You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Epitaxial GaN on flexible metal tapes for low-cost transistor devices
SBC: IBEAM MATERIALS, INC. Topic: 1GaN-based devices are the basis of a variety of modern electronics applications, especially in optoelectronics and high-frequency / high-power electronics. These devices are based on epitaxial films grown on single-crystal wafers. The single-crystal wafer substrates are limiting because of their size, expense, mechanical properties and availability. If one could make GaN-based devices over large a ...
STTR Phase II 2014 Department of EnergyARPA-E -
Superconducting Wollaston Prism for Spin Echo Scattering Angle Measurement
SBC: ADELPHI TECHNOLOGY INC Topic: 09bNeutron Scattering has been an extremely productive materials science probe for over 60 years. It is no exaggeration to say that any technology that uses plastics has benefitted from it in some way from Small Angle Neutron Scattering (SANS). Unfortunately, SANS is limited to studying molecular structures with sizes between 1 to 100 nm and so often misses larger details. Similarly, neutron radiogra ...
STTR Phase II 2014 Department of Energy -
Nano-Patterned Cathode Surfaces for High Efficiency Photoinjectors
SBC: RADIABEAM TECHNOLOGIES, LLC Topic: 05aPresent day photoinjector cathodes have poor lifetime or inadequate quantum efficiency for advanced applications. In addition, the efficiency is constrained by the frequency up-conversion in the drive laser from infrared to ultraviolet photons. Novel nanofabrication techniques allow for the sub-wavelength patterning of hole array surfaces on the cathode. Exploiting the surface plasmon resonance co ...
STTR Phase II 2014 Department of Energy -
Realization of Large Foot-Print Multi-layer- High Temperature Capacitors with Novel Dielectric Materials and Rapid Novel Thermal Spray Deposition Routes
SBC: DRS RESEARCH Topic: 01aThis project is about development of novel multilayer dielectric capacitors via thermal spray coating route. Use of this technology will enable mass production of multilayer ceramic capacitors at lower cost.
STTR Phase II 2014 Department of Energy -
Vertical GaN Substrates
SBC: SIXPOINT MATERIALS, INC. Topic: DEFOA0000941SixPoint Materials will create low-cost, high-quality vertical gallium nitride (GaN) substrates using a multi-phase production approach that employs both hydride vapor phase epitaxy (HVPE) technology and ammonothermal growth techniques to lower costs and maintain crystal quality. Substrates are thin wafers of semiconducting material needed for power devices. In its two-phase project, SixPoint Mate ...
STTR Phase II 2014 Department of EnergyARPA-E -
Comprehensive Time-Resolved Molecular Speciation Of Gaseous And Particulate Organic Constituents In The Atmosphere
SBC: AEROSOL DYNAMICS INC Topic: 17dOrganic chemicals comprise the dominant fraction of particulates found in atmospheric aerosols, and the largest proportions of these are secondary products formed in the atmosphere from oxidation of volatile organic compounds. Often these chemical transformations result from complex pathways involving species from different sources. To understand these processes, we need to be able to trace the ...
STTR Phase II 2015 Department of Energy -
Automatic Calibration of High-Performance Metrological Instrumentation
SBC: Abeam Technologies Inc. Topic: 04cMetrology is a multi-billion dollar industry that is an indispensable part of science and manufacturing. A variety of techniques including interferometric microscopes, scanning electron microscopes (SEM), X-ray, and atomic force microscopes (AFM) are used in X-ray mirror manufacturing. The performance of any tool directly depends on the ability to characterize and tune it ...
STTR Phase II 2015 Department of Energy -
A Diagnostic for Simultaneous Liquid and Vapor Distribution in Sprays Using Filtered Rayleigh and Mie Scattering
SBC: METROLASER, INCORPORATED Topic: 07dNew automotive engine technologies, such as direct injection with stratified charge combustion, are being explored under programs of the DOE and others that offer significant increases in efficiency and reductions in emissions. Research tools are needed to help determine how best to adequately control the combustion process throughout the engine operating envelope, to optimize combustion efficienc ...
STTR Phase II 2015 Department of Energy -
Development of Nuclear Quality Components Using Metal Additive Manufacturing
SBC: RADIABEAM SYSTEMS, LLC Topic: 19fA major problem with nuclear fission reactors is the welding of components of dissimilar metals, where the filler is usually of an additional metal alloy that is not necessarily the same as the two parts to be joined. Welding of metals will often have a heat affected zone (HAZ) and a thermo- mechanically affected zone (TMAZ), which need to be post-weld heat treated to minimize precipitation or seg ...
STTR Phase II 2015 Department of Energy -
MK III Upper Extremity Exoskeleton
SBC: Ekso Bionics Inc Topic: 739552As the carry and protective gear of the modern war fighter increases, the burden on the human body will necessarily increase. In our present TALOS MkIII project, we are developing lower body augmentation to preserve speed and agility while bearing this weight. Yet we cannot ignore the impact of this weight on the upper body: in this project we propose to develop an upper body exoskeleton with p ...
STTR Phase II 2015 Department of DefenseSpecial Operations Command