission Planners, within the AN/BYG-1. Communicating the environmental and tactical uncertainty is of primary importance when present ...

Active imaging systems are used to for imaging in degraded visual environments like that found in marine fog and other environments with a high level of attenuation and scattering from obscurants like fog, rain, smoke, and dust.These systems are still limited in range and resolution. SA Photonics is taking advantage of multiple image enhancement techniques, like wavelength tunability, pulse contro ...

Filamentation of ultra-short laser pulse propagation in non-linear media offers significant potentials allowing to address numerous problems in military and commercial sectors. However, practical implementation of this requires an ability to control the USLP at its propagation through inhomogeneous media, like turbulent atmosphere. On the basis of our approach for combating turbulence effects on p ...

Ultra-short pulse lasers have advantages over continuous-wave lasers for directed-energy applications due to the high peak powers that can be reached. Directed-energy weapons are profoundly limited by the aberrations caused by atmospheric turbulence and current adaptive optics can correct for these aberrations only when the propagation medium is reciprocal. Unfortunately, nonlinear effects in the ...

Filamentation of ultra-short laser pulse propagation in non-linear media offers significant potentials allowing to address numerous problems in military and commercial sectors. However, practical implementation of this requires an ability to control the USLP at its propagation through inhomogeneous media, like turbulent atmosphere. On the basis of our approach for combating turbulence effects on p ...

Physical Sciences Inc. (PSI) will develop novel feedstocks for 3D printing of lithium-ion batteries using existing additive manufacturing technologies. Lithium-ion batteries simultaneously offering high energy and power density energy will be demonstrated using the novel feedstock materials. PSI’s proprietary HA coating technology will be utilized in the feedstock formulations to maximize active ...

The Department of the Navy has a need for the development of an additive manufacturing (AM) process for key vacuum electronic device components to meet on-demand, flexible, and affordable manufacturing requirements. The developed manufacturing method has a potential to reduce cost of vacuum electronics by as much as 70% as well as simplify and hence expedite production process of these devices by ...

The Department of the Navy has a need for the development of an additive manufacturing (AM) process for key vacuum electronic device components to meet on-demand, flexible, and affordable manufacturing requirements. The goal of this Phase II effort is to develop and validate Electron Beam Melting (EBM) additive manufacturing (AM) technology for the production of vacuum electronic devices meeting t ...

SA Photonics has developed a concept for our Multiple Optical Beam Landing System (MOBLS) to provide autonomous landing of aircraft in RF denied environments. MOBLS utilizes multiple, redundant methods to determine the real-time location and bearing of the aircraft relative to the carrier-based landing strip. By having built in redundant modalities, MOBLS provides highly reliable landing informati ...