You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Active Imaging through Fog

    SBC: SA Photonics, Inc.            Topic: N18AT021

    Active imaging systems are used to for imaging in degraded visual environments like that found in marine fog and other environments with a high level of attenuation and scattering from obscurants like fog, rain, smoke, and dust.These systems are still limited in range and resolution. SA Photonics is taking advantage of multiple image enhancement techniques, like wavelength tunability, pulse contro ...

    STTR Phase I 2018 Department of DefenseNavy
  2. Adaptive and Smart Materials for Advanced Manufacturing Methods

    SBC: Nextgen Aeronautics, Inc.            Topic: AF17AT018

    Additive manufacturing (AM) technologies covering a broad range of technologies and processes have been under continuous and accelerating development since the 80s. While there are still fundamental hurdles such as low production rates and small sizes, AM holds tremendous promise in terms of revolutionizing manufacturing. Recent trends include direct-printing and incorporating sensors and electr ...

    STTR Phase I 2017 Department of DefenseAir Force
  3. Adaptive Optics controlled nonlinear propagation of USLP

    SBC: Advanced Systems & Technologies Inc            Topic: N17AT024

    Filamentation of ultra-short laser pulse propagation in non-linear media offers significant potentials allowing to address numerous problems in military and commercial sectors. However, practical implementation of this requires an ability to control the USLP at its propagation through inhomogeneous media, like turbulent atmosphere. On the basis of our approach for combating turbulence effects on p ...

    STTR Phase I 2017 Department of DefenseNavy
  4. Adaptive Optics for Nonlinear Atmospheric Propagation of Laser Pulses

    SBC: TOYON RESEARCH CORPORATION            Topic: N17AT024

    Ultra-short pulse lasers have advantages over continuous-wave lasers for directed-energy applications due to the high peak powers that can be reached. Directed-energy weapons are profoundly limited by the aberrations caused by atmospheric turbulence and current adaptive optics can correct for these aberrations only when the propagation medium is reciprocal. Unfortunately, nonlinear effects in the ...

    STTR Phase I 2017 Department of DefenseNavy
  5. Adaptive Optics for Nonlinear Atmospheric Propagation of Laser Pulses

    SBC: Advanced Systems & Technologies Inc            Topic: N17AT024

    Filamentation of ultra-short laser pulse propagation in non-linear media offers significant potentials allowing to address numerous problems in military and commercial sectors. However, practical implementation of this requires an ability to control the USLP at its propagation through inhomogeneous media, like turbulent atmosphere. On the basis of our approach for combating turbulence effects on p ...

    STTR Phase II 2018 Department of DefenseNavy
  6. Additive Manufacturing for Microwave Vacuum Electron Device Cost Reduction

    SBC: Radiabeam Technologies, LLC            Topic: N16AT010

    The Department of the Navy has a need for the development of an additive manufacturing (AM) process for key vacuum electronic device components to meet on-demand, flexible, and affordable manufacturing requirements. The goal of this Phase II effort is to develop and validate Electron Beam Melting (EBM) additive manufacturing (AM) technology for the production of vacuum electronic devices meeting t ...

    STTR Phase II 2018 Department of DefenseNavy
  7. Advanced Hit Detection Systems

    SBC: FREENT TECHNOLOGIES, INC.            Topic: MDA13015

    FreEnt Technologies, Inc. (FreEnt) and Johns Hopkins Universitys Applied Physics Laboratory (APL) are proposing a multiple-hit detection sensor called the Optical Lethality Measurement System (OLMS). This system is based on the Planar Optical Penetration Sensor (POPS) technology (originally developed and patented by APL) and prior art associated with the Blast Initiation Detector (BID). The BID is ...

    STTR Phase II 2017 Department of DefenseMissile Defense Agency
  8. Advanced Printed Circuit Board Design Methods for Compact Optical Transceiver

    SBC: ATTOLLO ENGINEERING, LLC            Topic: A15AT001

    As the warfighter is increasingly using more highly integrated instruments, e.g. a laser rangefinder (LRF) combined with a laser designator and an imager, the need to decrease the size of these components becomes more important.Compact small munition applications of rangefinders particularly place an emphasis on size of the optical front end.In order to make the transceiver more compact, special a ...

    STTR Phase II 2017 Department of DefenseArmy
  9. AgileBeam Reconfigurable Free Space Optical Communication System

    SBC: SA Photonics, Inc.            Topic: AF18AT010

    Free Space Optical (FSO) communication systems provide many benefits for satellite communications, including high data rates and low Size, Weight and Power (SWaP) compared to traditional RF communication systems.Additionally, FSO systems operate without RF emissions and are inherently immune to RF interference and jamming.The narrow optical beams and small Field-of-View of the optical receivers al ...

    STTR Phase I 2018 Department of DefenseAir Force
  10. Aircraft Carrier-based Precision Ship-Relative Navigation Guidance for Aircraft Landing under Emissions Control Conditions

    SBC: SA Photonics, Inc.            Topic: N15AT014

    SA Photonics has developed a concept for our Multiple Optical Beam Landing System (MOBLS) to provide autonomous landing of aircraft in RF denied environments. MOBLS utilizes multiple, redundant methods to determine the real-time location and bearing of the aircraft relative to the carrier-based landing strip. By having built in redundant modalities, MOBLS provides highly reliable landing informati ...

    STTR Phase II 2017 Department of DefenseNavy
US Flag An Official Website of the United States Government