You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Integrated Reacting Fluid Dynamics and Predictive Materials Degradation Models for Propulsion System Conditions

    SBC: CFD Research Corporation            Topic: T1202

    Computational fluid dynamics (CFD) simulations are routinely used by NASA to optimize the design of propulsion systems. Current methods for CFD modeling rely on general materials properties to determine fluid structure interactions. This introduces uncertainty when modeling extreme conditions, where materials degrade and properties may change as a consequence. This also limits the use of CFD as a ...

    STTR Phase I 2015 National Aeronautics and Space Administration
  2. Improved Forecasting of Solar Particle Events and their Effects on Space Electronics

    SBC: CFD Research Corporation            Topic: T602

    High-energy space radiation from Galactic Cosmic Rays and Solar Particle Events (SPEs) pose significant risks to equipment and astronaut health in NASA missions. In particular, energetic particles from SPEs associated with flares and coronal mass ejections (CMEs) constitute a highly dynamic and penetrating radiation environment that may adversely affect not only beyond-Low-Earth-Orbit missions, bu ...

    STTR Phase I 2015 National Aeronautics and Space Administration
  3. Multiple High-Fidelity Modeling Tools for Metal Additive Manufacturing Process Development

    SBC: CFD Research Corporation            Topic: T1204

    Despite the rapid commercialization of additive manufacturing technology such as selective laser melting, SLM, there are gaps in process modeling and material property prediction that contribute to slow and costly process development, process qualification and product certification. To address these gaps, CFDRC and our partner Dr. Kevin Chou, University of Alabama, will develop multiple computatio ...

    STTR Phase II 2015 National Aeronautics and Space Administration
  4. Multi Domain Modeling for Space Systems

    SBC: METAMORPH INC            Topic: T1102

    A comprehensive model-based approach will be enabled for space systems design via the work started on Phase I of this project. The OpenMETA toolkit is a cyber-physical modeling tool for the design and virtual integration of complex systems, developed under the DARPA AVM Program. OpenMETA will be leveraged and extended to support NASA/JPL goals for multi-physics, multi-domain modeling, analysis, ...

    STTR Phase I 2015 National Aeronautics and Space Administration
  5. A Novel, Microscale, Distributable Sensor Technology for Ionizing Radiation

    SBC: CFD Research Corporation            Topic: DTRA14B004

    Terrorist use of radioactive nuclear materials via nuclear and/or radiological dispersion devices (dirty bombs) is a serious threat. Therefore, it is critical to detect the proliferation of nuclear material. Critical challenges facing this objective include: (a) high sensitivity detection of signature emissions (e.g., gamma rays) from common radioactive isotopes behind shielding, and (b) cost-effe ...

    STTR Phase I 2015 Department of DefenseDefense Threat Reduction Agency
  6. ACE Booster

    SBC: Gloyer-Taylor Laboratories Inc.            Topic: T102

    GTL has been developing a suite of transformational technologies that have the capability to disrupt the traditional launch vehicle paradigm. BHL composite cryotank technology provides a four times improvement over large aluminum iso-grid tanks, offering a 6 percentage point improvement in small stage PMF. Superior Stability Engine is an innovative liquid rocket engine configured to maximize comb ...

    STTR Phase II 2015 National Aeronautics and Space Administration
  7. Advanced Hybrid Stage

    SBC: Gloyer-Taylor Laboratories Inc.            Topic: T101

    The proposed technology builds off GTL's advanced solid ramjet fuel. The method uses additive manufacturing methods to produce an innovative new type of fuel grain that regresses quickly and has a high Isp and combustion efficiency. With this technology, the performance of a liquid rocket engine can be had with a hybrid rocket system. This technology allows for a simple, low cost, high performanc ...

    STTR Phase I 2015 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government