You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Reliable Manufacturing of Scandia-Doped Tungsten Powders for Thermionic Cathodes

    SBC: NGIMAT, LLC            Topic: N15AT010

    In this STTR effort nGimat will partner with the University of Kentucky to develop a new process for manufacturing scandia-doped tungsten powder for use in vacuum tube cathode devices. While a significant amount of research over the last several decades has shown promise for scandate cathode materials, reliable manufacturing processes that enable commercialization of this technology have remained ...

    STTR Phase I 2015 Department of DefenseNavy
  2. Improved Turbulence Modelling Across Disparate Length Scales for Naval Computational Fluid Dynamics Applications

    SBC: COMPUTATIONAL SCIENCES LLC            Topic: N15AT002

    Computational Sciences LLC will collaborate with the Rensselaer Polytechnic Institute (RPI) to develop and validate a stand-alone computational module that naturally accounts for the effects of turbulence. Such fluctuations and transitions may be associated with compressible flows and boundary layer interactions. The module will be designed for implementation in to existing legacy codes for use in ...

    STTR Phase I 2015 Department of DefenseNavy
  3. Grid-Spacing-Independent and Discretization-Order-Independent Simulation for Naval Single-Phase and Two-Phase Flow Applications

    SBC: Kord Technologies, Inc.            Topic: N15AT002

    Turbulent shear flows in naval applications are characterized by vastly different lengths and time scales associated with rotor tip vortices and the vortical structures shed from the ship, and additional phase from water drops and water vapor. To tackle the modeling challenges, we propose a novel methodology that combines a vorticity preserving method and a new approach to LES turbulence modeling ...

    STTR Phase I 2015 Department of DefenseNavy
  4. Novel Approach to Hybrid High Temperature Superconducting Cable

    SBC: Tai-Yang Research Company            Topic: N15AT016

    To handle the so-called black start fault contingency, Energy to Power Solutions proposes the use of a novel hybrid cable design. The cable would be designed to handle the full 100 % electric power load under normal operating and battle conditions (i.e. a fully/partially functioning cryogenic cooling system operating at cryogenic temperatures ~ 50-60 K), and capable of handling 30 % of the rated p ...

    STTR Phase I 2015 Department of DefenseNavy
  5. GaN for High Rep Rate Pulsed Power

    SBC: KYMA TECHNOLOGIES, INC.            Topic: N15AT023

    Kyma will develop and model a modular high rep rate (>100kHz) photoconductive switch using GaN and commercial-off-the-shelf laser diodes. The switch will be designed to switch >1.5kV at >150A in 5-10ns.

    STTR Phase I 2015 Department of DefenseNavy
  6. A Novel, Microscale, Distributable Sensor Technology for Ionizing Radiation

    SBC: CFD Research Corporation            Topic: DTRA14B004

    Terrorist use of radioactive nuclear materials via nuclear and/or radiological dispersion devices (dirty bombs) is a serious threat. Therefore, it is critical to detect the proliferation of nuclear material. Critical challenges facing this objective include: (a) high sensitivity detection of signature emissions (e.g., gamma rays) from common radioactive isotopes behind shielding, and (b) cost-effe ...

    STTR Phase I 2015 Department of DefenseDefense Threat Reduction Agency
US Flag An Official Website of the United States Government