You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Interference Coatings for High Energy and Average Power Femtosecond-class Lasers in the 0.8-2um Wavelength Range

    SBC: XUV LASERS, INC.            Topic: 28e

    The problem/situation that is being addressed concerns the development of ultrafast coatings that will meet the specifications of the DoE solicitation: “broad-bandwidth, laser damage threshold of 0.5 J/cm2 (1 ps), engineered using a process that is scalable to large areas.” Development of interference coatings (ICs) with superior laser damage is strongly motivated by the needs to scale near in ...

    STTR Phase II 2020 Department of Energy
  2. Key Components for the Implementation of High Repetition Rate Petawatt-class Lasers

    SBC: XUV LASERS, INC.            Topic: 25c

    Ultra-high power, ultrashort pulse lasers systems are the central tool driving many of the recent advances in high energy density plasma science. They enable the generation of high energy density relativistic plasmas, bright x-ray and gamma–ray bursts, energetics particle beams and neutrons, and drive applications such as shadowgraphy of inertial confinement fusion targets and fast ignition. How ...

    STTR Phase II 2020 Department of Energy
  3. Infinitely Recyclable Bioplastics

    SBC: SUSMER INC            Topic: 08b

    Plastics are indispensable materials for modern life and the global economy, but current practices in the generation, use, and disposal of commodity plastics are largely unsustainable, causing severe worldwide plastics pollution and enormous energy and materials value loss in the economy. In particular, plastics are a material of choice in packaging applications, but they are currently designed fo ...

    STTR Phase II 2020 Department of Energy
  4. Recovery of Glass Fiber Reinforcement from Retired Wind Turbine Blades for Recycled Composite Materials

    SBC: CARBON RIVERS LLC            Topic: 15c

    By 2050 43,400,000 metric tons of cumulative wind turbine blade waste is expected to exist and continue growing at 2,000,000 metric tons/year globally. Even in the near term, wind turbine blade waste generation is expected to approach 1,000,000 metric tons/year by 2029. In short, the amount of wind turbine blade waste needing disposal is growing rapidly while the status quo option of landfilling, ...

    STTR Phase II 2020 Department of Energy
  5. Novel Circulating RNA-based Markers as Diagnostic Biomarkers of Infectious Diseases

    SBC: CFD RESEARCH CORPORATION            Topic: CBD18A001

    In resource limited settings, rapid and accurate diagnosis of infections is critical for managing potential exposures to highly virulent pathogens, whether occurring from an act of bioterrorism or a natural event. This is especially important for hard to detect intracellular bacterial and alphavirus infections, that overlap symptomatically and often treated empirically due to a lack of reliable an ...

    STTR Phase II 2020 Department of DefenseOffice for Chemical and Biological Defense
  6. CORC; Cable Based High Field Hybrid Magnets for Future Colliders

    SBC: ADVANCED CONDUCTOR TECHNOLOGIES LLC            Topic: 26b

    "The next generation of very high field accelerator magnets (20 T or more) are expected to be made with high-temperature superconductors (HTS) along with conventional low-temperature superconductors (LTS) to reduce cost. The operation and protection of these magnets becomes very challenging particularly if the HTS coils are made with the tapes and operate at a much lower current than the LTS coils ...

    STTR Phase II 2018 Department of Energy
  7. Scaleup of a Combined Spray Pyrolysis and Fluidized-bed Reactor Method for the Production of High Performing Layered Nickel- rich Cathode Materials as a Continuous Process

    SBC: HAZEN RESEARCH, INC.            Topic: 14a

    To increase the utilization of electric vehicles, the US Department of Energy is seeking to reduce the cost of electric vehicle batteries to less than $125/kWh by 2022. To achieve this goal, the costs of cathode materials, which account for approximately 30% of the cost of vehicle batteries, must be reduced significantly. To address the challenge of lowering the costs of advanced lithium battery c ...

    STTR Phase II 2018 Department of Energy
  8. Demonstration of the technological capability for production of neutron-focusing nickel mirrors

    SBC: ELECTROFORMED NICKEL INC            Topic: 15a

    Neutron scattering is one of the most useful methods of studying the structure and dynamics of matter. These methods require large installations at national laboratories, such as Oak Ridge National Laboratory (ORNL), National Institute of Standards and Technology (NIST) and other facilities constructed or planned in the US and around the world. These facilities serve a large and diverse community ...

    STTR Phase II 2018 Department of Energy
  9. Innovative Mitigation of Radiation Effects in Advanced Technology Nodes

    SBC: MICROELECTRONICS RESEARCH DEVELOPMENT CORPORATION            Topic: DTRA16A003

    Micro-RDC has developed portable radiation effects test structures that scale to new process nodes.These structures will enable the investigation of the effects of radiation on the new technology from the material processing level as well as the circuit level.Fabricating the chosen structures and the refinement of software to extract the model parameters will be completed in this effort.A suite of ...

    STTR Phase II 2018 Department of DefenseDefense Threat Reduction Agency
  10. Hierarchical, Layout-Aware, Radiation Effects Tools Vertically Integrated into an EDA Design Flow for Rad-Hard by Design

    SBC: RELIABLE MICROSYSTEMS LLC            Topic: DTRA16A003

    The goal of this workis to establish a radiation-aware capability in a commercial EDA design flow that will enable first-pass success in radiation resiliency for DoD ASIC designs in much the same way that existing EDA design suites ensure first pass functionality and performance success of complex ASICs destined for commercial applications.Such an integrated capability does not presently exist.The ...

    STTR Phase II 2018 Department of DefenseDefense Threat Reduction Agency
US Flag An Official Website of the United States Government