You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. 26(a): High Duty Cycle Inverse Free Electron Laser

    SBC: RADIABEAM TECHNOLOGIES, LLC            Topic: 26a

    Laser based advanced accelerators can achieve very high accelerating gradients, but their duty cycle is limited by the laser power availability and media recovery time. Inverse Free Electron Laser (IFEL) is a vacuum farfield laser accelerator scheme which does not rely on a medium (plasma) or a structure (metal or electric) and therefore is potentially capable of accelerating charged particles ver ...

    STTR Phase II 2016 Department of Energy
  2. Algal Bioflocculation for SolidLiquid Separation

    SBC: MICROBIO ENGINEERING INC            Topic: 12c

    A key requirement for microalgae biofuels production is a very low cost harvesting technology. Commercially available solidliquid separation technologies applicable to microalgae, such as chemical coagulation, membrane separations and centrifugation, are too costly for biofuels production or other lowcost microalgae processes, such as wastewater treatment. A low cost harvesting process is bio floc ...

    STTR Phase II 2016 Department of Energy
  3. Development of Low Cost Magnetocaloric Nanomaterials for Sub 80oK Refrigeration Applications

    SBC: GENERAL ENGINEERING & RESEARCH, L.L.C.            Topic: 12

    Replacement of petroleum based vehicles with fuel cell electric vehicles operating on hydrogen produced from domestically available resources would dramatically decrease emissions of greenhouse gases and other pollutants as well as reduce dependence on oil from politically volatile regions of the world. One major inhibitor to a hydrogen society is the lack of infrastructure, which requires hydroge ...

    STTR Phase I 2016 Department of Energy
  4. Organic-Inorganic Hybrid Nanocomposite as Radiation-resistant Electrical Insulator

    SBC: INNOSENSE CORPORATION            Topic: 20

    The Department of Energy needs improved radiation resistant electrical insulation materials for the superconducting magnet coils in fusion reactors. To achieve safe, reliable, economic and environmentally benign fusion energy system, DOE is seeking organic/inorganic insulation-capable materials that are wrappable. These materials under irradiation will enable magnet coils to: (1) operate reliably ...

    STTR Phase I 2016 Department of Energy
  5. High Gradient Accelerating Structure for Low Energy Protons

    SBC: RADIABEAM SYSTEMS, LLC            Topic: 25

    Currently, the most promising types of radiotherapy is proton or carbon therapy, as they have demonstrated significant improvements in clinical efficiency and reduced toxicity profiles. Unfortunately, the high cost of treatments using both proton and carbon beams is the limiting factor preventing hadron therapy from becoming the standard of care for a wider range of cancers. Designing a linear acc ...

    STTR Phase I 2016 Department of Energy
  6. Retrofittable and Transparent Super-Insulator for Single-Pane Windows

    SBC: NANOSD, INC.            Topic: DEFOA0001429

    NanoSD, Inc. with its partners will develop a transparent, nanostructured thermally insulating film that can be applied to existing single-pane windows to reduce heat loss. To produce the nanostructured film, the team will create hollow ceramic or polymer nanobubbles and consolidate them into a dense lattice structure using heat and compression. Because it is mostly air, the resulting nanobubble s ...

    STTR Phase II 2016 Department of EnergyARPA-E
  7. High power, magnet-free, circulator using angular-momentum biasing of a resonant ring

    SBC: CALABAZAS CREEK RESEARCH, INC.            Topic: 25

    There is a continuing need for high power circulators to protect the next generation of high power RF sources from waveguide reflections that can destroy the device. Currently, the power level of circulators is limited by the materials, specifically ferrites that provide the required non-reciprocal operation. New approaches are required that use materials capable of very high power operation. Stat ...

    STTR Phase I 2016 Department of Energy
  8. Development of powder bed printing (3DP) for rapid and flexible fabrication of energetic material payloads and munitions

    SBC: MAKEL ENGINEERING, INC.            Topic: DTRA16A001

    This program will demonstrate how additive manufacturing technologies can be used with reactive and high energy materials to create rapid and flexible fabrication of payload and munitions. Our primary approach to this problem will be to use powder bed binder printing techniques to print reactive structures. The anticipated feedstock will consist of composite particles containing all reactant spe ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  9. Fully Metallic Self-Fragmenting Structural Reactive Materials Using Composites and Alloys Comprised of Aluminum, Lithium, and Magnesium

    SBC: Adranos Energetics LLC            Topic: DTRA16A002

    While aluminum casing materials provide some enhanced performance and thermal loading to explosive ordinance, their overall effectiveness is highly limited by incomplete combustion and long residence times. In order to reduce these problems, the casing material must be designed to facilitate rapid fragmentation through either specialized casing geometries or greatly refined initial particle sizes. ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  10. Innovative Mitigation of Radiation Effects in Advanced Technology Nodes

    SBC: RELIABLE MICROSYSTEMS LLC            Topic: DTRA16A003

    Establish a radiation-aware analysis capability in a commercial EDA design flow that will enable first-pass success in radiation-hardened by design (RHBD) for DoD ASICs in much the same way that existing EDA design suites ensure first pass functionality and performance success of complex ASICs destined for commercial applications. Layout-aware, calibrated single-event radiation models that captur ...

    STTR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
US Flag An Official Website of the United States Government